D-Link Dsh8 Manual

							
 Chapter 1: Introduction 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  7 
Share Data Buffer  1Mbit 
Maximum Frame Size 1522 Bytes packet 
Flow Control  Back pressure for Half-Duplex 
IEEE 802.3x Pause Frame for Full-Duplex  
LED 
Per unit:  
Power (Green), Ring 
Master (Green), Power 
1 (Green), Power 2 
(Green), Fault (Red)  
8 port 10/100:  
Link/Activity (Green), 
Full duplex/Collision 
(Yellow) 
2 SFP port:  
LNK/ACT(Green) 
2 1000T:  
LNK/ACT(Green), 
1000M(Green) Per unit:  
Power (Green), Ring 
Master (Green), Power 1 
(Green), Power 2 (Green), 
Fault (Red)  
8 port 10/100:  
Link/Activity (Green), Full 
duplex/Collision (Yellow) 
2 SFP port:  
LNK/ACT(Green),  
2 1000T:  
LNK/ACT(Green), 
1000M(Green) 
PoE: 
PoE In-use (Green)  Per unit:  
Power (Green), Ring 
Master (Green), Power 
1 (Green), Power 2 
(Green), Fault (Red)  
7 port 10/100:  
Link/Activity (Green), 
Full duplex/Collision 
(Yellow) 
3 SFP port:  
LNK/ACT(Green) 
3 1000T:  
LNK/ACT(Green), 
1000M(Green) 
DI/DO --- 
2 Digital Input (DI):  
Level 0: -30~2V 
Level 1: 10~30V 
Max. input current: 8mA 
2 Digital Output(DO):  
Open collector to 40VDC, 
200mA  --- 
ESD Protection 4KV DC  6KV DC  6KV DC 
EFT Protection 3KV DC  3KV DC  3KV DC 
Console Interface One RJ-45-to –RS-232 male conne
ctor for switch management 
Power Over Ethernet 
PoE Standard ---  IEEE 802.3af PSE (Power 
Sourcing Equipment)  --- 
Units can be Powered --- 8  --- 
PoE Power Output --- 48V DC, Max. 15.4 watts, 
350mA  --- 
Power Pin Assignment --- 1/2(+), 3/6(-) ---  
						

							
Chapter 1: Introduction 
8 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
Layer 2 function  
Management Interface Console, Telnet, Web Browser, SNMP v1, v2c and v3 
Port Configuration 
Port disable/enable.  
Auto-negotiation 10/100Mbps full and half duplex mode selection.  
Flow Control disable / enable.  
Bandwidth control on each port. 
Port Status Display each port’s speed duplex mode, link status, Flow control status. 
Auto negotiation status 
VLAN  Port-Based VLAN, up to  9 VLAN groups  
IEEE 802.1q Tagged Based VLAN , 4K VL AN ID, up to 256 VLAN groups  
Spanning Tree IEEE 802.1d Spanning Tree 
IEEE 802.1w Rapid Spanning Tree 
Link Aggregation 
Static Port Trunk 
IEEE 802.3ad LACP (Link Aggregation Control Protocol) 
Supports 4groups of 4-Port trunk 
QoS 
Traffic classification based on : 
Port Number,  
802.1Q Tag,  
802.1p priority, 
IP DSCP/TOS field in IP Packet 
IGMP Snooping v1 and v2 
256 multicast groups and IGMP query 
Bandwidth Control 
Per port bandwidth control 
Ingress: 500Kb~80Mbps 
Egress: 64Kb~80Mbps 
Port Mirror RX / TX / Both 
Security 
Support 100 entries of MAC address fo r static MAC and another 100 for 
MAC filter 
Support 10 IP addresses that have permission to access the switch 
management and to prevent unauthorized intruder  
						

