D-Link Router DHP-1565 User Manual
Here you can view all the pages of manual D-Link Router DHP-1565 User Manual. The D-Link manuals for Router are available online for free. You can easily download all the documents as PDF.
Page 121
116 D-Link DHP-1565 User Manual Section 3 - Configuration Network Name: Public Network Name: Private Network Name: Scan: Add Member: Device Name: Password: Member List: Link Rate:Status: You can set the name of your network and to make it either public or private. Make sure the Network Name of all of the devices within your PowerLine network is the same. Select this option if you would like to make your PowerLine network public with the default Network Name of “HomePlugAV”....
Page 122
117 D-Link DHP-1565 User Manual Section 3 - Configuration QoS Settings:Mac Address: network. If the field displays the word Disconnect, then the device has been added to the network but it is not ready. Please check its password and make sure the device is powered on. You can configure your PowerLine AV devices to give priority to the powerline network traffic accordingly. Enter the name, MAC Address, and priority level. You can find the MAC address printed on the back of...
Page 123
118 D-Link DHP-1565 User Manual Section 3 - Configuration Use MAC (Media Access Control) Filters to authorize wireless clients to access your network by their MAC addresses. When enabled, any client not on the MAC filter list will not be able to access your network. MAC Address Filter: MAC Address: Wireless Client List: Save Settings: Select Enable or Disable from the drop-down menu. Enter the MAC address you would like to filter. To find the MAC address on a computer, please refer to the Networking...
Page 124
119 D-Link DHP-1565 User Manual Section 3 - Configuration Advanced Wireless Transmit Power: WLAN Partition: WMM Enable: Short GI: Sets the transmit power of the antennas. Note: Transmit power is regulated by international standard. Users are forbidden to change its maximum limit. Select this checkbox to enable WLAN partition. If this feature is enabled, then there is no barrier between communication among wireless stations connecting to the Access Point. If this is...
Page 125
120 D-Link DHP-1565 User Manual Section 3 - Configuration Wi-Fi Protect Setup: Reset to Unconfigure: Current PIN: Generate New PIN: Reset PIN to Default: Enables the Wi-Fi Protected Setup feature. Restores the default Wi-Fi setup. Shows the current value of the access point’s PIN. Create a random number that is a valid PIN. This becomes the access point’s PIN. You can then copy this PIN to the user interface of the user. Restores the default PIN of the access point. Wi-Fi...
Page 126
121 D-Link DHP-1565 User Manual Section 3 - Configuration Add Wireless Device with WPS Adding a Wireless Device Using the PIN Method Please select one of the following configuration methods and click Next to continue. Click Add Wireless Device with WPS. If your wireless device supports WPS, select Auto and click Next to continue.
Page 127
122 D-Link DHP-1565 User Manual Section 3 - Configuration Adding a Wireless Device Using the PBC Method Select PBC to use Push Button Configuration in order to connect to your network. Click Connect to continue. Press the Common Connect Button on the wireless device that you are adding to your network to complete the setup.
Page 128
123 D-Link DHP-1565 User Manual Section 3 - Configuration Manually Add Wireless Device with WPS If you would like to add a wireless device with WPS manually, select Manual and click Next to continue. Enter the following settings in the wireless device you are adding to your wireless network. Click Ok to continue.
Page 129
124 D-Link DHP-1565 User Manual Section 3 - Configuration User Limit Settings In this section, you may set a limit to the number of wireless clients to prevent heavy wireless traffic.
Page 130
125 D-Link DHP-1565 User Manual Section 3 - Configuration Admin This page will allow you to change the Administrator password. The administrator password has read/write access. Enter a new password for the Admin User Name. The administrator account can change the configuration of the device. Enter the same password that you entered in the previous textbox in order to confirm its accuracy. Enter DHP-1565. Enables a challenge-response test which will require users to type...