D-Link Router DHP-1565 User Manual

46
D-Link DHP-1565 User Manual
Section 3 - Configuration
However,  if  the  automatic  detection  fails,  the  user  will  be  prompt  to 
either Try again or to click on the  Guide me through the IPv6 settings 
button to initiate the manual continual of the wizard.
There are several connection types to choose from. If you are unsure 
of your connection method, please contact your IPv6 Internet Service 
Provider.
Note: If using the PPPoE option, you will need to ensure that any PPPoE 
client software on...

47
D-Link DHP-1565 User Manual
Section 3 - Configuration
After  selecting  the  IPv6  over  PPPoE  option,  the  user  will  be  able  to 
configure the IPv6 Internet connection that requires a username and 
password to get online. Most DSL modems use this type of connection.
The following parameters will be available for configuration:
PPPoE Session:
Username:Password:
Verify Password: Service Name: Select the PPPoE Session value used here. This option 
will state that this connection shares it’s...

48
D-Link DHP-1565 User Manual
Section 3 - Configuration
This mode is used when your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your
IPv6 configuration settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS
Server. Your ISP provides you with all this information.
Use Link-Local Address:
IPv6 Address: Subnet Prefix Length:
Default 
Gateway:
Primary IPv6 
DNS Address:
Secondary...

49
D-Link DHP-1565 User Manual
Section 3 - Configuration
After selecting the Tunneling Connection (6rd) option, the user can configure the IPv6 6rd connection settings.
The following parameters will be available for configuration:
6rd IPv6 Prefix:
IPv4 Address:
Assigned IPv6 Prefix:
6rd Border Relay IPv4 Address:
IPv6 DNS Server: Enter the 6rd IPv6 address and prefix value used here.
Enter the IPv4 address used here.
Displays the IPv6 assigned prefix value here.
Enter the 6rd border relay IPv4 address...

50
D-Link DHP-1565 User Manual
Section 3 - Configuration
Displays  the  LAN  IPv6  Link-Local  address  of  the 
router.
LAN IPv6 Address 
Settings:
IPv6
Link-local Only
Select  Link-local  Only  from  the My  IPv6  Connection  is   drop-down 
menu  if  your  Router  will  use  the  IPv6  link  local  method  to  connect  to 
the Internet.
Click the Save Settings button to save any changes made.  

51
D-Link DHP-1565 User Manual
Section 3 - Configuration
There are several connection types to choose from: Auto Detection, Static IPv6, Autoconfiguration (SLAAC/DHCPv6), PPPoE, IPv6 in IPv4 Tunnel,
6to4, 6rd, and Link-local. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider.
Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled.
IPv6 Manual Setup
Auto Detection
Select  Auto...

52
D-Link DHP-1565 User Manual
Section 3 - Configuration
Static IPv6
Select Static IPv6 from the drop-down menu.
Enter the address settings supplied by your Internet provider (ISP). 
Enter the LAN (local) IPv6 address for the router. 
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select  Stateful (DHCPv6) , SLAAC + RDNSS  or SLAAC + Stateless DHCPv6 . 
Enter the start IPv6 Address for the DHCPv6 range for your local computers.
Enter the end IPv6 Address for...

53
D-Link DHP-1565 User Manual
Section 3 - Configuration
Autoconfiguration
Select Autoconfiguration (Stateless/DHCPv6) from the drop-down menu.
Select either  Obtain DNS server address automatically  or Use the following 
DNS Address.
Enter the primary and secondary DNS server addresses. 
Enter the LAN (local) IPv6 address for the router. 
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6....

54
D-Link DHP-1565 User Manual
Section 3 - Configuration
PPPoE
Select PPPoE from the drop-down menu.
Enter the PPPoE account settings supplied by your Internet provider (ISP). 
Select  Static if your ISP assigned you the IP address, subnet mask, gateway, 
and DNS server addresses. In most cases, select Dynamic.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password in the next box.
Enter the ISP Service Name (optional).
Select either...

55
D-Link DHP-1565 User Manual
Section 3 - Configuration
Autoconfiguration Type:
IPv6 Address Range Start: IPv6 Address Range End: IPv6 Address Lifetime: Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6.
Enter the start IPv6 Address for the DHCPv6 range for your local computers.
Enter the end IPv6 Address for the DHCPv6 range for your local computers.
Enter the IPv6 Address Lifetime (in minutes).