Comdial Dsu II LCD Speakerphone System Reference Manual

10.6 Response Message Programming
This program lets you set up a button to be used for making a
non-verbal response to a SOHVA or an intercom call. The response
appears in the display of the calling station.
·To assign a button for non-verbal response:
1. PressINTERCOMSS1.
2. Press the programmable button you want to use for
message access.
3. Dial5.
4. Dial a message number (0through9).
NOTE: The preprogrammed messages are created by the
attendant.
5. PressSPEAKERto end.
10.7 Automatic Redial...

10.8 Assist Button Programming
With this feature you can program an “assist” button on your telephone
that will let you send a message to an LCD speakerphone. By pushing
this button you can let a party at another station know, with a tone and a
station message display, that you need assistance with a call.
Then, after receiving the tone and the display message, that person can
join the call or monitor it through executive override or service
observing.
To program an assist button,
1. PressINTERCOMSS1.
2....

10.10 Subdued Off-Hook Voice Announce
(SOHVA) Button Programming
You can program a button at your station that may be pressed to enable
the delivery of a SOHVA call. With this SOHVA enable button you can
decide, after hearing a busy signal, whether the called party should be
interrupted in a SOHVA manner. If so, you can press the button and
complete the SOHVA call.
To program a SOHVA button,
1. PressINTERCOMSS1.
2. Press desired programmable button.
3. Dial8.
4. PressSPEAKERto end programming.
10.11...

This page remains blank intentionally. 

Troubleshooting
Your Telephone
11.1 Using Your Troubleshooting Guide
Should yourImpactorImpact SCStelephone fail to operate properly,
or if you do not understand why it is operating in a certain manner,
review the following Troubleshooting Guide for help.
SYMPTOM POSSIBLE CAUSE
INTERCOM light is
flashing.Your messaging is set. Dial
INTERCOM,then#02andhangup.
MESSAGE light (models
8312S, 8324S)
or
HOLD light (models 8012S,
8024S) is flashing.Another telephone has activated your
message waiting light....

This page remains blank intentionally. 

Glossary
A
All-call paging:Paging through the intercoms of all stations in the
system.
Assist button:A button that you can program that will let you send a
message requesting assistance to the LCD of another telephone.
Automatic callback:System will ring a calling telephone when a busy
called telephone becomes idle.
Automatic dialing (or Autodialing):Using programmable buttons to
store numbers for one- or two-button dialing.
Automatic redialing:Turning on a program that automatically redials
the last...

Departmental station operation:The operation of stations that are
organized into departments.
Direct Inward Station Dialing (DISD):This feature allows an outside
party to call an intercom station directly without an attendant’s assistance.
Direct Station Selection/Busy Lamp Field (DSS/BLF):Using one
button to place intercom calls; the button is sometimes referred to as a
DSS button. Busy lamp field or BLF is a term for a light that identifies
current call status of DSS station.
Do not disturb:A mode that...

M
Messaging:Turning on a telephone lamp to let the user know that a
message awaits pickup and leaving a message on the display of a
telephone that gives information on your status.
Mute:A fixed feature button that keeps a distant party from hearing
your conversation. This button also lets you adjust the telephone display
contrast from light to dark.
N
Night transfer:Transferring incoming calls to a particular station(s) for
off-hour answering.
P
Personal ringing tones:A telephone can be arranged to ring...

Subdued off-hook voice announce:A private announcement that can
be made to a busy party which they hear through the receiver of their
handset.
Speed dialing:Autodialing using the keypad buttons. Speed dialing can
be station calls (personal and accessed by only one specific user) or
system calls (numbers used and accessed by anyone in the system).
System Alarm Reporting:Allows you to view (through the LCD
telephone screen) the various system alarms and the stations with which
those alarms are associated....