Christie Projector CP2230 User Manual

Adjust the Image
CP2230 User Manual4-13020-100430-07 Rev. 1 (05-2014)
 Figure 4-13 RGB-12bit-3D Half Descending Test Pattern
FRAME 1 - 100% white field with 
last lines 25% white and 75% blackFRAME 2 - 50% white field with 
last line 75% white and 25% black
FRAME 3 - 25% white field with 
last line 25% white and 75% blackFRAME 4 - 12.5% white field with 
last line 75% white and 25% black
 Figure 4-14 RGB-12bit-3D L-Test Pattern
Green field with white “L” and last lines 
25% white, 75% black Magenta field...

4-14CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Adjust the Image
4.14.9 Verify 3D Cinema Content
1. Put on a pair of 3D glasses.
2. Play the 3D content.
3. Verify the left and right eye display correctly. 
4. Put the 3D glasses on upside down. 
5. If the image is reversed:
 a. Tap  Menu > Channel Setup  on the cinema projector Touch Pad Controller (TPC).
 b. Select a 3D channel in the  Channel Name list.
 c. Select  Inverted in the 3D Sync Polarity  list.
4.14.10 3D Troubleshooting
Reversed 3D...

Adjust the Image
CP2230 User Manual4-15020-100430-07 Rev. 1 (05-2014)
Ghosting / Cross-talk
1. Tap Menu >  Channel Setup .
2. Select a 3D channel in the  Channel Name list.
3. Tap  3D Control  in the left pane.
4. Raise or lower the Dark Time  field value.
5. Raise or lower the Output Delay  field value.
Motion Artifacts
1. Tap Menu >  Channel Setup .
2. Select a 3D channel in the  Channel Name list.
3. Tap  3D Control  in the left pane.
4. Select  Left (L1R1 L2R2)  in the L/R Display Sequence  list....

CP2230 User Manual5-1020-100430-07 Rev. 1 (05-2014)
5 Operation
This section provides information and procedures for operating the CP2230 cinema projector.
5.1 Turn the Cinema Projector On
WARNING! Do not attempt to turn the cinema projector on if the AC supply is not within the 
specified voltage range.  
1. Turn the circuit breaker fo r the cinema projector on.
2. On the Touch Panel Controller (TPC), tap and hold the green power   icon.
3. On the TPC, tap and hold  the light bulb   icon to ignite the...

5-2CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Operation
5.4 Cinema Projector LED Status Indicators
Red, yellow, and green LEDs on the top and rear corners of the cinema projector indicate the status of the 
cinema projector. The LEDs can be solid ly lit, or they can flash frequently or intermittently. This table lists the 
LED state and its associated meaning.
Table 5.1 cinema projector Status LED Legend
5.5 Work with the Lamp
This section provides informatio n and procedures for optimizing lamp...

Operation
CP2230 User Manual5-3020-100430-07 Rev. 1 (05-2014)
• Perform a white test pattern. This is recommended to allow you to view LampLOC™ progress on-screen. 
To automatically adjust LampLOC
™:
1. Tap  Menu >  Advanced Setup  > LampLOC™ Setup.
2. Tap  Do Auto . 
5.5.4 Manually Adjust the Lamp Position
1. On the  Main screen of the TPC, tap the test patterns button.
2. Tap  RGB-12bit-Full Screen White .
3. Mount a light meter on a tripod and center it with the lens. The distance from the lens does...

5-4CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Operation
5.5.8 Lamp Expiry Hours
This table lists the maximum hours cinema projector lamps can operate before replacement:
Table 5.2 Lamp Expiry Hours
5.5.9 Minimum and Maximum Lamp Power Ratings 
This table lists the minimum and maximum power settings fo r cinema projector lamps: 
Table 5.3  Minimum and Maxi mum Lamp Power by Lamp Type
* The maximum power of the lamp power supply is restricted to 7000W ± 100W.
Lamp TypeReplace BEFORE
CDXL-20 (2.0 kW)...

Operation
CP2230 User Manual5-5020-100430-07 Rev. 1 (05-2014)
5.6 Work with Lenses
The lens mount secures the primary zoom lens to the cinema projector and provides setup adjustments for 
correct boresight, and manually controlled focus, zoom and offsets. See  6. Adjust optical components if 
required., on page 2-16  for lens installation and boresight instructions. 
The optional Intelligent Lens System (ILS) automates th e process of adjusting the Focus, Horizontal (X) and 
Vertical (Y) Offset, and Zoom...

5-6CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Operation
5.7 Present Movies
This section provides information and procedures for using the cinema projector to present movies. It is 
recommended that you read through th is section in its entirety before displaying movies for the first time. 
Before you display movies for the first tim e, verify that the cinema projector is properly installed, aligned, and 
configured. See
 Section 2 Installation and Setup. 
5.7.1 Connect Sources
Connect a digital...