Christie Projector Mirage WU-L User Manual

D-56Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
Delete All Events:
(RTE X *)
Delete a single event:
(RTE X A), where A is the event to be deleted (0-??)
SUBCODE

DESCRIPTION OF USE
EXAMPLE:
Single Occurrence Events:
(RTE T 2008/12/25 11:48:00 S description (LSH 1)) - close the shutter at 11:48:00 on December 25, 2008 
(RTE T 2009/01/01 23:00:00 S description (CHA 2)) - switch to channel 2 on January 1, 2009 at 23:00:00
Daily Occurring Event:
(RTE T 2009/01/01...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-57020-100774-01 Rev. 2 (4/2012)
DMX Events:
(RTE M 55 description (LSH 0)) - open the shutter when the DMX channel 55 is moved into the range of 192-
255 
(RTE M 56 description (LSH 1)) - close the shutter when the DMX channel 56 is moved into the range of 192-
255 
System Events:
(RTE S 1 1 description (CLE 5)) - change color to cyan when system powers up 
(RTE S 3 description (IRS 2)(DIM 2)) - change dynamic iris to per channel mode and turn...

D-58Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
(SIZ) SIZE 
CONTROL GROUP: Input     SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
This controls how much the projector will electronically expand or shrink the image. It will expand/contract the 
image in both the vertical and horizontal directions so that the aspect ratio will not change. 1000 is the neutral 
position where no resizing is done. Scale = value / 1000. The horizontal scaling of...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-59020-100774-01 Rev. 2 (4/2012)
(SOR) SCREEN ORIENTATION 
CONTROL GROUP: Preference     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Selects the orientation of the displayed image. It can be displayed normally, inverted horizontally, inverted 
vertically, or inverted in both directions, as required by the projector installation. Valid values are: 
0 = Front Projection 
1 = Rear Projection 
2 = Front Projection Inverted 
3 =...

D-60Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
(SPT) SPLIT SCREEN 
CONTROL GROUP: Unsaved     SUBCLASS: Power Down           ACCESS LEVEL: Status
DESCRIPTION
Split screen enable control. Allows a snap shot of the main image to be presented on the right side of the screen to 
allow evaluation of advanced image processing features. All resizing controls are honoured on both images. 
However, image processing controls only happen on the left side image. Changing...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-61020-100774-01 Rev. 2 (4/2012)
(STD) VIDEO STANDARD 
CONTROL GROUP: Input     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
This control displays or sets the current video standard that is decoding the Input signal. 
You can allow the projector to automatically determine the standard or you can specify a specific standard from 
the selection list. 
0 = Auto. Automatically determined by decoder. 
1 = PAL is a commonly used...

D-62Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
EXAMPLES:
(SZP 1) - Set the size preset to no resizing. 
(TBL) TOP BLANKING 
CONTROL GROUP: Input     SUBCLASS: Power Down           ACCESS LEVEL: Operator
DESCRIPTION
Set the number of lines to blank (turn to black) at the top of the image. This can be used to blank out any unwanted 
data near the top edge of the image. 
A positive amount of blanking makes the image smaller. A negative amount of blanking makes...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-63020-100774-01 Rev. 2 (4/2012)
1User 1
2User 2
3User 3
4User 4
C Alias to selected table
SUBCODE
SLCT
DESCRIPTION OF USE
 Selects the color space preset:
0 = Max drives (M)                4 = Factory (F)
1 = EBU (E)                           5 = User 1 (1)
2 = SD Video (S)                    6 = User 2 (2)
3 = HD Video (H)                   7 = User 3 (3)
                                                8 = User 4 (4)
RDxXAdjusts the x...

D-64Mirage WU-L User Manual020-100774-01 Rev. 2 4-2012
Appendix D: Serial Command Reference
(TED) TWIN HDMI EDID TYPE SELECTION 
CONTROL GROUP: Option     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Set the preferred EDID Timings on the Twin HDMI Input card. Available Models are:
0 = Default
1 = 3D
2 = Custom  
NOTE: 3D option (1) is not supported for Entero or Matrix StIM/SIM.
SUBCODE
SLxy
DESCRIPTION OF USE
Set the EDID timings on Slot x to the specified type.
EXAMPLES:
(TED+SL31 2)...

Appendix D: Serial Command Reference
Mirage WU-L User ManualD-65020-100774-01 Rev. 2 (4/2012)
TIMESet the local time in the form hh:mm:ss 
NOTE: Time must be set using a 24-hour clock (regardless of 
LOC+TIME setting).
EXAMPLES: 
(TMD+TIME 17:50:45) - Set new local time. 
(TMD+DATE 2007/02/30) - Set the local date. 
(TMD+TIME?) - Get local time (TMD+TIME! 17:50:45). 
(TNT) TINT 
CONTROL GROUP: Input     SUBCLASS: Power Up           ACCESS LEVEL: Operator
DESCRIPTION
Tint adjusts the balance of...