Home > Cisco > Computer Hardware > Cisco Rfgw1d Manual

Cisco Rfgw1d Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Cisco Rfgw1d Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Cisco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							 
     
    78-4025112-01 Rev H0 247 
     
    If You Have Questions 
    If you have technical questions, call Cisco Services for assistance. 
    Follow the menu options to speak with a service engineer. 
    Access your companys extranet site to view or order additional 
    technical publications. For accessing instructions, contact the 
    representative who handles your account. Check your extranet site 
    often as the information is updated frequently.   
    17 Chapter 
    17 
    Customer Information  
    						
    							 
     
    78-4025112-01 Rev H0 249 
     
    A Appx auto letter 
    Appendix A 
    Technical Specifications 
    About This Appendix 
    This appendix provides system specifications for the RF Gateway 1.  
    Note: Technical specifications are subject to change without prior 
    notice.  
     
     
    In This Appendix 
     General Specifications ........................................................................ 250 
     Electrical Specifications ...................................................................... 252  
    						
    							 
    Appendix A 
    Technical Specifications 
    250 78-4025112-01 Rev H0 
    General Specifications 
    Introduction 
    The following table lists the general specifications of the RF Gateway 1 equipment. 
    Environmental Specifications  
    Item Specification 
    Ambient temperature range 
     Within specs 0 to 50°C (32 to 122°F) 
     Operation 0 to 50°C (32 to 122°F) 
     Storage -40 to 70°C (-40 to 158°F) 
    Operating humidity 5% to 95%, non-condensing 
    Chassis Mechanical Specifications  
    Item Specification 
    Height 1.75 in. (44.5 mm) (1 RU) 
    Width 19 in. (482.6 mm) 
    Depth 21 in. (533.4 mm) 
    Weight 27.5 lbs (12.5 kg) 
    Physical  
    Item Specification 
    Dimension 
     In mm (H x W x D) 44.5 mm x 482.6 mm x 533.4 mm 
     In inch (H x W x D) 1.75” x 19” x  21"   
    Weight 
     Fully loaded 12.5 kg (27.5 lbs) 
     Empty housing 6.6 kg (14.5 lbs)  
    						
    							 
     
     General Specifications 
     
    78-4025112-01 Rev H0 251 
     
    Power Supply Specifications  
    Item Specification 
    Power supply (nominal) 100 – 240 V AC ± 10% 
    –48 V DC (voltage range –38 to –58 V DC) 
    Power consumption (nominal) Typical < 345 Maximum < 410 W    
    						
    							 
    Appendix A 
    Technical Specifications 
    252 78-4025112-01 Rev H0 
    Electrical Specifications 
    GbE Input Interface  
    Item Specification 
    Number of inputs 2 + 2 (for redundancy) 
    Connector Electrical and optical small form factor 
    pluggable (SFP) 
    Interface type Gigabit Ethernet according to IEEE 802.3ab 
    (electrical) or IEEE 802.3z (optical)  
    Data rate Full line rate 
    Syntax VBR and CBR MPEG SPTS and MPTS on UDP 
    (RFC-768), RTP, L2TPv3, IGMPv3 
    Dejitter Buffering 150 ms 
    Management Interface  
    Item Specification 
    Interface type Ethernet 10/100Base-T 
    Connector 1 x RJ 45 
    Protocols HTTP, SNMP, FTP, RPC 
    DTI Interface 
    Item Specification 
    Interface type Ethernet 10/100Base-T 
    Connector 2 x RJ 45 Primary and Redundant 
    RF Outputs  
    Item Specification 
    Number of outputs Max. 12 (each with 4 adjacent QAM channels) 
    Connector F-type, 75 Ω 
    Frequency   
    						
    							 
     
