Christie Projector CP2230 User Manual

							CP2230
User Manual
020-100430-07 
						

							CP2230
USER MANUAL
020-100430-07 
						

							NOTICES 
COPYRIGHT AND TRADEMARKS 
Copyright ©2014 Christie Digital Systems USA, Inc. All rights reserved.
All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.
REGULATORY
The product has been tested and found to comply with the limi ts for a Class A digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to p rovide reasonable protection against harm ful interference when the product is 
operated in a commercial environment. The product generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction manu al, may cause harmful interference to radio communications. 
Operation of the product in a residential area is likely to caus e harmful interference in which case the user will be required 
to correct the interference at the user’s own expense.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à  la norme NMB-003 du Canada.
이  기기는  업무용(A급)으로  전자파적합등록을  한  기기이오니  판매자  또는  사용자는  이점을  주의하시기  바라며 , 가정  외의  지역에
서  사용하는  것을  목적으로  합니다 .
GENERAL
Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur 
which may not be reflected in this docume nt.  Christie reserves the right to make changes to specifications at any time 
without notice.  Performance specifications are typical, but  may vary depending on conditions beyond Christie's control 
such as maintenance of the product in proper working condit ions.  Performance specifications are based on information 
available at the time of printing.  Christie makes no warranty  of any kind with regard to this material, including, but not 
limited to, implied warranties of  fitness for a particular purpose. Christie will  not be liable for errors contained herein or for 
incidental or consequential damages in connection  with the performance or use of this material.
The product is designed and manufactured with high-quality materials and components that can be recycled and reused.  
This symbol   means that electrical and electronic equipment,  at their end-of-life, should be disposed of separately from 
regular waste. Please dispose of  the product appropriately and according to local  regulations.  In the European Union, there 
are separate collection systems for used electrical and electron ic products.  Please help us to conserve the environment we 
live in!
Canadian manufacturing facilit y is ISO 9001 and 14001 certified.
GENERAL WARRANTY STATEMENTS
For complete information about Christie’s  limited warranty, please contact your Christie dealer.  In addition to the other 
limitations that may be specified in Christie’s  limited warranty, the warranty does not cover:
a. Damage occurring during shipment, in either direction. b. Cinema projector lamps (See Christie’s separate lamp program policy).
c. Damage caused by use of a cinema projector lamp beyond  the recommended lamp life, or use of a lamp supplied by a 
supplier other than Christie.
d. Problems caused by combination of the product with non-Christie equipment, such as distribution systems, cameras,  video tape recorders, etc., or use of the prod uct with any non-Christie interface device.
e. Damage caused by misuse, improper power source, accident, fire, flood, lightning, earthquake or other natural 
di
 saster.
f. Damage caused by improper  installation/alignment, or by product modificati on, if by other than a Christie authorized 
repair service provider.
g. For LCD projectors, the warranty period specified applies  only where the LCD projector is in “normal use.” “Normal 
use” means the LCD projector is not used more than 8  hours a day, 5 days a week. For any LCD projector where 
“normal use” is exceeded, warranty coverage under this warranty termin ates after 6000 hours of operation.
h. Failure due to normal wear and tear.
PREVENTATIVE MAINTENANCE
Preventative maintenance is an important part of the contin ued and proper operation of your product. Please see the 
Maintenance section for specific maintenance items as they relate to your product.  Failure to perform maintenance as 
required, and in accordance with th e maintenance schedule specified by Christie, will void the warranty. 
						

