D-Link Router DHP-1565 User Manual

76
D-Link DHP-1565 User Manual
Section 3 - Configuration
Routing
The Routing option is an advanced method of customizing specific routes of data through your network.
Click the Save Settings button to save any changes made. Routing List:
Name:
Interface:
Destination IP: Netmask:
Gateway: Each Route has a checkbox next to it, check the box 
of the route you wish to enable. 
Specify a name for identification of this route.
Select the interface which the IP packet must use to 
transit out of the router when...

77
D-Link DHP-1565 User Manual
Section 3 - Configuration
Set the transmit power of the antennas.
B e a co n s   a re   p a c k e t s   s e n t   by   a n   Acce s s   Po i n t   to 
synchronize  a  wireless  network.  Specify  a  value.  100  is 
the default setting and is recommended. 
This value should remain at its default setting of 2346. 
If  inconsistent  data  flow  is  a  problem,  only  a  minor 
modification should be made.
(Delivery  Traffic  Indication  Message)  1  is  the  default 
setting....

78
D-Link DHP-1565 User Manual
Section 3 - Configuration
Wi-Fi Protected Setup (WPS)
Enable the Wi-Fi Protected Setup feature. 
A PIN is a unique number that can be used to add the 
router to an existing network or to create a new network. 
The  default  PIN  may  be  printed  on  the  bottom  of  the 
router. For extra security, a new PIN can be generated. 
You  can  restore  the  default  PIN  at  any  time.  Only  the 
Administrator  (“admin”  account)  can  change  or  reset 
the PIN. 
Shows the...

79
D-Link DHP-1565 User Manual
Section 3 - Configuration
Click  the Add Wireless  Device  with WPS  button  to  start Wireless  Connection  Setup Wizard. This  wizard  helps  you  add  wireless 
devices to the wireless network.
The wizard will either display the wireless network settings to guide you through manual configuration, prompt you to enter the 
PIN for the device, or ask you to press the configuration button on the device. If the device supports Wi-Fi Protected Setup and has a 
configuration...

80
D-Link DHP-1565 User Manual
Section 3 - Configuration UPnP
Internet Ping Block
Internet Port Speed
Multicast Streams
To use the Universal Plug and Play (UPnP™) feature click on 
Enabled.  UPNP  provides  compatibility  with  networking 
equipment, software and peripherals.
Unchecking  the  box  will  not  allow  the  DHP-1565  to 
respond  to  pings.  Blocking  the  Ping  may  provide  some 
extra  security  from  hackers.  Check  the  box  to  allow  the 
Internet port to be “pinged”.
You may set the...

81
D-Link DHP-1565 User Manual
Section 3 - Configuration
Guest Zone
Enable Guest Zone:
 New Schedule:
Wireless Network Name:
Enable Routing
Between Zones:
Security Mode:
The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones will be separate
from your main wireless network.
Check to enable the Guest Zone feature.
The  schedule  of  time  when  the  Guest  Zone  will 
be  active.  The  schedule  may  be  set  to  Always, 
which will...

82
D-Link DHP-1565 User Manual
Section 3 - Configuration
IPv6 Firewall
On this page the user can configure the IPv6 firewall settings. The firewall settings section is an advance feature that is used to allow or deny 
traffic from passing through the device. It works in the same way as IP Filters with additional settings. You can create more detailed rules for the 
device.
Name:
 Source Interface: Destination Interface:
Schedule:
IP Address Range: Protocol:
Port Range: Enter  a  custom  firewall  rule...

83
D-Link DHP-1565 User Manual
Section 3 - Configuration
IPv6 Routing 
This page allows you to specify custom routes that determine how data is moved around your network. 
Routing List:
Name:
Destination IP:
Metric:
Interface: Gateway: Each Route has a checkbox next to it, check the box 
of the route you wish to enable. 
Specify a name for identification of this route.
This field identifies the portion of the destination IP 
in use. 
The route metric is a value from 1 to 16 that indicates 
the  cost  of...

84
D-Link DHP-1565 User Manual
Section 3 - Configuration
Enter a new password for the Administrator Login Name. 
The administrator can make changes to the settings.
Enter  the  new  password  for  the  User  login.  If  you  login 
as  the  User,  you  can  only  see  the  settings,  but  cannot 
change them.
Enter a name for your DHP-1565 Router. 
Enables a challenge-response test to require users to type 
letters or numbers from a distorted image displayed on 
the  screen  to  prevent  online  hackers...

85
D-Link DHP-1565 User Manual
Section 3 - Configuration
Time
Select the Time Zone from the drop-down menu.
Check  this  box  if  the  country  your  are  located  in  uses 
Daylight Saving time. Enter a start date and an end date 
for daylight saving time.
Check this box to enable the NTP Server. 
NTP is short for Network Time Protocol. NTP synchronizes 
computer clock times in a network of computers. To enable 
NTP carry out the following: 
1.  Check  the  Automatically  synchronize  with  D-Link’s...