Dell 2150cdn User Guide

							Dell Printer Configuration Web Tool199
To initialize NVRAM (non-volatile RAM) for the network feature and reboot 
the printer. You can also initialize NVRAM of the printer from Reset Defaults 
in the Printer Settings menu.
Va l u e s :
Security
The Security tab includes Set Password, SSL/TLS, IPsec, 802.1x and IP 
Filter (IPv4).
Set Password
Purpose:
To set or change the password that is required to access the setup parameters of 
the printer from the Dell Printer Configuration Web Tool.
Set the password of the operator panel from Panel Lock in the Printer Settings. 
This page can also be displayed by clicking Set Password in the Left Frame.
 NOTE: To restore the password to the default (NULL), initialize the non-volatile 
memory (NVM).
Va l u e s :
Initialize NIC 
NVRAM Memory and 
restart printer.Click the Star t button to initialize NVRAM, revert network 
settings to the factory default settings, and reboot the network 
capability.
Restart PrinterClick the Start button to reboot the printer.
Administrator PasswordSets the password using up to 10 alphanumeric characters. 
Re-enter Administrator 
PasswordConfirms the set password.
Access denial by the 
authentication failure of 
the AdministratorSets the amount of time the administrator should wait for 
the access to the printer setup from Dell Printer 
Configuration Web Tool. Sets the time period from 5 up 
to 255 seconds. The access is denied if the time-out time is 
exceeded. If you set 0, this mode is disabled.
 
						

							200Dell Printer Configuration Web Tool
SSL/TLS
Purpose:
To specify the settings for the SSL encryption communication to the printer.
Va l u e s :
SSL/TLS (Generate Self-Signed Certificate)
Purpose:
To generate a self-signed certificate.
Va l u e s :
SSL/TLSHTTP-SSL/TLS 
Communication*1Select the check box to enable the HTTP-
SSL/TLS Communication.
HTTP-SSL/TLS 
Communication Port 
NumberSets the port number, which is not identical with 
that of HTTP for SSL/TLS. This must be 443 or 
between 8,000 and 9,999.
Machine 
Digital 
CertificationGenerate Self-
Signed Certificate
*2Click this button to display the Generate Self-
Signed Certificate page. 
Certificate Details
*3Click this button to display the Certificate 
Details page for the contents of the certificate or 
to delete the certificate. 
*1This item is enabled only when you generate the self-signed certificate on the Gen-
erate Self-Signed Certificate page.
*2This button is grayed out after you generate the self-signed certificate on the Gener-
ate Self-Signed Certificate page.
*3This button is available only when HTTP-SSL/TLS Communication is set to 
Enable.
Generate 
Self-Signed 
CertificateSize of Public KeySets the size of public key.
IssuerSets the issuer of the self-signed certificate.
Generate Signed CertificateClick this button to generate the signed 
certificate.
BackClick this button to go back to the previous page.
 
						

							Dell Printer Configuration Web Tool201
SSL/TLS (Certificate Details)
Purpose:
To refer to the contents of the certificate or delete the certificate.
Va l u e s :
IPsec
Purpose:
To specify the Security Architecture settings for Internet Protocol (IPsec) for 
encrypted communication to the printer.
Va l u e s :
Certificate 
DetailsCategoryDisplays the category of the device to certificate.
Issued ToDisplays the device to certificate.
IssuerDisplays the issuer of the self-signed certificate.
Serial NumberDisplays the serial number of the device.
Size of Public KeyDisplay the size of public key.
Va l i d  F r o mDisplays the time the certificate is valid.
Va l i d  U n t i lDisplays the time the certificate is invalid.
Statu sDisplays whether the certificate is valid or not.
Certificate PurposeDisplays the purpose of certificate.
Certificate Selection 
Statu sDisplays the type of device certificate you 
selected.
DeleteClick this button to delete the self-signed 
certificate. 
BackClick this button to go back to the previous page.
 
