Christie Projector Mirage WU-L User Manual

D-36Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
(LBL) LEFT BLANKING 
CONTROL GROUP: Input     SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
Set the number of lines to blank (turn to black) at the left of the image. This can be used to blank out any unwanted 
data near the left edge of the image. 
A positive amount of blanking makes the image smaller. A negative amount of blanking makes the image larger. 
Negative blanking is only applicable...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-37020-100774-01 Rev. 2 (4/2012)
(LDV) LEVEL DETECTOR VALUE 
CONTROL GROUP: Unsaved     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
The Level Value control specifies the value to be used by the level detector. The range is 1-1023. This control 
takes place before the scaler/deinterlacer. 
SUBCODE
 
DESCRIPTION OF USE
EXAMPLE:
(LDV 500) - Set level detector to 500. All data greater than or equal to 500 will be shown in the...

D-38Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
EXAMPLES:
(LSH 1) - Turn OFF the LEDs.
(LSH ?) - Report current logical shutter setting.
(MCS) MENU CASCADING ENABLE 
CONTROL GROUP: Preference    SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
Enable or disable cascading menus. When disabled, a single menu level will be displayed at a time. 
SUBCODE
 
DESCRIPTION OF USE
Enable or disable cascading.
EXAMPLES:
(MCS ?) - Get the current state of...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-39020-100774-01 Rev. 2 (4/2012)
EXAMPLES: 
(MFT ?) - Get current font option used by the OSD. 0 is small font, 1 is large font. 
(MFT 1) - Use large font as the OSD font.
(MLK) CHANNEL MEMORY LOCK 
CONTROL GROUP: Channel     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Lock a channel from being edited. 
SUBCODE
C0xx
DESCRIPTION OF USE
Lock channel (xx=channel number from 01 to 99).
MAIN  Lock the channel being used by main....

D-40Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
SUBCODE
 
DESCRIPTION OF USE
View/change the current state of the OSD (0=presentation, 
1=main, 2=submenu).
EXAMPLE:
(MNU?)(MNU!0) 
(MSH) MENU SHIFT HORIZONTAL 
CONTROL GROUP: Preference     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Change the horizontal position of the main menu. If the position is not from one of the preset positions, MSP will 
be changed to Custom. 
SUBCODE
 
DESCRIPTION...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-41020-100774-01 Rev. 2 (4/2012)
(NAM) CHANNEL NAME 
CONTROL GROUP: Channel     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Channel Name is optional text assigned to a channel and can appear in the Channel Setup menu, Channel Edit 
menu, the channel list and the Status menu. 
SUBCODE
C0xx
DESCRIPTION OF USE
Set the channel name for the channel (xx=channel number 
from 01 to 99). 
MAIN Set the channel name for the channel...

D-42Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
EXAMPLES:
(NET+ETH0 192.168.1.35) - Set new IP address on the first ethernet controller. 
(NET+GATE 192.168.0.1) - Set the gateway. 
(NET+SUB0 255.255.255.0) - Set the subnet mask on the first ethernet controller. 
(NET+HOST MyHostName) - Set the host name. 
(NET+DOMA MyDomainName) - Set the domain name. 
(NET+ETH0 ?) - Get IP address from first controller. (NET+ETH0! 192.168.1.35). 
(NET+ETH1 ?) - Get IP address...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-43020-100774-01 Rev. 2 (4/2012)
(NTR) NETWORK ROUTING 
CONTROL GROUP: Preference     SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
Set routing for ASCII messages. 
SUBCODE
 
DESCRIPTION OF USE
Used to enable or disable daisy chaining.
0 = RS-232, RS-422 & Ethernet communications are all 
separate from one another
1 = RS-422 port(s) is/are connected to the RS-232 network
2 = The Ethernet port is connected to the RS-232...

D-44Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
(OST) OSD TRANSPARENCY 
CONTROL GROUP: Preference     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Enable or Disable on screen display transparency. 
SUBCODE
 
DESCRIPTION OF USE
Enable/Disable OSD transparency.
EXAMPLE:
(OST 1) - Enable OSD transparency. 
(PBC) PIP BORDER COLOR 
CONTROL GROUP: Preference     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
This control lets you...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-45020-100774-01 Rev. 2 (4/2012)
(PDT) PEAK DETECTOR 
CONTROL GROUP: Unsaved     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Enables or disables the peak detector test mode. This is used to aid in setup of Input levels. For each color, pixel 
values very near black will be displayed black, pixel values very near peak level will be displayed full on. All 
others will be displayed in mid-level grey. Input levels for each color...