Comdial Keyvoice Installation Supervisor Guide

cil LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
5.Repeat steps 2 through 5 to set up Routing box 821. In step 2, type 821 (instead of 800)to access box 82 
I. In the DESTINATION FOR DIGITS field, we recommend you make the
same entries as you did on the setup screen for box 800.
6.Repeat steps 2 through 5 to set up Routing box 80 1. In step 2, type 801 (instead of 800)
to access box 80 1. In the DESTINATION FOR DIGITS field, you may decide to modify or
simply not include the single-digit...

@ LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
5.Repeat steps 3 through 5 for each subscriber mailbox you want to create.
6.Once you create all necessary mailboxes, continue with the next procedure, below.
2.5.6.7 Customizing Subscriber Mailboxes
Using information the system supervisor provides on the Mailbox Setup Worksheets, you can
rnow customize the mailboxes you created for each subscriber on the system.
The procedure below identifies the fields you should be sure to customize for each...

a LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1MAILBOX
Page 1IIIOX 
number:- FIRST NAME:- Last:,,Ill
CclLL TRANSFER INFORMfiTION
Transfer tune:
To: pRings to answer:iUse 3-way calling? iGet callers name?
Record conversation? 

Currently enabled?Transfer schedule: ,PERSONAL 
DflTCIPassword:
Name recorded:
Greeting recorded:
PRIVILEGES
Class of seruice:
Restricted - Client of:
Sequence to turn ON message-waiting lamp:-New: g
Sequence to turn OFF message-waiting lamp:-Old: d
=Help FZ=Add...

a LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
HAILBOX
IPage 2)
lox number : mFirst Name :m Last::
PAGER NUMBER:Times to call:HHins between calls:
flfter playing greeting:
If cal ler chooses “other opt ions” :
After leauing message,
,,,mIf call is uia D.I.D. play greeting in language: 
[Auto-forward NEW msgs to box 
m after m hours.Schedule :m
IESSAGE DELIVERY -Where and WhenRepeatInterua 1Schedule
Cal
Cal
Cal
Cal
Cal
Run-=
4.Press  to move the cursor to the PAGER NUMBER field. If the...

8 LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
._,.:.-.i‘;
The pager number you enter can contain the digits 0 through 9, star (*), pound (#), and
the following special characters:
call progress tones during the course of the call. When
hed dialing, the system immediately assumes 
thatthe
pager systemhas answered.
Specifies a line group is to be used (for example, 
{A}555-1212
indicates “choose any line in line group A, and dial the number
Can be used for punctuation and is ignored....

#I LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
NUMBER OF TIMES TO CALL
The Lite system calls the pager the number of times you specify in this field. Repetitive
paging may be useful if the pager is turned off periodically or is out of pager range.
Note:This field is used to tell the Lite system how many successful calls it shouldmake to the paging service. Do not confuse this with the pager-retry feature. If
the Lite system calls the pager number and does not hear it ring and answer,
then it...

@ LITE SYS-~EM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1,,
 . . . . ::I..:ENABLED
Set this field to Yes to indicate that the pager feature for this mailbox is currently on. Set
the field to No to indicate that the pager feature is off. The mailbox owner can also
toggle this field on and off by calling into the system.If this field is set to No, it
overrides the call schedule set in the previous field.
5.Press  to move the cursor to the first MESSAGE DELIVERY field. If the subscriber
is to use the...

8 LITE SYSTEM~NSTALIATIONAND SUPERVISOR GUIDE~.~ VER. 1
received aDTMFdigit (1for Yes,anything else for No),by the end of the
announcement cycle(s), it assumes that it is talking to an answering
machine, and proceeds to play each new message in turn.V
Voice pager. This must be the last character in the telephone number.
Details of voice pager programming are found later in this section.
IInternal (must be the first character). Overrides the INTERNAL parameter (in
the configuration file 
VM.CFG) and...

#I LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
T....: :..,,: .&’._
.::
SCHEDULESelect when the Lite system should call this number. The options are:
The number is called any time a new message is left in the
mailbox.DAY SERVICE
The number is called only during day/lunch service, as
defined in the System Information 
/ Business Hours screen.
NIGHT SERVICEThe number is called only during non-day/lunch service, as
defined in the System Information I Business Hours screen.SCHEDULE A, B, C, or D...