Comdial Dxp Digital Communications System Instructions Manual

Programming The Attendant Features 
Naming The System Telephones 
You can assign either a personal name or a group name to each system 
telephone. This name can be up to seven letters in length and will show 
up in the user’s display and/or in the called party’s display. Typical 
names could be SRVC, MKTG 1, K SMITH. 
Name the system telephones as follows: 
l 
l 
l 
l 
l 
l 
l 
l 
l 
l Use letter code table to compose names for all telephones requir- 
ing them (up to seven letters per name is allowed),...

Programming The Attendant Features 
SPKR 
Butto 
continued on the following-pgr , .  

Programming The Attendant Features 
Letter Code Table  

Programming The Attendant Features 
Station Names 
(Record telephone names here. Copy this sheet if you need more 
record space.)  

Programming The Attendant Features 
Naming The Telephone Lines 
You can assign names to lines to aid users in identifying the proper line 
to use. A line name can be up to seven letters in length and will show 
up in the user’s display 
Name the system telephones as follows: 
l Use letter code table to compose names for all lines requiting 
them (up to seven letters per name is allowed), 
. press ITCM, 
l dialS#OO33, 
l dial l# - 99#, 0010 128 to select line 1 - 128, 
NOTE: rf the desired line code is...

Programming The Attendant Features 
SPKR 
Butto 
0 0 0 0 0 11 / 
continued on the following poBc . 
r  

Programming The Attendant Features 
Letter Code Table 
14  

Programming The Attendant Features 
Line Names 
(Record line names here. Copy this sheet if you need more record 
space.) 
15  

Programming The Attendant Features 
Setting The Night Transfer Of Ringing Mode 
You can enable an operating mode that automatically transfers all in- 
coming calls to a particular telephone or group of telephones for 
answering. 
To enable or disable the night transfi~of 
xinging mode, 
l press ITCM. 
l dial+##O+#OO, 
l dial 1 to enable the feature, 
I 
l dial 2 to turn the feature off, 
l press SPKR to end. 
. 
SPKR 
Butto ,O 
i-- 
16  

Programming The Attendant Features 
Setting The System Clock 
The system clock provides a date and time for display at LCD speaker- 
phones connected to the system. 
To program the system clock for cunent date and time, 
l press ITCM, 
l dial++##O+KOl, 
l dial two digits 
(01-12) for month, 
l dial two digits 
(01-31) for day, 
l dial two digits (00-99) for year, 
l dial two digits (00-23) for hour, 
l dial two digits (00-59) for minute, 
l dial # to save, 
l press SPKR to end. 
SPKR 
Buitor