Comdial Dsu II LCD Speakerphone System Reference Manual

·If you are the recipient of a station-to-station message reminder
(a BLF light is fluttering), answer it as follows:
1. Press DSS button associated with lighted BLF light.
GCA70–245 Using Non-Verbal Messaging
LCD Speakerphone Reference Manual 9–5 

This page remains blank intentionally. 

Programming
Your Telephone
10.1 Programming For Automatic Dialing
·Automatic dialing is a feature that lets you:
-dial lengthy numbers using one or two buttons,
-store frequently used feature codes,
-store intercom extension numbers of frequently called
telephones.
·You can store numbers for automatic dialing at the
following locations:
-at any programmable button that isnot now assigned as a line
button or other featureby the system administrator or installer,
-on a secondary level under a DSS button...

10.1 Programming For Automatic
Dialing —continued—
The outside numbers and feature codes are commonly referred to as
autodial numbers when they are stored at the programmable button
locations; however, they are referred to as personal speed dial numbers
when they are stored at the 10 keypad number locations. The intercom
extension numbers are referred to as direct station selection (DSS)
numbers. Plus, the light associated with the DSS button is referred to as
the busy lamp field (BLF) light.
·Before you...

Autodial Numbers
113
214
315
416
517
618
719
820
921
10 22
11 23
12 24
Personal Speed Dial Numbers (Keypad
Buttons)
05
16
27
38
49
GCA70–245 Programming Your Telephone
LCD Speakerphone Reference Manual 10–3 

10.2 Storing Autodial And Speed Dial Numbers
·To store an outside number or a feature code as an autodial or
speed dial number, follow the display prompts and proceed as
follows:
1. PressOPTIONS.
2. PressNEXTuntilADIALandSDIALis displayed.
3. PressADIALto choose autodial programming orSDIALto
choose speed dial programming.
4. Press programmable button or keypad button to choose storage
location.
5. Press line button to dial out on or pressINTERCOM,
—OR—
if your system provides line groups,...

10.3 Storing A DSS Number
NOTE: You cannot store more than one DSS number at a
programmable button location; however, you can store a
feature code or autodial number at a second level for a button
location that already has a programmed DSS.
·To store an intercom extension number as a DSS number,
proceed as follows:
1. PressOPTIONS.
2. PressNEXTuntilDSSappears.
3. PressDSS.
4. Press programmable button to choose location.
5. Dial extension number.
6. Press next location button and store next DSS number....

10.4 Storing The Feature Buttons
If you find that you are using certain miscellaneous features often, access
buttons may make operation easier. Create access buttons as you need
them.
Account Code Button—allows you to enter an account code for call
record purposes.
Automatic Call-Back (Camp On) Button—arranges the system to ring
your and another’s telephones as soon as their telephone becomes idle.
Call Forward Button—provides one-button forwarding of all of your
calls to another telephone.
Call Park...

·To create these feature access buttons proceed as follows:
1. PressOPTIONS.
2. PressNEXTuntilFEATappears.
3. PressFEAT.
4. PressNEXTrepeatedly until desired feature choice is displayed.
5. Press one of the buttons below currently displayed selections to
choose desired selection.
6. Respond to any menu prompts associated with feature (such as
all-call or zone 1 to 3 for PAGE or orbit 1 to 9 for PARK).
7. Press programmable button for storage location.
8. PressPREVorNEXTuntil next feature choice is...

10.5 Storing The Special Purpose
Feature Buttons
In addition to the feature buttons discussed on the previous page, there
are six special purpose buttons that you can arrange as needed. These
buttons provide the following features:
Assist Button—sends a message to an LCD speakerphone that lets
user know, with a tone and a station message display, that you need
assistance.
Automatic Redial Button—causes the system to automatically dial
(every minute for 10 minutes) the last number that you dialed and...