D-Link Router DHP-1565 User Manual

16
D-Link DHP-1565 User Manual
Section 1 - Product Overview
PowerLine Security
It is strongly recommended to encrypt your PowerLine network. By encrypting the data that is sent via your PowerLine adapters, you will prevent 
nearby hackers with a Powerline adapter to connect to your network and steal your information.
To encrypt your PowerLine network, follow the steps below:
PowerLine Network-Quick Setup
The  Common  Connect  Button  is  used  to  add  a  PowerLine  AV  device  to  a  PowerLine  network....

17
D-Link DHP-1565 User Manual
Section 1 - Product Overview
Note: A minimum of two PowerLine AV devices are required to create a network in order for your product to work properly.
Step 1
Plug  the  other  PowerLine  AV  devices  in  the  same  room  to  verify  if  your  home’s  electrical  wiring  is  suitable  for  the  PowerLine  Network.  Once 
configured you may place your PowerLine AV devices in the location of your choice. Plug one end of the Ethernet cable into the Ethernet port on 
the...

18
D-Link DHP-1565 User Manual
Section 2 - Installation
The DHP-1565 includes Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to guide you quickly through 
the installation process. 
Insert the  Setup Wizard CD  in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows® XP. The steps and screens are 
similar for the other Windows operating systems.
If  the  CD  Autorun  function  does  not  automatically  start  on  your  computer,  go  to  Start  > Run....

19
D-Link DHP-1565 User Manual
Section 3 - Configuration
Configuration (Router Mode)
This section will show you how to configure your new D-Link wireless router using the web-based configuration utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser such as Internet 
Explorer  and  enter  http://dlinkrouter  or  the  IP  address  of  the  router 
(192.168.0.1).
Select  Admin  in the User Name field. Leave the password blank by default. 
If  you  get  a  Page...

20
D-Link DHP-1565 User Manual
Section 3 - Configuration
Internet
Setup
This section allows you to configure your Router’s Internet settings.
The  Internet  Connection  Setup  Wizard  provides  a  quick 
method  for  configuring  your  Internet  settings.  To  start 
the Internet Connection Setup Wizard, click the  Internet 
Connection  Setup  Wizard   button.  Refer  to  “Internet 
Connection Setup Wizard” on page 21 for more information 
on how to use the Internet Connection Setup Wizard.
Click  the...

21
D-Link DHP-1565 User Manual
Section 3 - Configuration
Internet Connection Setup Wizard
Click the  Internet Connection Setup Wizard button to start the Internet 
Connection Setup Wizard.  

22
D-Link DHP-1565 User Manual
Section 3 - Configuration
Create a new password and then click Next to continue.
The  following  window  appears,  summarizing  the  steps  required  to 
complete the Internet Connection Setup Wizard:
Click Next to continue.
Select your time zone from the drop-down menu and then click  Next to 
continue.  

23
D-Link DHP-1565 User Manual
Section 3 - Configuration
Select  the  type  of  Internet  connection  you  use  and  then  click  Next  to 
continue.
If you selected  DHCP Connection (Dynamic IP Address) , you may need to 
enter the MAC address of the computer that was last connected directly 
to your modem. If you are currently using that computer, click  Clone Your 
PC’s MAC Address and then click Next to continue.
The Host Name is optional but may be required by some ISPs. The default 
host name is...

24
D-Link DHP-1565 User Manual
Section 3 - Configuration
If you selected PPPoE, enter your PPPoE username and password. 
If your ISP requires you to enter a PPPoE service name, enter the service 
name in the Service Name field.
Select  Static if your ISP assigned you the IP address, subnet mask, gateway, 
and DNS server addresses.
Click Next to continue.
Note:  Make  sure  to  remove  your  PPPoE  software  from  your  computer.  The 
software is no longer needed and will not work through a router.
If...

25
D-Link DHP-1565 User Manual
Section 3 - Configuration
If you selected L2TP, enter your L2TP username and password. 
Select  Static if your ISP assigned you the IP address, subnet mask, gateway, 
and L2TP server addresses.
Click Next to continue.
If you selected  Static, enter your network settings supplied by your Internet 
provider. 
Click Next to continue.