D-Link Dsh8 Manual

 Chapter 5: Web-Based Management 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  47 
System Information  
The System Info page provides information  for the current device information. The 
System Information page helps a switch adm inistrator to identify the hardware MAC 
address, software version and system uptime. The screen in Figure 5-3 ap\
pears. 
Figure 5-3:  Switch settings interface 
 
This page includes the following fields: 
 
Object Description 
System Name:  Assign the system name of the...

Chapter 5: Web-Based Management 
48  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
IP Configuration 
The IP Configuration includes the IP Address, Subnet Mask and Gateway. The 
Configured column is used to view or ch ange the IP configuration. Fill up the IP 
Address, Subnet Mask and Gateway for the device. The screen in  Figure 5-4 appears. 
Figure 5-4:  IP configuration interface 
 
This page includes the following fields: 
 
Object Description 
DHCP Client:  Enable or disable the DHCP client func...

 Chapter 5: Web-Based Management 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  49 
 
DHCP Server 
DHCP is the abbreviation of Dynamic Host Co nfiguration Protocol that is a protocol 
for assigning dynamic IP addresses to  devices on a network. With dynamic 
addressing, a device can have a different IP  address every time it connects to the 
network. In some systems, the devices IP  address can even change while it is still 
connected. DHCP also supports a mix of st atic and dynamic IP addresses. Dynamic...

Chapter 5: Web-Based Management 
50  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
This page includes the following fields: 
 
Object Description 
DHCP Server: Enable or Disable the DHCP Server function. Enable—the switch will be 
the DHCP server on your local network. 
Low IP Address: Type in an IP address. Low IP address is the beginning of the dynamic 
IP range. For example, dynamic IP is in the range between 
192.168.0.101 ~ 192.168.0.200. In contrast, 
192.168.0.101 is the Low IP 
address. 
High IP...

 Chapter 5: Web-Based Management 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  51 
This page includes the following fields: 
 
Object Description 
IP Addr  Specifies the Clients IP Address. 
Client ID Specifies the Clients Hardware Address. 
Type Specifies the Type of Binding: Dynamic / Manual. 
Lease  Specifies the Lease time left in seconds. 
 
Port and IP Bindings 
Assign the dynamic IP address bound with th e port to the connected client. The user 
is allowed to fill each port column with on e...

Chapter 5: Web-Based Management 
52  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
TFTP 
It provides the functions allowing the user to update the switch firmware via the 
Trivial File Transfer Protocol (TFTP) server.  Before updating, make sure the TFTP server 
is ready and the firmware image is located on the TFTP server. 
Update Firmware 
Use this menu to download a file from  specified TFTP server to the Managed 
Industrial Switch. 
Figure 5-8:  Update Firmware interface 
 
This page includes the...

 Chapter 5: Web-Based Management 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  53 
Figure 5-9:  Restore Configuration interface 
 
This page includes the following fields: 
 
Object Description 
TFTP Server IP Address:  Type in the TFTP server IP. 
Restore File Name: Type in the correct file name for restoring. 
 
Backup Configuration 
You can back up the current configuration fr om flash ROM to the TFTP server for the 
purpose of recovering the configuration late r. It helps you to avoid wasting time...

Chapter 5: Web-Based Management 
54  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
This page includes the following fields: 
 
Object Description 
TFTP Server IP Address: Type in the TFTP server IP. 
Backup File Name: Type in the file name. 
 
System Event Log 
This page allows the user to decide whethe r to send the system event log, and select 
the mode which the system event log will be se nt to client only, server only, or both 
client and server. What kind of event log will  be issued to the...

 Chapter 5: Web-Based Management 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  55 
Figure 5-11:  Syslog Configuration interface 
 
 
This page includes the following fields: 
 
Object Description 
Syslog Client Mode:  Select the system log mode—Client Only, Server Only, or Both.  
Client Only: the system event log will only be sent to this interface of 
the switch  
Server Only: the system log will only be sent to the remote system 
log server with its IP assigned.  
Both: the system event log will be...

Chapter 5: Web-Based Management 
56  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
System Event Log-SMTP Configuration 
Simple Mail Transfer Protocol (SMTP) is the standard for email transmissions across 
the network. You can configure the SMTP se rver IP, mail subject, sender, mail account, 
password, and the recipient email addresses, which the e-mail alert will send to. 
There are also five types of event-Devi ce Cold Start, Device Warm Start, 
Authentication Failure, X-Ring Topology  Change, and Port...