Cisco Touch 8 User Guide

51Camera
Move the Selfview PiP
The Selfview shows what others see from your video system. You will normally use it to confirm that they see what you want them to see.
The Selfview appears as a PiP  (Picture-in-Picture).
From time to time you may want to have the Selfview activated during 
the meeting. This could, for example,  be to ensure that a lecturer in your 
room remains seen on the screen 
despite constantly moving around. 
It may happen that the current 
position of the Selfview blocks  important...

52Camera
Control the Camera of the Other Participant
Within video conferencing the term 
far end is often used to refer to the  one you are talking to.
Likewise, the term near end is often  used to refer to your side of the 
video meeting.
The ability to control the far end  camera requires that the far 
end system camera is remotely 
controllable. The feature cannot be 
applied to systems with a manual 
camera adjustment.
You will not have access to any  presets that may exist on the far end 
video...

53
Settings
The video endpoints whose use is described in this guide can be configured via the Touch screen 
controller or via its web interface. 
For full access to all configurable  parameters the web interface must 
be used—the Touch pad provides 
access to a limited set of parameters 
only. 
D1458221 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20 
SX20 Quick Set, MX200, MX300
Produced: December 2014 for TC7.3
All contents 

54Settings
Gain Access to the Settings
Care must be taken when altering the Settings to avoid that the system stops working. If in doubt, contact 
your video support team.
For security reasons, access to the 
Administrator Settings may have  been password protected by your 
video support team.
To enter the Settings, tap the  Settings icon in the upper left 
corner of the touchpad, as outlined. 
About Settings
Scroll through the list to locate what you are looking for. Tap the field in the upper left...

55Settings
Ringtone & Sound
The Ringtone & Sound Settings window lets you specify:
• Key tones  On or Off . When set 
to on you will hear a sound every 
time you tap a field on the Touch 
controller.
• Ringtone volume . How loud your 
ringtone shall sound.
• Ringtone . Select among several 
ringtones. You will hear a sample 
every time you tap a ringtone.
Note how the settings chosen are  indicated. In the example shown,  Keytones is set to On.
To exit this menu putting any  changes into effect, tap...

56Settings
Camera Control
The Camera Control  window lets you set the whitebalance and exposure of the camera. If you do not want to tweak this yourself, just  leave it up to the system by tapping 
Auto.
Backlight compensation comes in handy when there is much light 
behind you. Without compensation 
you will easily appear very dark to  the far end.
Note how the settings chosen are  indicated. In the example shown, 
Backlight compensation is set to Off.
About Camera Control 
D1458221 User Guide Cisco...

57
Select what shall be the main source. 
You may still choose another when  working with the system, but what 
you specify here will be the default  setting. 
The options available are system  dependent, your system may show more options or less options.
Main Source Selection
Settings
About Source Selection 
D1458221 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20 
SX20 Quick Set, MX200, MX300
Produced: December 2014 for TC7.3
All contents 

58
This menu allows you to set the DVI mode to Analog, Digital or Automatic 
detection.
Display
Settings
About DVI Mode 
D1458221 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20 
SX20 Quick Set, MX200, MX300
Produced: December 2014 for TC7.3
All contents 

59
The Language page lets you specify the Touch interface menu language.
Settings
Select LanguageAbout Language Setting 
D1458221 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20 
SX20 Quick Set, MX200, MX300
Produced: December 2014 for TC7.3
All contents 

60
The System Information window contains information on the system’s software and hardware versions and 
connections, SIP and H.323 status 
etc.
This information is typically what you  will be asked by the technical staff to provide in the unlikely event of system malfunction.
Settings
System InformationAbout System Information 
D1458221 User Guide Cisco TelePresence
Profile Series, Codec C-series, Quick Set C20 
SX20 Quick Set, MX200, MX300
Produced: December 2014 for TC7.3
All contents