Comdial Keyvoice Installation Supervisor Guide

8 LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
2. A screen displays, prompting you to indicate the type of connection you are establishing.
To indicate you are using a 
null modem cable connection, typeN then press .
3.The screen refreshes with a display that emulates the Lite system unit. The keyboard and:monitor of the laptop now effectively control the Lite 
systein unit..,‘_
Note:If the screen displays a message indicating the program is shutting down
communications, you may need to...

ti LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
2.5.3 Completing the First Time Setup Procedure
Once you connect the Lite system to the phone system and access the Lite system using a
laptop computer, you are ready to begin customizing the system. Customizing the system
involves:
lRunning the PBX Setup utility
0 Specifying System Information
lSpecifying Routing Box and Mailbox Information
2.5.4 Running the PBX Setup Utility
The Lite system voice processing software is pre-installed 
on the...

i‘, LITESYSTEMINSTALLATIONANDSUPERVISORGUIDE~.~ VER. 1
6.The system warns that it may over-write some changes to the Lite system database. To
continue, press 
.
7.At the system prompt for the number of digits in the extension numbers, enter the
appropriate number, then press . At 
the.system prompt to confirm your entry,
press .
8.A list of telephone systems displays. Note that you can use the  and 
keys to scroll through all available selections.
Enter the number corresponding to the
.telephone system...

8 LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 118. The Install program must reboot the Lite system unit to make the changes indicated.
Press 
 when the system displays the reboot prompt. After the system reboots, the
Line Status screen displays.
2.5.5 Specifying System Information
System Information screens contain system setup information that applies system-wide, to all’
boxes set up on the system. There are six System Information screens:
0 General Information Screen
0 Line Information...

r;‘, LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1of the phone systems identified below, the Integration program automatically sets fields on
several System Information screens to the phone system’s default settings. Unless you
customize the phone system defaults, you probably do not need to modify these settings.
Comdial DigiTech 
/ Impact / DSU - Serial Integration
Comdial DigiTech 
/ Impact / DSU - Serial Integration - IVPC
Comdial DXP, DXP Plus, FX 
- Serial Integration
Comdial DXP, DXP...

8 LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
l
.
l
.
.
l
.
l
l
.
.
l
.
l
l
.
l
l
l
.
l
l
.
.
l
.
.
.
.
l
l
.
l
.
.
l
l
l
Mite1 SX200 Light with ONS Integration
Mite1 SX2000 and SX2000 Light with COV Integration
Mite1 SX2000 and SX2000 Light with DNIC Integration
Mite1 SX50 with COV Integration
Mite1 SX50 with DNIC Integration
NEC Electra Professional Level I
NEC Electra Professional Level II
NEC Mark II
NEC NEAX- 1400 IMS
NEC NEAX-2000
NEC NEAX-2400 Serial Integration
Nitsuko DSO-I 
/ ONYX...

8 LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
lVodavi Infinite DVXI, DVX2, & DVX3
lVodavi Starplus 2448EX / 4896EX
l Vodavi 
Starplus 96EX
l Vodavi 
Starplus Digital
l Win 
1OODIf you are using a telephone system that is not listed here, the Integration program sets fields
on System Information screens to commonly used defaults. You may need to adjust these
settings.
For detailed information on integrating the Lite system with the phone system, refer to both
the 
Instnllation md Muintenance...

ci‘ LITESYSTEMINSTALLATIONANDSUPERVISORGUIDE~II VER. 1
3.From the Main Menu, select SYSTEM INFORMATION. The System Information menu
displays.
:
 : .:y.:.,.2.5.5.4 Setting Up the General Information Screen
1.From the System Information menu, select GENERAL. The General Information setup
screen displays.
2.Press  to move the cursor to the AUTOMATICALLY EXIT TO DOS AT field. Enter
the time at which the Lite system should exit to DOS to perform its auditing functions.
The default setting is 3:00 AM.
3.To...

cil, LITE SYSTEM INSTALLATION AND SUPERVISOR GUIDE 9.0 VER. 1
7.To save the information and exit the screen, press . The System Information
menu displays.
‘..
2.5.5.6 Setting Up the Business Hours Screen
1.From the System Information menu, select BUSINESS HOURS. The Business Hours setupscreen displays.
2.For each day of the week, enter the office opening time in the DAY SERVICE BEGINS
field and the office closing time in the DAY SERVICE ENDS field. The default is au office
open time of 8:00 AM and office...

ci‘, LITESYSTEMINSTALLATIONAND SUPERVISORGUIDE~.~ VER. 1There are 8 classes of services (0 through 7) that can be set up then applied to mailboxes on
the Lite system. Two of them are pre-configured on the system. Class of service 0 is
assigned by default to the prototype mailbox 9994, which serves as a template for every
mailbox that you create on the system. Class of service 7 is assigned supervisor mailbox
privileges. This class of service is assigned to mailbox 70, which is also pre-configured on
the...