							
 Chapter 1: Introduction 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  9 
SNMP MIBs 
RFC-1213 MIB-II 
RFC-2863 Interface MIB 
RFC-1493 Bridge MIB 
RFC-2819 RMON MIB (Group 1, 2, 3, 9) 
RFC-2674 Extended Bridge MIB (Q-Bridge) 
Private MIB 
Standards Conformance  
Regulation Compliance  FCC Part 15 Class A, CE  
Standards Compliance  
IEEE 802.3 10Base-T 
IEEE 802.3u 100Base-TX/100Base-FX 
IEEE 802.3z Gigabit SX/LX 
IEEE 802.3ab Gigabit 1000T 
IEEE 802.3x Flow Control and Back pressure 
IEEE 802.1d Spanning  tree protocol 
IEEE 802.1w Rapid spa nning tree protocol 
IEEE 802.1p Class of service 
IEEE 802.1Q VLAN Tagging 
IEEE 802.1x Port Authentica tion Network Control 
IEEE 802.3af Power over Ethernet (GE-DSH-82-PoE) 
RFC 768 UDP 
RFC 793 TFTP 
RFC 791 IP 
RFC 792 ICMP 
RFC 2068 HTTP 
RFC 1112 IGMP version 1 
RFC 2236 IGMP version 2 
  
						

							
Chapter 1: Introduction 
10  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  
						

							
 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  11 
Chapter 2 
Installation  
Hardware Description 
Physical Dimensions 
GE-DSH-82  
(W x D x H): 2.83” x 4.13” x 5.98” / 72mm x 105mm x 152mm. 
Figure 2-1 :  GE-DSH-82 panel layout 
  
						

							
Chapter 2: Installation 
12  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
GE-DSH-82-PoE 
(W x D x H): 2.83” x 4.13” x 5.98” / 72mm x 105mm x 152mm 
Figure 2-2 :  GE-DSH-82-PoE panel layout 
 
GE-DSH-73 
(W x D x H): 2.83” x 4.13” x 5.98” / 72mm x 105mm x 152mm 
Figure 2-3 :  GE-DSH-73 panel layout 
  
						

							
 Chapter 2: Installation 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  13 
Front / Rear Panel 
The Front Panel and Rear Panel of the GE -DSH-82 Managed Industrial Switch are 
shown below: 
Figure 2-4 :  Front and Rear Panel of GE-DSH-82 
 
 
1. Model Name  9. 10/100/1000Base-T port 
2. System Power: LED  10.  1000Base-SX/LX SFP slot 
3. Ring Master: LED indicator  11.  LED indicators for 1000Base-SX/LX ort 
4. LED for power 1 input  12. 6-Pin Terminal Block 
5. LED for power 2 input  13. Ground Screw 
6. FAULT: LED indicator  14. Screw holes for Wall Mounting kit 
7. RJ-45 type RS-232 Console 15. DI N-Rail Kit 
8. 8 x 10/100Base-TX port   
  
						

							
Chapter 2: Installation 
14  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
The Front Panel and Rear Panel of the GE-DSH-82-PoE Managed Industrial Switch are 
shown below: 
Figure 2-5 :  Front and Rear Panel of GE-DSH-82-PoE 
 
 
1. Model Name  9. 10/100/1000Base-T port 
2. System Power: LED  10.  1000Base-SX/LX SFP slot 
3. Ring Master: LED indicator  11.  LED indicators for 1000Base-SX/LX ort 
4. LED for power 1 input  12. LED indicators for PoE power output 
5. LED for power 2 input  13. 6-Pin Terminal Block 
6. FAULT: LED indicator  14. Ground Screw 
7. RJ-45 type RS-232 Console  15. Screw holes for Wall Mounting kit 
8. 8 x 10/100Base-TX port  16. DIN-Rail Kit 
  
						

							
 Chapter 2: Installation 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  15 
The Front Panel and Rear Panel of the GE -DSH-73 Managed Industrial Switch are 
shown below: 
Figure 2-6 :  Front and Rear Panel of GE-DSH-73 
 
 
1. Model Name  9. 1000Base-SX/LX SFP slot (Port-7) 
2. System Power: LED  10. 1000Base-SX /LX SFP slots (Port-9 / Port-10) 
3. Ring Master: LED indicator  11. 10/100/1000Base-T ports (Port-9 / Port-10) 
4. LED for power 1 input  12. 6-Pin Terminal Block 
5. LED for power 2 input  13. Ground Screw 
6. FAULT: LED indicator  14. Screw holes for Wall Mounting kit 
7. RJ-45 type RS-232 Console 15. DI N-Rail Kit 
8. 8 x 10/100Base-TX port   
  
						

							
Chapter 2: Installation 
16  GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
Top View 
The top panel of the GE-DSH-82 Managed Industrial Switch has one terminal block 
connector of two DC power inputs and one fault alarm. 
Figure 2-7:  Top Panel of GE-DSH-82 
 
Figure 2-8 :  Top Panel of GE-DSH-82-PoE