						

							202Dell Printer Configuration Web Tool
 NOTE: If IPsec is enabled with incorrect settings, you must disable it using the 
Reset IPsec menu on the operator panel.
802.1x
Purpose:
To specify the settings for IEEE 802.1x authentication for encrypted 
communication to the printer.
Va l u e s :
IPsec Settings ProtocolSelect the check box to enable the protocol.
IKESets IKE authentication. IKE is fixed to Pre-
Shared Key. 
Pre-Shared KeySets a shared key. Up to 255 alphanumeric 
characters, periods, and hyphens can be used.
Re-enter Pre-
Shared KeyEnters the shared key again to confirm it.
IKE SA LifetimeSets the lifetime for IKE SA from 5 to 28,800 
minutes.
IPsec SA 
LifetimeSets the lifetime for IPsec SA from 5 to 2,880 
minutes.
DH GroupSets the DH group.
PFSSelect the check box to enable the PFS setting.
Remote peers 
IPv4 addressSets the IP address to connect to.
Remote peers 
IPv6 addressSets the IP address to connect to.
Non IPsec 
communication 
policyAllows communication with a device which 
does not support IPsec.
 
						

							Dell Printer Configuration Web Tool203
IP Filter (IPv4)
Purpose:
To specify the IP address and subnet mask to be permitted or denied access to 
the printer.
Va l u e s :
Configure 
802.1xEnable IEEE 
802.1xSelect the check box to enable IEEE 802.1x 
authentication.
Authentication 
MethodEAP-MD5Selects the authentication method to 
use for IEEE 802.1x authentication.
EAP-MS-
CHAPv2
PEAP/MS-
CHAPv2
Login Name: 
(Device Name)Sets the login name (device name) for IEEE 802.1x 
authentication using up to 128 alphanumeric 
characters.
PasswordSets the login password for IEEE 802.1x 
authentication using up to 128 alphanumeric 
characters.
Re-enter 
PasswordConfirms the set login password.
Access List AddressSets the IP addresses that are permitted or denied 
access to the printer. Enter a numeric value between 0 
and 255 in each field.
Address MaskSets the subnet mask that are permitted or denied 
access to the printer. Enter a numeric value between 0 
and 255 in each field.
Active Mode RejectRejects printing from specified network 
address.
PermitPermits printing from specified network 
address.
DisabledDisables the IP Filter feature for the 
specified IP address.
 
						

							204Dell Printer Configuration Web Tool
Copy Printer Settings
The Copy Printer Settings menu includes the Copy Printer Settings and 
Copy Printer Settings Report pages.
Copy Printer Settings
Purpose:
To copy the printer settings to one or more of the same model of the printer.
To copy the settings to another printer, specify the IP address and password of 
the printer to which the settings are copied in the IP Address text box and 
Password text box. Then, click the Copy the settings to the Host in the above 
list button. Copying the settings is complete. The connection time-out period is 
60 seconds. After that, you can check whether the settings were copied to this 
page. And you need to check the Copy the settings to the Host in the above 
list and reboot the printer menu of the Dell Printer Configuration Web Tool 
in the destination printer to verify if the settings were actually copied or not.
If the settings can be copied but the printer configuration is different, the settings 
of only the same items are copied. Printer settings are simultaneously copied to 
printers of up to 10 IP addresses.
Copy Printer Settings Report
Purpose:
To verify whether the printer setting is copied to other printers successfully. 
 NOTE: The history is cleared by turning off the printer.
Print Volume
The Printer Volume menu includes the Print Volume and Dell ColorTrack 
pages.
Print Volume
Purpose:
To verify the number of printed pages. This page can also be displayed by 
clicking Print Volume in the left frame.
Va l u e s :
 
						

							Dell Printer Configuration Web Tool205
Dell ColorTrack
Purpose:
To specify which users have access to color printing and to limit print volume 
per user.
Va l u e s :
Edit Print User Registration - List
Purpose:
To edit the print meter setting for each user.
Va l u e s :
Printer Page CountDisplays the total number of pages printed since the printer was 
shipped from the factory.
Paper UsedDisplays the number of pages printed for each paper size.
ColorTrack 
ModeSets whether to enable the ColorTrack mode, which specifies who has 
access to color printing.
No Account 
User PrintSets whether to permit the printing of data without authentication 
information. To permit the printing for non-account user, set to On.
ColorTrack 
Error ReportSets whether to automatically print error-related information if 
printing with ColorTrack results in an error.
User 
Registration
*1Click Edit User Registration to edit print user registrations.
*1This item is available only when ColorTrack Mode is set to On.
User No. List to:Selecting each button displays a list of print meter settings for the 
group of user registration numbers indicated on the button. 
No.Displays the user registration number.
User NameDisplays the user name. (Not in Use) is displayed in User Name 
when there is no registration. 
 
