DELL 1355cnw User Manual

							Copying239
2Press the   (Copy) button.
3Press the   (Color Mode) button to select the desired color mode.
4Press the   (Start) button to begin copying.
Collated
To sort the copy output: For example, if you make two copies of three page 
documents, one complete three page document will print followed by the 
second complete document.
 NOTE: Copying documents with a large amount of data may exhaust available 
memory. 
If a memory shortage occurs, cancel the collating by turning 
Collated to 
Uncollated on the operator panel.
1Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the 
document cover.
For details about loading a document, see Loading an Original Document 
on the ADF on page 296.
2Press the   (Copy) button.
3Ensure that Collated is highlighted, and then press the   button.
4Press the   button to select the desired setting, and then press the   
button.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Uncollated*Does not sort the copy job
CollatedSorts the copy job
 
						

							240Copying
5If necessary, customize the copy settings including the number of copies, 
contrast, and image quality. See Setting Copy Options on page 238.
6Press the   (Start) button to begin copying.
Reduce/Enlarge
To reduce or enlarge the size of a copied image, from 25 percent to 400 
percent when you copy original documents from the document glass or ADF.
 NOTE: When you make a reduced copy, black lines may appear at the bottom of 
your copy.
 
NOTE: This item is available only when Multiple-Up is set to Off or 
Manual.
1Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the 
document cover.
For details about loading a document, see Loading an Original Document 
on the ADF on page 296.
2Press the   (Copy) button.
3Press the  button until Reduce/Enlarge is highlighted, and then 
press the   button.
4Press the   button to select the desired settings, and then press the   
button.
mm series
 NOTE: Values marked by an asterisk (*) are the factory default menu settings. AutoAutomatically determines which output mode for the copy job
200%
A5A4 (141%)
A5B5 (122%)
100%*
 
						

							Copying241
inch series
 NOTE: This item is available only when Multiple-Up is set to Off or 
Manual.
 
NOTE: You can also use the numeric keypad to input the desired zoom ratio from 
25% to 400%, or press the   button to enlarge the zoom ratio or press the   
button to reduce the zoom ratio in 1% intervals.
5Press the   (Start) button to begin copying.
Document Size
To specify the default document size:
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the 
document cover.
For details about loading a document, see Loading an Original Document 
on the ADF on page 296.
2Press the   (Copy) button.
3Press the   button until Document Size is highlighted, and then 
press the   button.
B5A5 (81%)
A4A5 (70%)
50%
200%
StmtLgl (154%)
StmtLtr (129%)
100%
*
LglLtr (78%)
LdgrLtr (64%)
50%
 
						

							242Copying
4Press the  button to select the desired settings, and then press the   
button.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
5Press the   (Start) button to begin copying.
Original Type
To select the copy image quality.
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the 
document cover.
For details about loading a document, see Loading an Original Document 
on the ADF on page 296.
2Press the   (Copy) button.
3Press the   button until Original Type is highlighted, and then 
press the   button.
4Press the   button to select the desired settings, and then press the   
button.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings. A4 (210 x 297 mm)
*1
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Letter (8.5 x 11)
*1
Folio (8.5 x 13)
Legal (8.5 x 14)
Executive (7.25 x 10.5)
*1The default for Document Size 
varies depending on country 
specific factory default.
 
						

							Copying243
5Press the   (Start) button to begin copying.
Lighter/Darker
To adjust the contrast to make the copy lighter or darker than the original. 
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the 
document cover.
For details about loading a document, see Loading an Original Document 
on the ADF on page 296.
2Press the   (Copy) button.
3Press the   button until Lighter/Darker is highlighted, and then 
press the   button.
4Press the   or  button to select the desired settings, and then press the 
 button.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
5Press the   (Start) button to begin copying.
Te x tSuitable for documents with text.
Text & Photo*Used for documents with both text and photos.
PhotoSuitable for documents with photos.
Lighter2Makes the copy lighter than the original. Works well with dark 
print.
Lighter1
Normal*Works well with standard typed or printed documents.
Darker1Makes the copy darker than the original. Works well with light 
print or faint pencil markings.
Darker2
 
						

							244Copying
Sharpness
To adjust the sharpness to make the copy sharper or softer than the original.
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the 
document cover.
For details about loading a document, see Loading an Original Document 
on the ADF on page 296.
2Press the   (Copy) button.
3Press the   button until Sharpness is highlighted, and then press the 
 button.
4Press the   button to select the desired settings, and then press the   
button.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
5Press the   (Start) button to begin copying.
Auto Exposure
To suppress the background of the original to enhance text on the copy.
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the 
document cover.
For details about loading a document, see Loading an Original Document 
on the ADF on page 296.
SharpestMakes the copy sharper than the original.
Sharper
Normal*Does not make the copy sharper or softer than the original.
SofterMakes the copy softer than the original.
Softest
 
						

							Copying245
2Press the   (Copy) button.
3Press the   button until Auto Exposure is highlighted, and then 
press the   button.
4Press the   button until On is highlighted, and then press the   
button.
5Press the   (Start) button to begin copying.
Multiple-Up
To print two original images to fit onto one sheet of paper.
 
						

							246Copying
1Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the 
document cover.
For details about loading a document, see Loading an Original Document 
on the ADF on page 296.
Auto:
Automatically 
reduces the 
pages to fit in one 
page.ID Copy:
Always prints two 
sides of the ID card 
in one page in the 
original size (by 
100%).Manual:
Reduces the pages in 
the custom size 
depending on the setting 
of the Reduce/Enlarge 
menu.
 
						

							Copying247
2Press the   (Copy) button.
3Press the   button until Multiple-Up is highlighted, and then press 
the  button.
4Press the   button to select the desired setting, and then press the   
button.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
5If necessary, customize the copy settings including the number of copies, 
contrast, and image quality. See Setting Copy Options on page 238.
6Press the   (Start) button to begin copying.
When you are using the document glass and 
Multiple-Up is set to 
Auto, ID Copy, or Manual, the display prompts you for another page. 
Press the   button to select 
Yes or No, and then press the   button.
7If you select Yes, press the   button to select Continue or Cancel, 
and then press the   button.
Margin Top/Bottom
To specify the top and bottom margins of the copy.
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the 
document cover.
For details about loading a document, see Loading an Original Document 
on the ADF on page 296.
Off*Does not perform multiple-up printing.
AutoAutomatically reduces the original pages to fit onto one 
sheet of paper.
ID CopyPrints the original pages onto one sheet of paper in the 
original size.
ManualPrints the original pages onto the one sheet of paper in 
the size specified in 
Reduce/Enlarge.
 
						

							248Copying
2Press the   (Copy) button.
3Press the   button until Margin Top/Bottom is highlighted, and 
then press the   button.
4Press the   or   button or enter the desired value using the numeric 
keypad, and then press the   button.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
5Press the   (Start) button to begin copying.
Margin Left/Right
To specify the left and right margins of the copy.
1
Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the 
document cover.
For details about loading a document, see Loading an Original Document 
on the ADF on page 296.
2Press the   (Copy) button.
3Press the   button until Margin Left/Right is highlighted, and 
then press the   button.
4Press the   or   button or enter the desired value using the numeric 
keypad, and then press the   button.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings. 4 mm*/0.2 
inch*Specify the value in increments of 1 mm/0.1 inch.
0-50 mm/0.0-
2.0 inch