Christie Projector Mirage WU-L User Manual

D-26Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
0 = OFF 
1 = HDTV-High Bandwidth 2 = HDTV 
3 = EDTV 
4 = SDTV 
SUBCODE
INxy
DESCRIPTION OF USE
Set the filter for Slot x, Input y.
MAIN Set the filter for Main video.
PIIP Set the filter for PIP video
. 
EXAMPLES:
(FIL 2) - Set the filter for main video to HDTV. 
(FIL+MAIN 2) - Set the filter for main video to HDTV. 
(FIL+IN32 2) - Set the filter for Slot 3, Input 2 to HDTV. 
(FLE) FRAME LOCK ENABLE 
CONTROL...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-27020-100774-01 Rev. 2 (4/2012)
(FMD) FILM MODE DETECT 
CONTROL GROUP: Input     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Enable or disable film motion detection. This is only available for interlaced or segmented frame sources. Valid 
values are: 
0 = Disabled 
1 = Auto 
2 = PsF
SUBCODE
INxy
DESCRIPTION OF USE
Set the film mode detect for Slot x, Input y.
MAIN  Set the film mode detect for Main video. 
PIIP Set the film...

D-28Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
EXAMPLES:
(FRF 5000) - Set free run frequency to 50 Hz. 
(FRF ?) - Get free run frequency. 
(FRZ) FREEZE IMAGE 
CONTROL GROUP: Unsaved     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Freeze the display image. This allows a detailed examination of a single frame of an otherwise moving image. 
Switching channels/Inputs automatically switches the projector to unfrozen.
SUBCODE
MAIN
DESCRIPTION OF...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-29020-100774-01 Rev. 2 (4/2012)
SUBCODE
SLxy
DESCRIPTION OF USE
Set the Input signal grounding method for the specified Slot 
and Input
.
EXAMPLES:
(GIA+SL31 1) - Set grounding on Slot 3, Input 1 to single-ended. 
(GIA+SL11 ?) - Returns the current grounding method of Slot 1, Input 1. 
(GID) VIDEO DECODER GROUNDED INPUT SELECTION 
CONTROL GROUP: Option     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Set the Input signal...

D-30Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
(GMS) VDIC GROUPED-INPUTS MODE 
CONTROL GROUP: Option     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Allows users to select a mode to group the last 3 BNC connectors (Input 4/5/6) on a Video Decoder Input Card. 
valid options are: 
0 = 3 CVBS sources 
1 = 1 SVideo Source + 1 CVBS source 
2 = 1 YPrPb (Component) source 
SUBCODE
SLx0
DESCRIPTION OF USE
Set a grouping mode for the last 3 BNC...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-31020-100774-01 Rev. 2 (4/2012)
(GND) GREEN DRIVE 
CONTROL GROUP: Input     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
The green drive level is used to compensate for different amounts of attenuation between the Red, Green and Blue 
in the signal. Available on all cards expect the Video decoder. 
The correct setting achieves maximum contrast without crushing white or black. When the drive and black level 
controls are set...

D-32Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
(GOO) GREEN ODD PIXEL OFFSET 
CONTROL GROUP: Option     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Adds an offset to Input green black level settings on the analog Input card. It is used to compensate for differences 
between the A to D converter used to sample even pixels, and the one used for odd pixels. A value of 0 is the null 
position in which both A to D converters are set to exactly...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-33020-100774-01 Rev. 2 (4/2012)
(HLT) PROJECTOR HEALTH 
CONTROL GROUP: Unsaved     SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
Any system health errors are placed on the troubleshooting queue. The queue, which contains the problems and a 
suggested solution for each one, is read-only. All problems in the queue are read using their index number, which 
starts from 0.
Problems are assigned priorities:
1 = Critical - Will...

D-34Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
SUBCODE
C0xx
DESCRIPTION OF USE
Toggle In Menu for channel (xx=channel number from 01 to 
99). 
MAIN Toggle In Menu for the channel being used by main
. 
PIIP Toggle In Menu for the channel being used by PIP. 
EXAMPLES:
(INM?) - Get channel in-menu state for channel used by main. 
(INM+MAIN?) - Get channel in-menu state for channel used by main. 
(INM+PIIP?) - Get channel in-menu state for channel used by PIP....

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-35020-100774-01 Rev. 2 (4/2012)
(KCO) KEYSTONE CURSOR OFFSET 
CONTROL GROUP: Preference     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
This control offsets the 2D Keystone cursors from the edge of the image to allow manipulation of keystone on an 
overshot display.
SUBCODE
KCOT
DESCRIPTION OF USE
Adjusts top offset.
KCOBAdjusts bottom offset.
KCOLAdjusts left offset.
KCORAdjusts right offset.
EXAMPLES:
(KCO+KCOT 25) -...