D-Link Dsh8 Manual

 Chapter 1: Introduction 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  7 
Share Data Buffer  1Mbit 
Maximum Frame Size 1522 Bytes packet 
Flow Control  Back pressure for Half-Duplex 
IEEE 802.3x Pause Frame for Full-Duplex  
LED 
Per unit:  
Power (Green), Ring 
Master (Green), Power 
1 (Green), Power 2 
(Green), Fault (Red)  
8 port 10/100:  
Link/Activity (Green), 
Full duplex/Collision 
(Yellow) 
2 SFP port:  
LNK/ACT(Green) 
2 1000T:  
LNK/ACT(Green), 
1000M(Green) Per unit:  
Power (Green), Ring...

Chapter 1: Introduction 
8 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
Layer 2 function  
Management Interface Console, Telnet, Web Browser, SNMP v1, v2c and v3 
Port Configuration 
Port disable/enable.  
Auto-negotiation 10/100Mbps full and half duplex mode selection.  
Flow Control disable / enable.  
Bandwidth control on each port. 
Port Status Display each port’s speed duplex mode, link status, Flow control status. 
Auto negotiation status 
VLAN  Port-Based VLAN, up to  9 VLAN groups  
IEEE 802.1q...

 Chapter 1: Introduction 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  9 
SNMP MIBs 
RFC-1213 MIB-II 
RFC-2863 Interface MIB 
RFC-1493 Bridge MIB 
RFC-2819 RMON MIB (Group 1, 2, 3, 9) 
RFC-2674 Extended Bridge MIB (Q-Bridge) 
Private MIB 
Standards Conformance  
Regulation Compliance  FCC Part 15 Class A, CE  
Standards Compliance  
IEEE 802.3 10Base-T 
IEEE 802.3u 100Base-TX/100Base-FX 
IEEE 802.3z Gigabit SX/LX 
IEEE 802.3ab Gigabit 1000T 
IEEE 802.3x Flow Control and Back pressure 
IEEE 802.1d...

Chapter 1: Introduction 
10  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  

 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  11 
Chapter 2 
Installation  
Hardware Description 
Physical Dimensions 
GE-DSH-82  
(W x D x H): 2.83” x 4.13” x 5.98” / 72mm x 105mm x 152mm. 
Figure 2-1 :  GE-DSH-82 panel layout 
  

Chapter 2: Installation 
12  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
GE-DSH-82-PoE 
(W x D x H): 2.83” x 4.13” x 5.98” / 72mm x 105mm x 152mm 
Figure 2-2 :  GE-DSH-82-PoE panel layout 
 
GE-DSH-73 
(W x D x H): 2.83” x 4.13” x 5.98” / 72mm x 105mm x 152mm 
Figure 2-3 :  GE-DSH-73 panel layout 
  

 Chapter 2: Installation 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  13 
Front / Rear Panel 
The Front Panel and Rear Panel of the GE -DSH-82 Managed Industrial Switch are 
shown below: 
Figure 2-4 :  Front and Rear Panel of GE-DSH-82 
 
 
1. Model Name  9. 10/100/1000Base-T port 
2. System Power: LED  10.  1000Base-SX/LX SFP slot 
3. Ring Master: LED indicator  11.  LED indicators for 1000Base-SX/LX ort 
4. LED for power 1 input  12. 6-Pin Terminal Block 
5. LED for power 2 input  13. Ground Screw...

Chapter 2: Installation 
14  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
The Front Panel and Rear Panel of the GE-DSH-82-PoE Managed Industrial Switch are 
shown below: 
Figure 2-5 :  Front and Rear Panel of GE-DSH-82-PoE 
 
 
1. Model Name  9. 10/100/1000Base-T port 
2. System Power: LED  10.  1000Base-SX/LX SFP slot 
3. Ring Master: LED indicator  11.  LED indicators for 1000Base-SX/LX ort 
4. LED for power 1 input  12. LED indicators for PoE power output 
5. LED for power 2 input  13. 6-Pin Terminal...

 Chapter 2: Installation 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  15 
The Front Panel and Rear Panel of the GE -DSH-73 Managed Industrial Switch are 
shown below: 
Figure 2-6 :  Front and Rear Panel of GE-DSH-73 
 
 
1. Model Name  9. 1000Base-SX/LX SFP slot (Port-7) 
2. System Power: LED  10. 1000Base-SX /LX SFP slots (Port-9 / Port-10) 
3. Ring Master: LED indicator  11. 10/100/1000Base-T ports (Port-9 / Port-10) 
4. LED for power 1 input  12. 6-Pin Terminal Block 
5. LED for power 2 input  13....

Chapter 2: Installation 
16  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
Top View 
The top panel of the GE-DSH-82 Managed Industrial Switch has one terminal block 
connector of two DC power inputs and one fault alarm. 
Figure 2-7:  Top Panel of GE-DSH-82 
 
Figure 2-8 :  Top Panel of GE-DSH-82-PoE