Cisco Touch 8 User Guide

71
You may specify whether to use IPv4 or IPv6 and whether to use static IP 
address or DHCP.
When set to Static, applicable  addresses must be set accordingly. 
To change these from default values,  tap Advanced (not shown).
Caution! There is no Cancel 
function letting you exit the menu  undoing any changes you have 
made. Take care!
Settings
Administrator Settings—IP & VLAN, CodecAbout IP Settings
To exit 
Administrator  Settings, tap  Back.
To exit Settings  as such, tap  Exit.
Note that there  is no...

72
This is designed to provide your video support team with information about the current network status of 
the Touch Controller in the unlikely 
case of system malfunction.
Settings
Administrator Settings—Network Status CodecAbout Network Status
To exit 
Administrator  Settings, tap  Back.
To exit Settings  as such, tap  Exit.
Note that there  is no Cancel 
function letting  you exit the 
menu undoing 
any changes you  have made.
 Take care! 
D1458221 User Guide Cisco TelePresence
Profile Series, Codec...

73
You may specify whether to use IPv4 or IPv6 and whether to use static IP 
address or DHCP.
When set to Static, applicable  addresses must be set accordingly. 
Caution! There is no Cancel 
function letting you exit the menu  undoing any changes you have 
made. Take care!
Settings
Administrator Settings—IP & VLAN, TouchAbout IP Settings
To exit 
Administrator  Settings, tap  Back.
To exit Settings  as such, tap  Exit.
Note that there  is no Cancel 
function letting  you exit the 
menu undoing 
any...

74
This is designed to provide your video support team with information about the current network status of 
the Touch Controller in the unlikely 
case of system malfunction.
Settings
Administrator Settings—Network Status TouchAbout Network Status
To exit 
Administrator  Settings, tap  Back.
To exit Settings  as such, tap  Exit.
Note that there  is no Cancel 
function letting  you exit the 
menu undoing 
any changes you  have made.
 Take care! 
D1458221 User Guide Cisco TelePresence
Profile Series, Codec...

75
Use this page to set up SIP.
Caution! There is no Cancel 
function letting you exit the menu undoing any changes you have 
made. Take care!
Settings
Administrator Settings—SIPAbout SIP Settings
To exit 
Administrator  Settings, tap  Back.
To exit Settings  as such, tap  Exit.
Note that there  is no Cancel 
function letting  you exit the 
menu undoing 
any changes you  have made.
 Take care! 
D1458221 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20 
SX20 Quick Set, MX200,...

76
Use this page to set up H323.
Caution! There is no Cancel 
function letting you exit the menu undoing any changes you have 
made. Take care!
Settings
Administrator Settings—H323About H323 Settings
To exit 
Administrator  Settings, tap  Back.
To exit Settings  as such, tap  Exit.
Note that there  is no Cancel 
function letting  you exit the 
menu undoing 
any changes you  have made.
 Take care! 
D1458221 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20 
SX20 Quick Set, MX200,...

77
If the Touch controller is used in 
environments with considerable 
amounts of electromagnetic noise  present, you may experience an 
appearance of false signals—as  if someone tapped the Touch 
controller when obviously nobody 
did so. 
To cope with this you may set the  EMC Resilience Mode to On. You must then press and hold for a little while, rather than just tap, in 
order to make the system aware of 
your tapping. This will prevent the  appearance of spurious signals. 
Caution! There is no...

78
You may want to perform a Factory Reset your video system. Note that you will loose all configurations, the  call history and your local list of 
contacts (Favorites and Recents). Release keys and options installed 
will be retained.
Caution! There is no Cancel 
function letting you exit the menu  undoing any changes you have 
made. Take care!
Settings
Administrator Settings—Factory ResetAbout Factory Reset
To exit 
Administrator  Settings, tap  Back.
To exit Settings  as such, tap  Exit.
Note that...

Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco Website at www.cisco.com/go/offices.
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries.  A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks.  Third party trademarks mentioned are the 
property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and...