D-Link Router DHP-1565 User Manual

36
D-Link DHP-1565 User Manual
Section 3 - Configuration
Manual Internet Connection Setup
DS-Lite
My Internet 
Connection:
DS-Lite 
Configuration:
AFTR IPV6 Address:
B4 IPv6 
Address:
WAN IPv6  Address:
IPv6 WAN  Default 
Gateway: Select DS-Lite to activate this feature. 
Select  the  DS-Lite  DHCPv6  option  to  let  the  router 
allocate the AFTR IPv6 address automatically. Select the 
Manual Configuration to enter the AFTR IPv6 address in 
manually.
After selecting the Manual Configuration option...

37
D-Link DHP-1565 User Manual
Section 3 - Configuration
Wireless Settings
If  you  want  to  configure  the  wireless  settings  on  your  router  using  the 
wizard,  click  Wireless  Connection  Setup  Wizard  and  refer  to “Wireless 
Connection Setup Wizard” on page 102.
Click  Add Wireless Device with WPS if you want to add a wireless device 
using Wi-Fi Protected Setup (WPS) and refer to “Add Wireless Device with 
WPS Wizard” on page 105.
If you want to manually configure the wireless settings on...

38
D-Link DHP-1565 User Manual
Section 3 - Configuration
Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions.
Select  the  time  frame  that  you  would  like  your  wireless 
network enabled. The schedule may be set to Always. Any 
schedule  you  create  will  be  available  in  the  drop-down 
menu. Click New Schedule to create a new schedule.
The Service Set Identifier (SSID) is the name of your wireless 
network....

39
D-Link DHP-1565 User Manual
Section 3 - Configuration
Channel Width:
Wireless  Security  Mode:
Click the Save Settings button to save any changes made. Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting.
Refer to “Wireless Security” on page 137 for more information regarding wireless security.  

40
D-Link DHP-1565 User Manual
Section 3 - Configuration
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Network Settings
Use  this  section  to  configure  the  Router’s  local  network 
settings.
Use this section to configure the DHP-1565’s built-in DHCP 
server settings.
Use  this  section  to  create  a  new  DHCP  reservation  or 
manage existing DHCP reservations.
Displays information about the devices that have a DHCP 
reservation...

41
D-Link DHP-1565 User Manual
Section 3 - Configuration
Network Settings
Enter the IP address of the router. The default IP address 
is 192.168.0.1.
If  you  change  the  IP  address,  once  you  click  Apply,  you 
will need to enter the new IP address in your browser to 
get back into the configuration utility.
Enter  the  Subnet  Mask .  The  default  subnet  mask  is 
255.255.255.0.
Enter a Host Name to identify the DHP-1565.
Enter the Domain name (Optional).
Uncheck  the  box  to  transfer  the...

42
D-Link DHP-1565 User Manual
Section 3 - Configuration
DHCP stands for Dynamic Host Control Protocol. The DHP-1565 has a built-in DHCP server. The DHCP Server will automatically assign an IP address 
to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP 
Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DHP-1565. The 
DHCP Server will...

43
D-Link DHP-1565 User Manual
Section 3 - Configuration
If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP 
address only to that computer or device. 
Note: This IP address must be within the DHCP IP Address Range.
Check this box to enable the reservation.
Enter  the  computer  name.  Alter natively,  selec t  a 
computer that currently has a DHCP lease from the drop 
down menu and click  

44
D-Link DHP-1565 User Manual
Section 3 - Configuration
IPv6
On this page, the user can configure the IPv6 Connection type. There are two ways to set up the IPv6 Internet connection. You can use the Webbased 
IPv6 Internet Connection Setup Wizard, or you can manually configure the connection.
IPv6 Internet Connection Setup Wizard
For the beginner user that has not configured a router before, click
on the IPv6 Internet Connection Setup Wizard button and the router
will guide you through a few simple...

45
D-Link DHP-1565 User Manual
Section 3 - Configuration
Click the  IPv6 Internet Connection Setup Wizard  button and the router 
will guide you through a few simple steps to get your network up and 
running.
The  router  will  try  to  detect  whether  its  possible  to  obtain  the  IPv6 
Internet connection type automatically. If this succeeds then the user 
will be guided through the input of the appropriate parameters for the 
connection type found. Welcome to the D-Link IPv6 Internet Connection...