Comdial Dxp Digital Communications System Instructions Manual

Understanding The LCD Displays 
System Speed Dial 
-1 Aftery0udialITcM*#0*02,this 
appearsinthedkplay. 
FI 
After entering storage locatioq one of 
the=messages aPPeam 
-OR- 
I 
I 
1 “Line Num her” XXX 
28  

Glossary Of Terms 
Glossary 
A 
All-call paging: 
Paging through the intercoms of all stations in the sys- 
tem. 
Alternate Button: When an attendant presses this button, all calls nor- 
mally touted to his or her telephone are then routed to an alternate 
attendant’s telephone instead. 
Answer button: An installer-programmed button that allows a user to 
answer a call that is audibly ringing at his or her station (it is possible 
for more than one call to be ringing at the same time; however, only 
one...

Glossary Of Terms 
. 
Do not disturb: 
A mode that disables incoming call ringing and inter- 
corn calling. 
Dual Tone Multiple Frequency (DTMF): The tones made by your 
telephone when you dial. 
E 
Exclusive hold: Only the telephone placing the call on hold can 
retrieve it. 
Executive override: Breaking into a conversation at a busy called 
telephone. This intrusion is announced by several quick tone bursts 
over the conversation. 
Group intercom number: A number that is available for use by 
several...

Glossary Of Terms 
0 
Overflow Button: 
When an attendant presses this button, calls that nor- 
mally ring at the attendant’s telephone also ring at an overflow 
attendant’s station. 
P 
Personal intercom number: A unique number assigned to a station for 
the exclusive use of that station’s user. 
Personal ringing tones: A telephone can be arranged to ring in one of 
four distinctive tones. 
Prime line: A line designated to a particular telephone and automat- ’ 
ically selected when the handset is...

Glossary Of Terms 
Speed dialing: 
One or two-button dialing using the keypad buttons or 
other programmable buttons. Speed dialing can be station calls (per- 
sonal and accessed by only one specific user) or system calls (numbers 
used and accessed by anyone in the system). 
Split button: Users can press this installer-programmed button to 
switch between the last call placed on hold (intercom, outside line, or 
conference) and a current, active call. 
T 
TAP: Depending on your system’s programming,...

NOTES 
, _-  

NOTES 
.  

:  

llda manual has been developed by Chndial Corporatim (the “Cunpany”) and in intaxIed for the 
useofitrcustomera and wvicepcrxameL Theiafom~ationiathiimanualia subjccttochange wirhout 
nc4ia. While every effort lur been made to dimi~re ermn, the Canpanydisclaims liibility for any 
diiicultiu arisiig fmm the inlapmtaticm d the k&math amlained herein. The information 
contained herein dou not pulput to cover au detail: or ValiatiorM in equipment nor to p&de for 
~~Itller id  rible amtiugency to he met in...