Comdial Executech 2000 Telephone System Instructions Manual

IMI66-068Description Of System FeaturesIntercom Line Timeout
Should the intercom line be selected with no dialing or other action taking place, the intercom will timeout after ten
seconds, and return to an idle state. No class of service programming is required.L.
Last Number 
Rediul
The system provides each station with a last number redial feature.This feature will save 32 digits of the last
outside number dialed. A newly dialed number will always automatically replace a previously dialed number.
Upon...

Description Of System FeaturesIMI64-068Line to Line Port Reassignment-3.6.1 
O-
You can reassign the programming attributes for a line connected to a particular line port to a different line port with
this programming action. 
This feature allows you to automatically exchange all software attributes of one line with
those assigned to another at a different line port without physically relocating the lines or reprogramming any of the
attributes.
M.Manual Hold
A button activated feature at each station...

ZMZ66-068Description Of System FeaturesMusic-on-hold System-wide 
Enable/Disable-3.5.8-
The system provides music to outside lines that are placed on hold if an external music source is connected to the
system. Music-on-hold can be disabled system-wide by attendant action.Also see -Music Interface and
Music-On-Hold.
Mute
Each station has a MUTE button that, when pressed, will mute the handset transmitter (or internal microphone on
speakerphones) to prevent the user’s voice from b,eing heard by the...

Description Of System FeaturesMI66-068Personalized Ringing 
Tone-3.7.28-
This feature allows a station user to choose one of four different ring tones to aid in distinguishing one ringing
station from another.Pooled Line Access
Users can dial a special access code instead of pushing a line button to access one of four different groups of lines.
Single-line keysets do not have line appearances, so a user must use this feature for accessing an outside line for
dialing out.Lines are arranged into groups...

ZMZ66-068Descri@on Of System Features
.:
Pulse / Tone Switchable-3.6.11- and -3.6.12-
You can program the system on a per-line basis to allow the stations to switch from pulse to DTMF dialing as
needed. Alternately, you can program the system to only allow tone dialing.Response Messaging
This feature allows a user to reply in a non-verbal mode to a SOHVA call non-verbally when the intercom caller is
using an LCD speakerphone.
A station user can press a programmable button in response to an intercom call...

Description Of System Features
SOHKA Groups-3.7.3”
SOHVA groups allow the user to send a SOHVA message to a selected group of stations.
SelfDiagnostics
Each station can execute a self test when so enabled. This test verifies processor, indicator, and tone functions. No
class of service programming is required.For a self diagnostic, hold down the MUTE key when plugging telephone
into the KSU.Service 
Observing-3.7.35-
Service observing allows a third party to enter an in-progress call in an unannounced...

IMI66-068Description Of System Features
;_’_’ ‘.Station Message Detail Accounting 
(SMDA)-3.16
You can program the system to automatically generate selected reports to be printed at a specific time of day.
Additionally, the system provides the selected report whenever the costed call storage reaches 95 percent of 
capacity.
There are five different SMDA reports which can be selected:l
Detailed report sorted by stationsl
Detailed report sorted by account codes
0 Line summary report
l Department summary...

Description Of System Features
.
IMI46-068Station-To-Station Messaging
If a station has a DWBLF appearance at another station, the station user can leave a call-back message indication at
that other station. By dialing a special code, the user can activate the BLF light at the called station. 
This light
indicates that another station has requested a callback.
The system automatically turns off the light if a successful
callback is made.
If you have not programmed a station number for a DSS/BLF...

IMI66-068Description Of System FeaturesToll Restriction (0 And 1)
See the discussion titled: Toll Restriction Iflexible).Toll Restriction 
(Flexible)-3.15-
You can program system toll call restriction to prohibit some or all stations from calling a wide range of number
combinations. The restricted numbers are specified on up to 16 tables. The system assigns several broad-range
values to two of these tables, and assigns the tables to all lines as a default condition.All you need to do is to default
the...

Description Of System FeaturesI&l66068u.
Unanswered Call Transfer Recall Timing-3X21-
A transferred call that goes unanswered after a pre-programmed length of time will return to the station that
transferred it. The system will return the 
call to both attendant stations when you have enabled the tandem attendant
feature. When the station uses an LCD speakerphone, the display will show the station number or name as well as
the line that is being re-called. Also 
see--Tandem Attendant.v.
Voice Announce...