							       Table of Contents
CP2230 User Manuali020-100430-07 Rev. 1 (05-2014)
1: Introduction
1.1 Labels and Markings ........................................................................\
........................................... 1-1
1.2 General Precautions ........................................................................................................ ............. 1-1
1.3 Power Warnings ........................................................................\
..................................... ............. 1-2
1.3.1 Power Cords and Attachments........................................................................\
..................... 1 -2
1.4 Lamp Preca utions ........................................................................\
................................... ............. 1-2
1.5 Contacting Your  Dealer ........................................................................\
............................. .......... 1-3
2: Installation and Setup
2.1 Site Requirements ........................................................................\
.................................. .............. 2-1
2.2 Tools Required fo r Installation ........................................................................\
.................... ........ 2-1
2.3 Cinema Projector  Components ........................................................................\
........................ .... 2-2
2.4 Installation Safety and Warning Guidelines ........................................................................\
........ 2 -4
2.5 Position the Cinema  Projector ........................................................................\
...................... ....... 2-5
2.6 Adjust Tilt and Level th e Cinema Projector ........................................................................\
........ 2 -7
2.7 Install the Touch Pa nel Controller ........................................................................\
................. ...... 2-8
2.8 Connect External E xhaust Ducting........................................................................\
................... ... 2-8
2.8.1 Determine the cinema projector  Exhaust CFM Value ......................................................... 2-9
2.9 Install the Primary Lens........................................................................\
........................... ............ 2-10
2.10 Install the Optional  Anamorphic Lens........................................................................\
.............. .2-10
2.11 Install the Optional Wide Converter Lens ........................................................................\
......... 2 -11
2.12 Install the Lamp ........................................................................\
.................................. ............... 2-11
2.13 Connect the Lamp Power Supply (LPS)........................................................................\
............ 2-1 2
2.14 Connect the Cinema Projector to  an Optional Uninterrupted Power 
Supply ........................................................................\
................................................. ....................... 2-15
2.15 Connect Sources and Turn the  Cinema Projector On ................................................................ 2-16
3: Connect Devices to the cinema projector
3.1 Connect a Communica tions Device ........................................................................\
.................... 3-2
3.2 Connect Devices to  the SCCI Port ........................................................................\
................... ... 3-3
3.3 Connect Devices to  the GPIO Port ........................................................................\
................... ... 3-4
3.4 Connect Devices to th e 3D Connector ........................................................................\
................ 3-6
4: Adjust the Image
4.1 Maximize Light Output ........................................................................\
.............................. ......... 4-1
4.2 Calibrate Screen  Brightness (fL) ........................................................................\
................... ...... 4-1
4.3 Basic Image Alignment ........................................................................\
.............................. ......... 4-1
4.4 Adjust Of fset........................................................................\
...................................... .................. 4-2
4.5 Adjust Offset with an ILS........................................................................\
.......................... .......... 4-2
4.6 Adjust Left and Right Bore sight........................................................................\
.................... ...... 4-2
4.7 Adjust Top and Bott om Boresight ........................................................................\
.................... ... 4-4
4.8 Adjust Top and Bottom Bore sight with an ILS ........................................................................\
... 4-5
4.9 Adjust DMD C onvergence ........................................................................\
............................. ..... 4-5
4.10  Fold Mirror Adjustment........................................................................\
........................... ......... 4-6
4.11 Calibrate the System

........................................................................\
.............................. ............ 4-7 
						

							iiCP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Table of Contents
4.12  Color Calibration ........................................................................\
................................ ..............4-7
4.13 
 Electronic Screen  Masking ........................................................................\
.............................. .4-7
4.14 Work with 3D ........................................................................\
...................................... ..............4-7
4.14.1 Display Requirements ........................................................................\
............................ ....4-7
4.14.2 Hardware Setup ........................................................................\
.................................. ........4-8
4.14.3 Install a 3D Server with an YCxCz Interface ....................................................................4-8
4.14.4 Edit the Default 3D Lamp File ........................................................................\
................... 4-9
4.14.5 Define a Measured Color Gamut Data File .......................................................................4-9
4.14.6 Edit the 3D Flat 1998 x 1080 Channel ........................................................................\
.......4-9
4.14.7 Edit the 3D Scope 2048 x 858 Channel ........................................................................\
.....4-10
4.14.8 Display 3D Diagnostic Test Patterns ........................................................................\
.........4-10
4.14.9 Verify 3D Cine ma Content ........................................................................\
........................ 4-14
4.14.10 3D Troubles hooting ........................................................................\
.................................4-14
5: Operation
5.1 Turn the Cinema Projector On ........................................................................\
....................... ......5-1
5.2 Turn the Cinema Projector Off ........................................................................\
...................... ......5-1
5.3 Cinema Projector  Power States........................................................................\
...................... ......5-1
5.4 Cinema Projector LED  Status Indicators ........................................................................\
............. 5-2
5.5 Work with the Lamp ........................................................................\
................................. ...........5-2
5.5.1 Adjust Lamp Power ........................................................................\
................................ .....5-2
5.5.2 Change the Lamp Power Percentage ........................................................................\
...........5-2
5.5.3 Use LampLOC™ to Adjust  the Lamp Position ...................................................................5-2
5.5.4 Manually Adjust the Lamp Position ........................................................................\
............5-3
5.5.5 View Lamp Information........................................................................\
............................ ...5-3
5.5.6 Receive an Alarm when a Lamp  Reaches Its Expiry Date ..................................................5-3
5.5.7 Receive an Alarm when a Lamp  Needs to be Rotated .........................................................5-3
5.5.8 Lamp Expiry Hours........................................................................\
................................ ......5-4
5.5.9 Minimum and Maximum Lamp Power Ratings ..................................................................5-4
5.6 Work with Lenses ........................................................................\
................................... .............5-5
5.7 Present Movies ........................................................................\
..................................... ................5-6
5.7.1 Connect Sources........................................................................\
.................................. .........5-6
5.7.2 Use an Anamorphic Lens ........................................................................\
........................... ..5-6
5.7.3 Use a Wide Conve rter Lens ........................................................................\
........................ .5-6
5.7.4 Masking........................................................................\
.......................................... ..............5-6
5.8 Display Non-Cinema Content ........................................................................\
..............................5-7 5.8.1  Select a  Source ........................................................................\
................................. ...........5-7
6: Cinema Projector Menus
6.1 The Touch Panel Controller (TPC) ........................................................................\
................... ...6-1
6.2 Main Screen ........................................................................\
........................................ .................6-2
6.3 Open the On Screen Keyboard ........................................................................\
........................ ....6-4
6.4 User Access and Rights ..................................................................................................... ..........6-5
6.5 Status Window ........................................................................\
...................................... ...............6-6
6.6 Alarm Window ........................................................................\
....................................... .............6-11 
						

