Comdial Dxp Digital Communications System Instructions Manual

c 
DXP - 
Digital Communications System 
System User’s Guide 
For DigiTech Telephones 
(Attendant Supplement) 
-COMDlAtm  

This user’s guide is applicable for the 
following telephone models: 
77OOS-** Rev A through H 
7714S-** Rev A through H 
7714X-** Rev A through H 
. 
r  

Table Of Contents 
Using This Supplement ............................. 1 
Programming The Attendant Features ................ 2 
Creating The LCD Messages ....................... 
2 
Line Disable Programming ........................ 
6 
Naming The System Telephones .................... 
8 
Naming The Telephone Lines ..................... 12 
SettingTheNightTransferOfRingingMode.. ....... 16 
Setting The System Clock ........................ 17 
Storing The System Speed Dial Numbers ............ 18...

Using This Supplement 
c 
Using This Supplement 
To help you use your attendant’s telephone to its fullest capacity, this’ 
supplement to the system user’s guide describes the attendant’s 
telephone and tells you how to use it. 
You can program special features on your telephone that am unique to 
attendant station operation. The instructions for programming these fea- 
tures and special attendant buttons are included in the sections titled 
l Programming The Attendant Features 
l Using The Special...

Programming The Attendant Features 
Creating The LCD Messages 
System users send and receive non-verbal messages for display on 
LCD speakerphones. Users send these messages so that callers will 
know their status when they call and get no answer. Or they use a mes- 
sage to respond to a secure off-hook voice announcement, LCD mes- 
sages are either those that the DXP system provides or those that you 
create. The system provides five messages; you can add an additional 
25 customized messages. This...

Programming The Attendant Features 
I Take Message 
H ITCM 
Button 
*.. Continutd on the flowing page. . . 
3  

Programming The Attendant Features 
CHARACIRR 
A 
B 
C 
D 
E 
F 
G 
H 
I 
N 
0 
P 
E 
R 
S 
T 
U 
V I 
W 
X 
E 
Y 
Z 
Letter Code Table 
73 S 76 
81 t 84 
82 
U 85 
83 
V 86 
91 
W 94 
92 
X 95 
93 
Y 96 
13 2 16 
4  

Programming The Attendant Features 
LCD Message List 
Location 
Code Message Letter Codes 
01 Back at system message 
02 Cdl system message 
03 Ask them to hold system message 
04 Take a message system message 
05 I will call back system message 
06 
1 08 
I 
I  

Programming The Attendant Features 
Line Disable Programming 
You can disable a line and make it unavailable for system use if it be- 
comes unusable for some reason. 
Disable a line as follows: 
. press ITCM, 
l dial+N#OO32, 
l dial l# - 99#, 001 - 128 for lines 1 - 128. 
NOTE: If the desired line code is kss than the digits, dial # once qfter you dial 
the code. For example, dial l# 
for line I or 19# for line 19. 
l press #to disable line (LCD speakerphone displays show a +# to 
indicate a disabled...

Programming The Attendant Features 
r0 - 9