Comdial Unisyn System Manual

IMI66-112Description Of System FeaturesM
Manual Hold
A button activated feature at each station will place an outside line on hold. Pressing the HOLD button holds the
call, provides a distinctive flash rate of the line button indicator, and allows the user to access other station features.
‘Ihe holding station or any other station that has access to the line can retrieve the held call. No class of service
programming is required.
Memory Retention Without Batteries
An electronic device sometimes referred...

Description Of System FeaturesIMIG-112N
Night Ringing-3.7.18-
Night transfer is an attendant-controlled feature that transfers the day ringing program of all incoming calls to a
particular station or stations for off-hour or special purpose answering.The night transfer mode can only be
activated from station 10 or 12. Select the individual lines at each station 
that are to have ringing transferred with
this feature with station class of service programming.0
On-Hook Dialingx‘2
Every multiline station...

IMI66-112Description Of System Features
Prime Line Automatic-3.7.27-
If you program a station for prime line automatic, the system automatically selects the designated outside line,
intercom line, or line group when the user takes the handset off hook.
Users may pre-empt prime line pickup by
selecting another line before lifting the handset. If the prime line is ringing, it is automatically answered when the
user lifts the handset.
Privacy Release-Designated Programmable Button-3.8.10-
You can program...

Description Of System FeaturesIMI66-112
SSaved Number 
Rediul
This feature enables a button action to save the first 16 digits of the last number manually dialed from the keypad.
The user can 
redial the saved number at a later time.The saved number is permanently available for later use until
the user replaces it with a new number. No class of service programming is required.
Self Diagnostics-2.9-
Each station can execute a self test when so enabled. This test verifies processor, indicator, and tone...

IMI64-112Description Of System FeaturesSystem Speed 
Dial-3.5.8-
The system provides up to ninety-nine system-wide speed dial numbers. The system speed dial numbers can be up
to 16 digits in length and can include numbers, 
#‘s, %‘s, pauses, and flash signals. Program system speed dial
numbers at station 10 or 12 for use at every station in the system. No class of service is required.T
Tap (Flash) /Recall
: :.-:.
When host system custom-calling features are available via a hookflash signal, you can...

Description Of System FeaturesIkfIG-112Toll Restriction (Night Mode)-3.10.6
You can assign toll restriction tables that will only take effect when the system is in the night transfer of ringing
mode. You can assign these night mode tables to any or all stations in the system .These toll tables work in
addition to any tables that may already be assigned to the station. For example: You can program a station-that has
no other toll restriction table assigned to receive a toll restriction table that will...

Index
- cl
6Index
A
Abandoned Hold Release,AC Power, Connecting
Access Denied (Line Access Denied)
All Call and Zone Paging
All Call and Zone Paging Button
Assign Entries To Toll Tables
Assign Toll Tables To Lines
Assign Toll Tables To Stations
Assign Toll Tables To Stations For
Night Ringing
Assign Toll Tables To Stations
For Speed Dials
Attendant, Dedicated ITCM for
Attendant 
/ Line Access
Automatic Call-back Button
Automatic Hold
Automatic Hold for Intercom
Automatic Privacy, Lines
Automatic Privacy...

Index
Connecting A Six Line, Sixteen Station
Common Equipment Cabinet2.6.5
Connecting The Stations2.6
Connecting A Power Failure Station2.7.2
Connecting A Common Audible and
Auxiliary Station Interface2.7.3
Connecting An External Paging 
Intet-face-
Station PA Port2.7.4
Connecting An External Paging 
Interface-
Line PA Port2.7.5
Connecting A Data Device2.7.6
Connecting A Music Interface2.7.7
D
,Data Device, Connecting A
Data Security Port
Data Baud Rate
DC Voltages to The Station Ports,
Checking The...

IA41664 12
IndexJ
P
Jacks, Connecting The LineK2.5.1Key /Hybrid System, Understanding A
2.7.1
Knowing The General Specifications1.5
L
Languages
3.7.24
Lines, Connecting The
2.5
Line Access I Attendant3.5.1
Line Access Denied (Access Denied)
3.7.2
Line Button3.8.6
Line Disable, Line Port Functions3.6.6
Line Groups3.6.5
Line Group Button
3.8.7
Line Group Queue Button3.8.8Line Port Functions-Auxiliary Lines
3.6.7
Line Port Functions-Central Office Lines
3.6,8Line Port Functions-Line Disable
3.6.6
Lines,...

IndexZM166-112
Stations, Connecting The
Stations, Programming The
System, Checking The
System Clock
System, Defaulting The
System, Grounding The
System, Master Clearing The
System Options, Installing
System Programming, Understanding
System, Programming The
System Speed Dial
System Status Indicator, Checking TheT
Technical Assistance, Seeking
Telephone To Program, Using A
Time, Setting The
Timed Hold Recall, Timing Feature
Timing Feature-DTMF Extended TonesTiming Feature-PA Port
Timing Feature-Pause...