							       Table of Contents
CP2230 User Manualiii020-100430-07 Rev. 1 (05-2014)
6.7 Interrogator Window ........................................................................\
........................................... 6-11
6.8 SMPTE Errors Window........................................................................\
....................................... 6-13
6.9 System Logs Window........................................................................\
................................. ......... 6-14
6.10 Server Test Window ........................................................................\
................................ .......... 6-15
6.11 DLP Management  Window ........................................................................\
............................. .. 6-16
6.12 Network Devices ........................................................................\
................................... ............ 6-17
6.13 Channel Setup Windows ........................................................................\
............................. ...... 6-18
6.13.1 Config 1 Window........................................................................\
................................. ...... 6-19
6.13.2 Config 2 Window........................................................................\
................................. ...... 6-20
6.13.3 3D Control Window........................................................................\
............................... .... 6-21
6.14 Advanced Setup Windows........................................................................\
............................ ..... 6-24
6.14.1 Lamp Power / LiteLOC™ Setup Window............................\
............................................. 6-25
6.14.2 Lamp Histor y Window ........................................................................\
............................. .6-26
6.14.3 LampLOC™ Setup  Window ........................................................................\
..................... 6-27
6.14.4 ILS File Setup Window ........................................................................\
........................... .. 6-29
6.14.5 Lens Setup Window ........................................................................\
............................... .... 6-30
6.14.6 Source File Setup Window ........................................................................\
........................ 6-31
6.14.7 Screen File Se tup Window........................................................................\
........................ 6-32
6.14.8 MCGD File Setup Window ........................................................................\
....................... 6-3 3
6.14.9 TCGD File Setup Window ........................................................................\
........................ 6- 34
6.15  Administrator Se tup Windows........................................................................\
...................... ... 6-35
6.15.1 Preferred Channel  Setup Window ........................................................................\
............. 6-35
6.15.2  Preferred Test Patt ern Setup Window ........................................................................\
...... 6-36
6.15.3 Preferences  Window ........................................................................\
.............................. .... 6-37
6.15.4 Content Devices Confi guration Window........................................................................\
... 6-38
6.15.5 Time Setup  Window ........................................................................\
............................... ... 6-39
6.15.6 Scheduler  Window........................................................................\
..................................... 6-40
6.15.7 Communications Confi guration Window ........................................................................\
.. 6-41
6.15.8 Network Devices Se tup Window........................................................................\
............... 6-42
6.15.9 GPIO Setup Window ........................................................................\
............................... .. 6-43
6.15.10 Foot Lamberts Calibration Window ........................................................................\
........ 6-44
6.15.11 User Accounts  Window ........................................................................\
........................... 6-45
6.15.12 Upgrade Wi ndow ........................................................................\
................................. .... 6-47
6.15.13 System Access Window........................................................................\
........................... 6-48
6.16 Service Set up Windows ........................................................................\
............................. ........ 6-49
6.16.1 File Management Window........................................................................\
......................... 6 -50
6.16.2 Marriage Wi ndow ........................................................................\
................................. ..... 6-51
6.16.3 Digital Convergen ce Window ........................................................................\
................... 6-5 2
6.16.4 System Acce ss Window........................................................................\
............................ .6-53
6.16.5 IMB Marriage  Window ........................................................................\
............................. 6-54
6.16.6 Lamp Power Supply Setup Window........................................................................\
.......... 6-55
6.17 About Window ........................................................................\
...................................... ............
 6-56
6.18 Help Window........................................................................\
....................................... .............. 6-57
7: Maintenance
7.1 Inspect Ven tilation........................................................................\
................................ ............... 7-1 
						

