Christie Projector Mirage M Series User Manual

Section 3: Operation
Mirage M Series User Manual3-63020-100575-02  Rev. 1  (11-2010)
FIGURE 3-47   EXAMPLE OF 3D MULTIPLE DISPLAY SETUP 

Mirage M Series User Manual4-1020-100575-02  Rev. 1   11-2010
4 Web User Interface
4.1 Logging On
IMPORTANT!  Before logging on to the system, ensure that you select the appropriate language 
required. Your language selection only affects the web user interface. The language used by the 
projector’s on-screen display (OSD) is not affected. See Figure 4-1. 
1. Open your web browser and type the IP address (in the address bar) assigned to your projector.
2. Select the appropriate language from the Language...

4-2Mirage M Series User Manual020-100575-02  Rev. 1   11-2010
Section 4: Web User Interface
The following table describes each area found in the Main window. See Figure 4-3.
4.2 Navigating the Web User Interface
It is not recommended that you use the web browser’s navigation functionality (i.e. the Back and Forward 
functions) as this will cause you to lose your web connection. It is recommended that you navigate using the 
application interface and related functionality detailed in this section....

Section 4: Web User Interface
Mirage M Series User Manual4-3020-100575-02  Rev. 1  (11/2010)
4.3 Basic Operation
This section discusses the primary tabs located along the top of the application window. Each primary tab also 
has related secondary tabs which are located along the bottom of each tabbed page as follows:
• Main
• General
• Status
• Lens
• Tools
• Virtual OSD
• Admin
• System
• Users
• Advanced
•RTE
• Serial
• About
• Version
• License
4.3.1 Main Tabbed Page - General
Under the Main tabbed...

4-4Mirage M Series User Manual020-100575-02  Rev. 1   11-2010
Section 4: Web User Interface
4.3.3 Main Tabbed Page - Lens 
Under the Main tabbed page, select the Lens secondary tab to define your adjustment settings for the lens. For 
detailed information, refer to Section 3 Operation.
4.3.4 Tools Tabbed Page - Virtual OSD 
Under the Tools tabbed page, select the Virtual OSD secondary tab to access to the virtual OSD page. See 
Figure 4-6.
FIGURE 4-6 TOOLS WINDOW
 The following table describes each area...

Section 4: Web User Interface
Mirage M Series User Manual4-5020-100575-02  Rev. 1  (11/2010)
Virtual OSD Menu
By selecting an option from a menu, its associated window 
appears, showing related information and input fields. To 
return to the previous menu, click the menu’s title bar (see 
Figure 4-7). 
To return to a previous menu, click on the current menu’s 
title bar or press ESC. 
NOTE: It is recommended to click the 
Maximize button to view the full screen size.
There are various types of menu...

4-6Mirage M Series User Manual020-100575-02  Rev. 1   11-2010
Section 4: Web User Interface
SELECTING A OPTION FROM A DROP-DOWN LIST
1. Click the option drop-down arrow to open the drop-down list. 
2. Locate and select the desired option.
FIGURE 4-9 TYPES OF MENU ELEMENTS
SELECTING OR CLEARING A CHECK BOX
To select or clear a check box, click the check box with your mouse pointer. This enables or clears the option 
respectively.
C
LOCK SETTING
1. Click within the field (i.e. Lamp Regeneration Start Time...

Section 4: Web User Interface
Mirage M Series User Manual4-7020-100575-02  Rev. 1  (11/2010)
The following table describes each area found in the Admin window. See Figure 4-10.
Uploading a Logo File or Gamma File
Important: The projector must be powered on to enable the Upload drop-down list.
1. Click the Upload Browse button to open the Choose file window. 
2. Locate and select the file you wish to upload from a Network drive location or from your hard drive. 
3. Select the file type (Logo or Gamma)...

4-8Mirage M Series User Manual020-100575-02  Rev. 1   11-2010
Section 4: Web User Interface
4. Click the Upload button to display the Logo Upload window.
a. Enter a descriptive name in the Display Name field.
b. Click the Upload button to display the Gamma Upload window. Click Yes or No to confirm or cancel 
the upload respectively.
An Upload in Progress window appears. 
Creating a Backup File
1. Select a file type (All, Preferences, Configuration, Channels, or Users) from the Backup drop-down list.
2....