						

							206Dell Printer Configuration Web Tool
Print User Settings (Confirm/Change, Create)
Purpose:
To view or edit the user entries on the Edit Print User Registration page, or 
create a new entry. The following items are in the dialog box that appears when 
you click the Confirm/Change or Create button on the Edit Print User 
Registration page.
Va l u e s :
MonoCount 
(Limit)Displays the total number of monochrome pages printed to date and 
the maximum number of monochrome pages the user is permitted to 
print.
ColorCount 
(Limit)Displays the total number of color pages printed to date and the 
maximum number of color pages the user is permitted to print.
Delete Deletes the entry for the selected user registration number. 
Confirm / 
ChangeDisplays a dialog box where you can edit the entry for the selected 
user registration number.
CreateDisplays a dialog box where you can create a new entry under the 
selected user registration number.
User Registration No.Displays the selected user registration number.
Delete User
*1Click this button to display the Print User Settings - Delete 
page to delete the user from registration. 
User NameAllows you to view or edit the name of the user registered 
under the selected user registration number, or enter a user 
name for the new entry.
PasswordDisplays the password associated with the user name in 
asterisks, or allows you to enter a password for the new entry. 
Re-enter PasswordConfirms the set password. 
Color Mode 
LimitationSets whether to permit only monochrome printing or both color 
and monochrome printing.
Upper Limit for Color 
PrintSets the maximum number of color pages the user is permitted 
to print.
Cumulative Color 
Page CountDisplays the total number of color pages printed to date.
 
						

							Dell Printer Configuration Web Tool207
Print User Settings (Delete)
Purpose:
To delete the user entries registered on the Edit Print User Registration page. 
The following items are in the dialog box that appears when you click the Delete 
button on the Edit Print User Registration page.
Va l u e s :
Tray Settings
Use the Tray Settings menu to set the paper size and type of paper loaded in the 
standard 250-sheet tray and the optional 250-sheet feeder.
Va l u e s :
Upper Limit for 
Monochrome PrintSets the maximum number of monochrome pages the user is 
permitted to print.
Cumulative 
Monochrome Page 
CountDisplays the total number of monochrome pages printed to 
date.
Apply New SettingsClick this button to apply the new settings.
Restore SettingsClick this button to restore the previous settings.
BackClick this button to return to the Edit Print User Registration 
- List page.
*1This item is available only when you click the Confirm / Change button.
User Registration No.Displays the selected user registration number.
User NameDisplays the name of the user registered under the user 
registration number.
Apply New SettingsClick this button to apply the new settings.
BackClick this button to return to the Edit Print User 
Registration page.
Tray 1 Paper 
SizeSets the size of paper loaded in the standard 250-sheet tray.
 
						

							208Dell Printer Configuration Web Tool
Tray 1 Paper 
Ty p eSets the type of paper loaded in the standard 250-sheet tray.
Tray 1 Custom 
Size - YSets the length of custom size paper loaded in the standard 250-sheet 
tray.
Tray 1 Custom 
Size - XSets the width of custom size paper loaded in the standard 250-sheet 
tray.
Tray 1 Display 
PopupSets whether to display a popup message that prompts the user to set 
the paper size and type when the paper is loaded in the standard 250-
sheet tray.
Tray 2 Paper 
Size
*1Sets the size of paper loaded in the optional 250-sheet feeder.
Tray 2 Paper 
Ty p e
*1Sets the type of paper loaded in the optional 250-sheet feeder.
Tray 2 Display 
Popup
*1Sets whether to display a popup message that prompts the user to set 
the paper size and type when the paper is loaded in the optional 250-
sheet feeder.
*1 This item is available only when the optional 250-sheet feeder is installed.