Christie Projector Mirage WU-L User Manual

D-46Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
(PIP) PICTURE IN PICTURE 
CONTROL GROUP: Preference     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
This control enables or disables the picture-in-picture (PIP) mode. When this control is enabled for the first time, 
the first valid video signal starting at Slot 1, Input 1 is routed to the PIP window. If no signals are present, the first 
available Slot/Input combination is selected. 
PIP and...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-47020-100774-01 Rev. 2 (4/2012)
(PPA) POSITION PRESET ASPECT 
CONTROL GROUP: Preference     SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
When enabled, this control ensures that during auto setup for any source, its aspect ratio is maintained when its 
default size is calculated. This is similar to cases where a stretch is defined for a source in the lookup table. If 
disabled and no stretch is defined, the source is scaled...

D-48Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
(PRT) SERIAL PORT
CONTROL GROUP: Preference    SUBCLASS: Power Down           ACCESS LEVEL: Status
DESCRIPTION
Gets the current serial port being used, or gets a list of all serial ports available on the device.
SUBCODE
 
DESCRIPTION OF USE
EXAMPLES:
(PRT ?) - Gets current serial port.
(PRT ?L) - Gets list of ports. 
(PTL) SERIAL PROTOCOL
CONTROL GROUP: Preference     SUBCLASS: Power Down           ACCESS LEVEL:...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-49020-100774-01 Rev. 2 (4/2012)
(PWR) POWER 
CONTROL GROUP: Unsaved     SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
Change the power state of the projector.
Possible values:
0 - Power-OFF
1 - Power-ON
10 - Cooldown lamp is cooling down, controlled by lamp (Read-only)
11 - Warmup lamp is warming up, controlled by lamp (Read-only)
SUBCODE
 
DESCRIPTION OF USE
Get or Set the power state of the projector. 
EXAMPLES:
(PWR?) -...

D-50Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
(PXT) PIXEL TRACKING 
CONTROL GROUP: Input     SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
Pixel Tracking adjusts the position of the pixel sampling clock to match the Input signal. It can only be set on 
Analog Input cards. If adjusted incorrectly, flickering or vertical bars of noise appear across the image. Adjust 
Pixel Tracking so that the noise either disappears or fills the image. If...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-51020-100774-01 Rev. 2 (4/2012)
(RBL) RIGHT BLANKING 
CONTROL GROUP: Input     SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
Set the number of lines to blank (turn to black) at the right of the image. This can be used to blank out any 
unwanted data near the right edge of the image. 
A positive amount of blanking makes the image smaller. A negative amount of blanking makes the image larger. 
Negative blanking is only...

D-52Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
EXAMPLES:
(RDB 128) - Set red black level to 128 on main video. 
(RDB+MAIN 128) - Set red black level to 128 on main video. 
(RDB+PIIP 100) - Set red black level to 100 on PIP video. 
(RDB+IN32 100) - Set red black level to 100 on Slot 3, Input 2. 
(RDB?) - Returns the current red black level value on main video. 
(RDB+PIIP ?) - Returns the current red black level value on PIP video. 
(RDB+IN12 ?) - Returns the...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-53020-100774-01 Rev. 2 (4/2012)
SUBCODE
CLRM
DESCRIPTION OF USE
Color Mode. Selects:
1 = Native                     4 = User preset 2
2 = EBU                        5 = User preset 3
3 = User preset 1           6 = User preset 4
ROFR Red part of red (0-255)
GOFR Green part of red (0-255)
BOFR Blue part of red (0-255)
ROFG Red part of green (0-255)
GOFG Green part of green (0-255)
BOFG Blue part of green (0-255)
ROFB Red part of blue (0-255)...

D-54Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
EXAMPLE:
(ROG+SL10 -10) - Set a red gain offset to -10 on Slot 1. 
(ROO) RED ODD PIXEL OFFSET 
CONTROL GROUP: Option     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Adds an offset to Input red black level settings on the analog Input card. It is used to compensate for differences 
between the A to D converter used to sample even pixels, and the one used for odd pixels. A value of 0 is the null...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-55020-100774-01 Rev. 2 (4/2012)
Daily Occurring Event:
(RTE T YYYY/MM/DD HH:MM:SS YYYY/MM/DD D R description command)
Where the first date and time is the start date and occurrence time. The second date is the end date.
R is the Repeat Every interval i.e. repeat every R days 
Weekly Occurring Event:
(RTE T YYYY/MM/DD HH:MM:SS YYYY/MM/DD W R D description command)
Where the first date and time is the start date and occurrence time. The second...