Comdial Impact Dsu Ii Lcd Speakerphone Instructions Manual

Program the auxiliary jack enable/disable buttons (at any
blank programmable button location) as follows:
1.PRESSINTERCOM.
2.DIAL
.
3.PRESSprogrammable button.
4.DIALa feature code:
= Headset Button,
= External Ringer Button,
= Tape Recorder Button,
	= External Pager Button.
5.PRESSTRNS/CONF.
6.REPEATEDLY PRESSprogrammable buttonAND DIAL
separate codes until all four buttons are programmed,OR PRESS
SPEAKERto end.


To use an auxiliary jack feature button,
1.PRESSdesired button to enable...

Dial by Name
The dial by name feature allows you to use the display and
interactive buttons of your LCD speakerphone to search
through a preprogrammed index of intercom or system speed
dial names, locate a desired name, and automatically call the
located name.


To use dial by name,
1.SELECT
OPTIONSto enter the dial by name
menu.
2. From the dial by name menu,SELECT
INT
button for intercom calling,OR SELECT
EXT
for system speed dial calling.
3.DIALthree digits for the first three letters of the
name you...

Programmed Button Display
You can cause the display to identify the function of each button on your telephone.


To button query your telephone,
1.SELECT
OPTIONS.
2.SELECT
NEXTuntil the
QUERYoption
appears.
3.SELECT
QUERY.
4.PRESSthe button in question.
5.READthe displayed information (display will
hold for few seconds before the telephone returns to idle).
LCD Speakerphone Station User’s Guide 65
GCA70-281 Other Features
Button Query
Press Any Button
Button Query 

Automatic Set Relocation
If your installer has equipped your system with automatic set relocation, when you
move your telephone to a new location, the system gives you a choice (through a
display prompt) as to whether you want to keep your previous programming or use
the programming in the new location.


To maintain the extension number and programming features
from the old location,
1.CONNECTthe telephone line cord to the new jack.
2.OBSERVEthe flashing HOLD lightAND PRESSHOLDwhile the
light is still...

Account Codes
If the installer has arranged your system for account code entry, your display may
prompt you to enter an account code after answering a call.


To enter account code on an incoming call,
1.IFavailable,PRESSprogrammed ACCOUNT CODE button (the
call in progress is not interrupted).
2.IFnot available, PRESSINTERCOMAND DIAL
(call is
automatically placed on hold).
3.DIALAccount Code. Your telephone automatically returns to the
call after you’ve dialed the complete account code.
If the...

Paging
Your system provides an all-call or a zone page feature that you access by dialing
special codes. This arrangement sounds your voice announcement through the
telephone speakers or through an external paging unit.


If your system provides an external paging unit,
1.LIFThandset.
2.PRESSINTERCOMAND CHOOSEone of the following options:
DIALextension number of station equipped and enabled for
paging (see programming section of this user’s guide), or
PRESSpaging button assigned by the installer, or...

Do Not Disturb Condition
This feature keeps calls from ringing at your LCD speakerphone and makes your
station appear to be busy to intercom calls. As a reminder, a station that is set in Do
Not Disturb mode will display this information on the LCD.


To enable DND, proceed as follows:
1.SELECT
OPTIONS.
2.SELECT
NEXTuntil the
DNDoption appears.
3.SELECT
DND.
4.SELECT
ON.
5.SELECT
PREV.
6.PRESSSPEAKERto end.


To disable the DND condition,
1.REPEATthe above procedure,BUT SELECT
OFFinstead of
ON
at step...

Data Interface Unit
The Data Interface Unit, or DIU, is an optional external device that may be part
of your system installation. It provides connections for both your telephone and
an IST device such as a standard single-line telephone, a FAX machine, a data
modem, a cordless telephone, or an answering machine.
If the installer has arranged your station in this manner, you can switch between
your telephone and the IST device by pressing the DATA button that the installer
has programmed on your...

IMIST Module
Impact SCS8324F-**, 8324S-**, and 8312S-** speakerphones equipped with the
optional IMIST module can support an IST device (modem, FAX machine, indus
-
try-standard telephone, etc.) in addition to the LCD speakerphone. Depending on
system programming, the IST device may be used to make outgoing calls and
receive incoming calls.

The IMIST module does not have its own extension number and does not
function simultaneously with the speakerphone.
NOTE: The IMIST module does not provide voltage...

DSS/BLF Console Operation
The IB64X, IB48X, and IB24XDSS/BLFconsoles have additional buttons and
status lights that extend the memory button capability of an adjacent companion
telephone. The buttons can be programmed for automatic dialing (speed dial) or
direct station selection (DSS) with busy lamp field (BLF) using the instructions
provided previously in this guide.
When the installer assigns aDSS/BLFconsole to a station port, the system recognizes
it as such and automatically designates the console...