Dell 2150cdn User Guide
Have a look at the manual Dell 2150cdn User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Maintaining Your Printer399 Entering Values When Using the Operator Panel Using the operator panel, enter the values found in the color registration chart to make adjustments. 1 Press the (Menu) button. 2Press button until Admin Menu appears, and then press the (Set) button. 3Press button until Maintenance appears, and then press the (Set) button. 4Press button until Color Reg Adj appears, and then press the (Set) button. 5Press button until Enter Number appears, and then press the (Set) button. 6Ensure that the cursor is displayed at the value under LY and press or button to specify the values.
400Maintaining Your Printer 7Press button to move the cursor to the next value. 8Press the (Set) button. The cursor is displayed at the value under RY. 9Repeat steps 6 to 8 to enter the desired values, and then press the (Set) button. NOTE: You can specify each value for process, left, and right colors (LY, LM, LC, RY, RM, RC, PY, PM, and PC) by repeating the steps 6 to 8. 10Press and until ColorReg Chart appears, and then press the (Set) button. The Are you sure? message appears on the operator panel. 11Press the (Set) button. NOTE: To cancel printing the color registration chart, press the (Cancel) button. The color registration chart with the new values is printed. If the straightest line is not at the value of 0, adjust the values again. Checking the charts before and after the adjustments will help you to determine the values to enter. When Using the Tool Box NOTE: Using the Tool Box, enter the values that you found in the color registration chart to make adjustments. 1 Click Star t All Programs Dell Printers Dell 2150 Color Printer Tool Box. NOTE: The Select Printer dialog box opens in this step when multiple printer drivers are installed on your computer. In this case, click the name of this printer listed in Printer Names, and then click OK. The Tool Box opens. 2Click the Printer Maintenance tab. 3Select Color Registration Adjustment from the list at the left side of the page. The Color Registration Adjustment page is displayed.
Maintaining Your Printer401 4Select the value with the straight line, and then click the Apply New Settings button. 5Click the Star t button next to Print Color Regi Chart. The color registration chart is printed with the new values. 6Adjust till all straight lines are at the value of 0. Show image of before and after adjustment will help. After printing the color registration chart, do not turn off the printer until the printer motor has stopped running. NOTE: If 0 is not next to the straightest lines, determine the values and adjust the printer again.
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY Removing Options403 26 Removing Options If the printer location needs to change or the printer and print media handling options need to be shipped to a new location, all print media handling options must be removed from the printer. For shipping, pack the printer and print media handling options securely to avoid damage. Removing the Optional Memory Module CAUTION: When you remove the optional memory module, be sure to turn off the printer, unplug the power cable, and disconnect all cables from the back of the printer before starting these tasks. 1Ensure that the printer is turned off and unplug all the cables including the power cable from the back of the printer. 2Turn the screw on the control board cover counterclockwise. 3Open the control board cover. NOTE: Remove the control board cover by pulling it upward until the lower hinge is out of the slit, and then pull the cover towards you and remove it.
404Removing Options FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section26.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY 4Push the clips on both sides of the slot outward to raise the memory module up. 5Hold the memory module and pull it straight out.
Removing Options405 FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section26.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY 6Install the control board cover. NOTE: Insert the upper hinge of the control board cover into the upper slit on the printer. Next, insert the lower hinge of the control board cover into the lower slit of the printer. 7Close the control board cover and turn the screw clockwise.
406Removing Options FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section26.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY 8Turn on the printer. Removing the Optional 250-Sheet Feeder CAUTION: When you remove the optional 250-sheet feeder, be sure to turn off the printer, unplug the power cable, and disconnect all cables from the back of the printer before starting these tasks. 1Turn off the printer and unplug the power cable. Then, disconnect all cables from the back of the printer. 2Pull the standard 250-sheet tray out of the printer about 200 mm. Hold the tray with both hands, and remove it from the printer. 3Remove the two screws joining the printer and the optional 250-sheet feeder by unscrewing them with a coin or similar object.
Removing Options407 FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section26.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY NOTE: The screw hole is located in 216 mm recess from the front of the printer. 4Gently lift the printer off the tray module, and place it on a level surface. CAUTION: Two people are required to lift the printer. The printer should be lifted holding the front and back. Never lift the printer from its sides. 5Insert the standard 250-sheet tray into the printer, and push until it stops.
408Removing Options FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section26.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY NOTICE: Do not use excessive force on the tray. Doing so could damage the tray or the inside of the printer. 6Reconnect all cables including the power cable into the back of the printer and turn on the printer. Removing the Optional Wireless Adapter CAUTION: When you remove the optional wireless adapter, be sure to turn off the printer, unplug the power cable, and disconnect all cables from the back of the printer before starting these tasks. 1Ensure that the printer is turned off. 2Turn the screw on the control board cover counterclockwise and open the cover. 3Remove the control board cover.