     Electrical Specifications 
     
    78-4025112-01 Rev H0 253 
     
     Range Channel edges between 45 and 1000 MHz 
    (tunable) 
     Step size 1 kHz 
     Stability ± 3 ppm 
     Accuracy ± 3 ppm 
    Channel bandwidth 6, 7 or 8 MHz depending on QAM standard 
    Level 
     Range Quad Mode: 54 dBmV RMS Max per QAM 
    channel in 0.1 dB steps 
    Triple Mode: 55 dBm V RMS Max per QAM 
    channel on 0.1 dB steps 
    Dual Mode: 57 dBmV RMS Max per QAM 
    channel in 0.1 dB steps 
    Single Mode: 61 dBmV RMS Max per QAM 
    channel in 0.1 dB steps 
     Stability ± 1 dB 
     Accuracy ± 1 dB 
    Return loss > 14 dB 45-750 MHz 
    > 13 dB 750-870 MHz 
    > 12 dB 870-1000 MHz 
    Per DOCSIS 3.0 DRFI specification CM-SP-
    DRFI-103-060106 
    Signal Specifications  
    Item Specification 
    Channel encoding Randomization, Reed-Solomon, Trellis and 
    Interleaving according to ITU-T Annex A, B or 
    C  
    MER (before equalizer) ≥ 40 dB (at RF) 
    MER (after equalizer) ≥ 45 dB (at RF) 
    BER (256 QAM) ≤ 5x10-9 (ITU-A/C pre FEC) 
    ≤ 1x10-13 (ITU-B pre FEC/post trellis) 
    Bandwidth 6, 7 or 8 MHz (transmission standard 
    depending) 
    QAM constellation 64 & 256 QAM  
    						
    							 
    Appendix A 
    Technical Specifications 
    254 78-4025112-01 Rev H0 
     
    Specifications Optical Types SFP Modules 
    The following table describes the Prisma branded optical type SFP transceivers 
    available. 
    Part Number Type Distance Wave Length  Mode 
    4002019 WDM Up to 500m 850 nm Multi-mode 
    4002020 WDM Up to 5km 1310 nm Single-mode 
    The following table describes the Cisco branded optical type SFP transceivers 
    available. 
    Part Number Type Distance Wave Length  Mode 
    GLC-SX-MM WDM Up to 500m 850 nm Multi-mode 
    GLC-LH-SM WDM Up to 5km 1310 nm Single-mode 
    Electrical GbE SFP Transceiver 
    The following table describes the Prisma branded electrical GbE SFP transceiver 
    available. 
    Part Number Description 
    4006222 GbE SFP copper 
    The following table describes the Cisco branded electrical GbE SFP transceiver 
    available. 
    Part Number Description 
    GLC-T GbE SFP copper 
     
      
    						
    							 
     
    78-4025112-01 Rev H0 255 
     
    E 
    ECM 
    Entitlement Control Messages.  
    ECMG 
    Entitlement Control Message Generator.  
    EIS 
    Event Information Scheduler.  
    EMM 
    Entitlement Management Messages.  
    ES 
    Elementary Stream.  F 
    FTP 
    File Transfer Protocol. Allows users to transfer text and binary files to and from a personal 
    computer, list directories on the foreign host, delete and rename files on the foreign host, and 
    perform wildcard transfers between hosts.  G 
    GUI 
    graphical user interface. A program interface that takes advantage of a computer graphics 
    capabilities to make the program visually easier to use.  H 
    HTML 
    Hypertext Markup Language.  
    HTTP 
    Hypertext Transfer Protocol.  I 
    IP 
    Internet Protocol. A standard that was originally developed by the United States Department 
    Glossary  
    						
    							 
    Glossary 
     
    256 78-4025112-01 Rev H0 
    of Defense to support the internetworking of dissimilar computers across a network.  IP is 
    perhaps the most important of the protocols on which the Internet is based. It is the standard 
    that describes software that keeps track of the internetwork addresses for different nodes, 
    routes, and outgoing/incoming messages on a network. Some examples of IP applications 
    include email, chat, and web browsers.  
    IP address 
    Internet protocol address. A 32-bit sequence of numbers used for routing IP data. Each IP 
    address identifies a specific component on a specific network. The address contains a network 
    address identifier and a host identifier.  
    ISO 
    International Organization for Standardization. An international body that defines global 
    standards for electronic and other industries.  P 
    PC 
    personal computer.  Q 
    QAM 
    quadrature amplitude modulation. An amplitude and phase modulation technique for 
    representing digital information and transmitting that data with minimal bandwidth. Both 
    phase and amplitude of carrier waves are altered to represent the binary code. By 
    manipulating two factors, more discrete digital states are possible and therefore larger binary 
    schemes can be represented.  R 
    RADIUS 
    Remote Authentication Dial-In User Service. A networking protocol that provides centralized 
    Authentication, Authorization and Accounting (AAA) management for computers to connect 
    and use a network service.  
    RF 
    radio frequency. The frequency in the portion of the electromagnetic spectrum that is above 
    the audio frequencies and below the infrared frequencies, used in radio transmission systems.  
    RMA 
    return material authorization. A form used to return products.  
    RPU 
    Remote Provisioning Utility.   
    						
    All Cisco manuals Comments (0)

    Related Manuals for Cisco Rfgw1d Manual