D-Link Dsh8 Manual

 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  37 
Chapter 4 
Console Management  
Connecting to the Console Port 
The supplied cable which one end is RS- 232 connector and the other end is RJ-45 
connector. Attach the end of  RS-232 connector to PC or terminal and the other end of 
RJ-45 connector to the console  port of the switch. The connected terminal or PC must 
support the terminal emulation program. 
Figure 4-1: RS-232 to RJ-45 cable 
 
DB9/ RJ-45 Connector Pinouts 
 
 DB9-PIN RJ-45 Connector 
1...

Chapter 4: Console Management 
38  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
Login in the Console Interface  
To configure the system, connect a serial cable to a COM port on a PC or notebook 
computer and to RJ-45 type serial (console ) port of the Managed Industrial Switch. 
The console port of the Managed Industrial  Switch is DCE already, so that you can 
connect the console port directly throug h PC without the need of Null Modem. 
Figure 4-2: Connecting the Switch to a PC 
 
A terminal program...

 Chapter 4: Console Management 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  39 
Figure 4-3: The COM1 properties window 
 
2.  Once the terminal has connected to th e device, power on the GE-DSH series 
Managed Industrial Switch, the terminal  will display that it is running testing 
procedures.  
3.  Then, the following message asks th e login password. The factory default 
password as following and the login  screen in below figure appears. 
User name: admin 
Password:  admin 
Figure 4-4: The login...

Chapter 4: Console Management 
40  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
NOTE: For security reasons, please change  and memorize the new password after 
this first setup.  
Only enter commands in lowercase lette rs when in the console interface. 
 
CLI Management 
The system supports the console management -CLI command. After you log in on to 
the system, you will see a command prompt . To enter CLI management interface, 
type in enable command. 
Figure 4-5: The CLI command interface 
  

 Chapter 4: Console Management 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  41 
CLI commands and descriptions 
 
Modes Access Method Prompt Exit Method About This Model 
User EXEC Begin a session 
with your switch.  switch> Enter logout or 
quit.  The user commands 
available at the user level 
are a subset of those 
available at the privileged 
level. 
Use this mode to: 
• Perform basic tests. 
• Display system 
information. 
Privileged 
EXEC 
Enter the enable 
command while in 
User EXEC mode....

Chapter 4: Console Management 
42  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  

 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  43 
Chapter 5 
Web-Based Management  
About Web-based Management 
The Managed Industrial Switch offers ma nagement features that allow users to 
manage the Managed Industrial Switch fr om anywhere on the network through a 
standard browser such as Mi crosoft Internet Explorer. 
The Web-Based Management supports Internet  Explorer 6.0. It is based on Java 
Applets with an aim to reduce networ k bandwidth consumption, enhance access 
speed and present an easy...

Chapter 5: Web-Based Management 
44  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
 
 
 
 
 
 
 
 
Requirements 
• Workstations of subscribers running  Windows 98/ME, NT4.0, 2000/2003/XP, MAC 
OS9 or later, Linux, UNIX or other platform  compatible with TCP/IP protocols.    
•  Workstation installed with Et hernet NIC (Network Card) 
•  Ethernet Port connect 
o Network cables - Use standard network  (UTP) cables with RJ45 connectors. 
o  Above PC installed with WEB Browser  and JAVA runtime environment...

 Chapter 5: Web-Based Management 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  45 
Figure 5-1:  Login screen 
 
 
3. After entering the username and passwor d, the main screen appears as shown in 
Figure 5-2. 
Figure 5-2:  Default main page 
 
4. The Switch Menu on the left of the Web page let you access all the commands and 
statistics the Switch provides.  
Now, you can use the Web management  interface to continue the switch 
management or manage the Managed Indu strial Switch by Web interface. The...

Chapter 5: Web-Based Management 
46  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
NOTE:  
1. We recommend using Internet Explorer 6.0 or above to access GE-DSH-82 series 
Managed Industrial Switch. 
2. The changed IP address take effect immedi ately after clicking on the Save button. 
You need to use the new IP addres s to access the Web interface. 
3. For security reasons, please change  and memorize the new password after this 
first setup. 
4. Only enter commands in lowercase le tters when using the...