Christie Projector CP2230 User Manual

Operation
CP2230 User Manual5-7020-100430-07 Rev. 1 (05-2014)
Typically, you install top and side masking to allow a greater range of adjustment.
5.8 Display Non-Cinema Content
To display content from standard or high definition non-cinema sources, connect the source to the DVI-D A 
and DVI-D B ports on the input panel. The DVI port  auto-detects progressive scan and digital RGB sources 
and displays them in their original  format. Using two DVI ports as a high er-bandwidth dual-link or twin-link 
pair...

CP2230 User Manual6-1020-100430-07 Rev. 1 (05-2014)
6 Cinema Projector Menus
This section provides information and procedures for using cinema projector menus. You can use cinema 
projector menus to adjust cinema projector settings and view status information. 
6.1 The Touch Panel Controller (TPC)
The TPC is a touch-sensitive screen that you use to cont rol the cinema projector. You can use the TPC to turn 
the cinema projector and lamp on or off, select channels, and view status informa tion. The TPC is...

6-2CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Cinema Projector Menus
6.2 Main Screen
Use the Main screen of the Touch Panel Controller (TPC) to access power, lamp, douser, auxiliary lens, lens 
adjust, and test pattern settings . You can also select channels.
Table 6.1 Main Panel
ControlDescription
1: Title Bar *
Status LED
Status Error Message Displays a green, yellow, 
or red LED. A green LED i ndicates that the cinema 
projector is operating properly. If a mo nitored system falls below a normal...

Cinema Projector Menus
CP2230 User Manual6-3020-100430-07 Rev. 1 (05-2014)
3: All Channels ButtonDisplays 64 saved channels.
4: Power
Power OFF           Power ON Turns the cinema projector on or off. Pres
s off to place the cinema projector in 
stand-by mode. To prevent ac cidental activation, you must press and hold the on 
or off buttons. A message displays in the title bar when the cinema projector 
turns on or off.
5: Lamp
Lamp OFF             Lamp ON  Turns the lamp on or off. To prevent ac...

6-4CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Cinema Projector Menus
6.3 Open the On Screen Keyboard
Ta p  t h e  Launch Dialog button ( ) to open the On Screen Keyboard. The Onscreen Keypad is only 
available when you need to enter numerical values.
11: Status Bar  *
Menu Button
Status
Select Test Pattern  The 
Menu button is the starting point to the user windows. Tapping this button 
opens a 2 layer menu system populated  with available windows based on your 
permission level. The bottom right...

Cinema Projector Menus
CP2230 User Manual6-5020-100430-07 Rev. 1 (05-2014)
6.4 User Access and Rights 
This table lists the Touch Panel Controller (TPC) permissions:
Table 6.2 User Levels
Table 6.3 Accessible Windows per User Level
Permission LevelDescription
StatusAny user can view basic cinema  projector status, diagnostic information and software version 
information. This is the default le vel for Serial Communication sessions.
OperatorThis level of user can activate channels and test pa tterns, view...

6-6CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Cinema Projector Menus
6.5 Status Window
You use the Status window to view cinema projector status information. To view the Status window, tap Menu 
>  Status .
The right pane displays a list of cinema projector  items and their status. The left pane provides detailed 
information about individual  cinema projector items. 
A green LED indicates the item is fu nctioning correctly. A yellow LED is  a warning that a cinema projector 
item requires...

Cinema Projector Menus
CP2230 User Manual6-7020-100430-07 Rev. 1 (05-2014)
If the Item or Va l u e  descriptions are too long for the cell, clic k the description to view the full description at 
the bottom of the window. To adjust the width of a column  in the left pane, click and drag the column border. 
When you close the Status window, the colu mn widths return to their default size.
 Figure 6-3 Status Window 

6-8CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Cinema Projector Menus
Table 6.4 Summary of Status: System Components
All
Displays all the status items that are in 
alarm state.
Cooling
Cooling Pump
Card Cage Fanpack (bottom right)
Card Cage Fanpack (top right)
Intake Fanpack (bottom right)
Intake Fanpack (bottom left)
Intake Fanpack (top right)
Intake Fanpack (top left)
LAD Fan
Radiator
Card Cage Exhaust (Operator side)
Card Cage Exhaust  (Non-Operator side)
Lamp Power Supply Fan
Temperatures...