							ivCP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Table of Contents
7.2 Fill the Coolant Reservoir ........................................................................\
....................................7-1
7.3 Inspect the Lamp ........................................................................\
................................... ...............7-2
7.4 Inspect and Clean Optics ........................................................................\
........................... ..........7-2
7.4.1 Clean the Lens ........................................................................\
................................... ...........7-2
7.4.2 Clean the Lamp Reflector ........................................................................\
......................... ...7-3
7.5 Inspect and Clean th e Lamp Blower ........................................................................\
.................. ..7-3
7.6 Replace the  Lamp ........................................................................\
................................... .............7-3
7.7 Rotate the Lamp ........................................................................\
.................................... ...............7-6
7.8 Replace the Light Engine Air Filter ........................................................................\
................ .....7-6
7.9 Replace the Liquid C ooling Air Filter ........................................................................\
.............. ...7-7
7.10 Replace the  Lens ........................................................................\
.................................. ..............7-7
8: Troubleshooting
8.1 Cinema Projector Do es Not Turn On..........................................................\
................................ .8-1
8.2 Lamp Does Not Ignite........................................................................\
............................... ...........8-1
8.3 Lamp Suddenly  Turns Off ........................................................................\
............................ .......8-2
8.4 Flicker, Shadows,  Or Dimness ........................................................................\
....................... .....8-2
8.5 LampLOC™ Not Working ........................................................................\
..................................8-2
8.6 LiteLOC™ Not Working ........................................................................\
............................... ......8-2
8.7 TPC ........................................................................\
................................................ ......................8-2
8.8 Cannot Establish Communication wi th the Cinema Projector ....................................................8-2
8.9 Blank Screen, No Display  of Cinema Image ........................................................................\
.......8-3
8.10 Severe Motion  Artifacts ........................................................................\
........................... ..........8-3
8.11 Image Appears Vertically  Stretched or ‘Squeezed’ into Center of Screen................................8-3
8.12 No Image, Just Pink Snow ........................................................................\
.......................... .......8-3
8.13 Inaccurate Display Colors ........................................................................\
......................... .........8-3
8.14  Display is Not Rectangular ........................................................................\
....................... ........8-3
8.15  Display is Noisy ........................................................................\
................................. ...............8-4
8.16 Display has Suddenly Frozen ........................................................................\
....................... .....8-4
8.17 Data is Cropped  from Edges ........................................................................\
........................ ......8-4
8.18  The Cinema Projector is On,  but There is No Display .............................................................8-4
8.19  The Display is Jitt ery or Unstable........................................................................\
............... ......8-4
8.20  The Display is Faint ........................................................................\
............................. .............8-5
8.21  The Upper Portion of the Display is  Waving, Tearing, or Jittering..........................................8-5
8.22 Portions of the Displa y are Cut OFF or Warped to the Opposite Edge .....................................8-5
8.23  Display Appears Compressed  (Vertically Stretched) ...............................................................8-5
8.24 Inconsistent Picture Quality ........................................................................\
...................... .........8-5
A:  Specifications 
A.1 Display ........................................................................\
............................................ ....................A-1
A.1.1 Panel Resolution and Refresh Rate ........................................................................\
.............A-1
A.1.2 Achievable Brightness (Measu red at Screen Center)..........................................................A-1
A.1.3 Achievable Contrast Ratio ........................................................................\
........................ ..A-1
A.1.4 Color and Gr ay Scale ........................................................................\
..................................A-1
A.1.5 White Point........................................................................\
...................................... ............A-1