Comdial Impact Dsu Ii Lcd Speakerphone Instructions Manual

If the intercom party does not answer their
telephone when ringing, take one of the
following steps:
1.SELECT
CAMPto camp-on to the station.
2.SELECT
MSGto leave a message-waiting indica
-
tion at the station.
Unscreened Call Transfers
You can answer a call at your LCD speakerphone and transfer it to another
telephone. If you transfer the call without first announcing it, you have made an
unscreened transfer.


To transfer an unscreened call to another system telephone,
1.ANSWERcall....

Conferencing
Creating a Conference Call
When your telephone is joined together with several other telephones on the same
call, the effect is called conferencing. You can make conference calls that involve up
to five parties, including you as the originating party, in any combination of outside
lines and intercom parties.
NOTE:When setting up a conference call with outside lines and internal tele
-
phones, you must call the outside lines first.


To set up a conference call that includes both outside...

Unsupervised Conference Calls
If you are involved in a conference call with two outside lines, you can drop out of
this established conference call and leave the outside lines in the conference with
each other. This is known as an “unsupervised conference” call.


To drop out of a conference call between you and two outside
lines (creating an unsupervised conference),
1.DIALAND HANG UP(lines remain lighted/in use until one or
both outside parties disconnect).


To rejoin an unsupervised conference...

Call Parking
You can place an outside call on hold in the system so that it can be answered from
any station even though it does not have a line appearance for the call. You accom
-
plish this by placing the call in one of nine park orbits, where the call remains until it
is answered.


To place an outside call on hold within the system where it
can be answered at any telephone in the system (parking a
call in orbit),
1. While on the call,PRESSINTERCOMAND DIAL.
2.DIALcode for park location (orbit) (...

To place a park recall on hold at your
station,
1.SELECT
HOLD. After the call remains on hold
for a period of time, it rings back to your telephone
as a hold recall.
LCD Speakerphone Station User’s Guide 37
GCA70-281 Advanced Call Handling
HOLD SHIFT
TA P
1
4
72
5
8
03
6
9
#OPER PRSGHI
TUVJKL ABC
WXYMNO DEF
HOLD SHIFT
TA P
1
4
72
5
8
03
6
9
#OPER PRSGHI
TUVJKL ABC
WXY MNO DEFHOLD SHIFT
TA P
1
4
72
5
8
03
6
9#OPER PRSGHI
TUVJKL ABC
WXY MNO DEF
HOLD SHIFT
TA P
1
4
72
5
8
03
6
9#OPER PRSGHI
TUVJKL ABC...

Call Forwarding
Forwarding a Call
You can forward calls that normally ring at your telephone to another telephone for
answering. You can forward just your prime line and intercom calls or you can
forward all calls that ring at your telephone.


To forward your calls,
1.SELECT
OPTIONS.
2.SELECT
NEXTuntil
CFWDappears.
3.SELECT
CFWD.
4.SELECT
PERSfor prime line and intercom calls,
OR SELECT
ALLfor all calls.
5.SELECT
SETto enable call forwarding.
6.DIALextension number of telephone to receive
your forwarded...

To activate the CFOS feature,
1.PRESSINTERCOM	.
2.PRESSthe speed dial button programmed with the target number,
OR SELECTa lineAND DIALnumber (max 16 digits).
3.PRESSHOLDfor PauseOR PRESSTA Pfor Flash.
4.PRESSSPEAKERto end.
NOTE: CFOS must be initiated by installer programming.


To deactivate the CFOS feature,
1.PRESSINTERCOM	.
* Comdial has taken reasonable step in the design of all product features, including CFOS,
which protect against unauthorized or fraudulent access to, or use of, a system,...

Notes
Advanced Call Handling GCA70-281
40 LCD Speakerphone Station User’s Guide 

Nonverbal Messaging
Station-To-Station Message Delivery
When you call another telephone and receive no answer, you may leave a reminder
that you have called. Do this by turning on the BLF light at the called telephone.
If your telephone is not stored as aDSS/BLFbutton at the called telephone, your
messaging call goes to the central message desk, if one is programmed. The central
message desk (usually the system attendant) takes your message and turns on the
message waiting light of the telephone that you...

Message Waiting Light and Messaging
If your telephone is designated as a central message desk by the system or has
message wait originate ability, you can turn on the message waiting light of any
other telephone.


To turn on the message waiting light at
another telephone when that station is
busy,
1.HEARthe busy toneAND REMAINon the
line.
2.SELECT
NEXT.
3.SELECT
MSG.
4.HANG UPhandset.


To turn on the message waiting light at another telephone
when that station rings with no answer,
1.SELECT
MSG.
2.HANG...