Christie Projector CP2230 User Manual

Cinema Projector Menus
CP2230 User Manual6-9020-100430-07 Rev. 1 (05-2014)
EVB Main Code - CRC
EVB State
LV P S  A C  O K
LV P S  D C  O K
Lamp Info
Lamp ID
Lamp Serial Number
Lamp Power Lamp power in watts
Lamp Current Lamp current in amps
Lamp Voltage Lamp voltage in volts
Luminance Luminance in Foot Lamberts or Candela
Lamp Intensity Current light intensity reading
Lamp Expired Status Yes/No
Lamp Needs Rotation Yes/No
Total Hours on Installed Lamp Total  number of hours on current lamp
Lamp State...

6-10CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Cinema Projector Menus
PIB LVDS FPGA
PIB FPGA Production
PIB FPGA Factory
PIB Main Production
PIB Main Factory
PIB Bootloader
PIB CPLD
Router Bootloader
Router Kernel
Router Sysfs
LD Security List
LD Software
LD Login List
ICP Software
ICP OS
ICP Kernel
ICP RAM Disk
ICP Software Boot
ICP Firmware Boot
ICP Software Main
ICP Firmware Main
ICP Firmware FPGA Config
ICP Secure Processor
Formatter Software Boot
Formatter Firmware Boot
Formatter Software...

Cinema Projector Menus
CP2230 User Manual6-11020-100430-07 Rev. 1 (05-2014)
6.6 Alarm Window
When an alarm occurs, an Alarms window with a red border appears with a description of the alarm condition, 
state, and time and date of the alarm. The window  only displays alarms you have not previously 
acknowledged. To acknowledge an alarm a nd remove it from the Alarms window, click  Acknowledge. To 
view all alarms, tap  Menu > Status > All Alarms  in the left pane. 
6.7 Interrogator Window
To open the...

6-12CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Cinema Projector Menus
 Figure 6-5 Diagnostics: Interrogator Window 

Cinema Projector Menus
CP2230 User Manual6-13020-100430-07 Rev. 1 (05-2014)
6.8 SMPTE Errors Window
To open the SMPTE Errors window you need Operator, Administrator, or Service permissions. Tap Menu > 
Diagnostics  > SMPTE Errors .
The SMPTE Errors window displays a nu merical representation of the signal integrity of the HD-SDI signals 
sent to the cinema projector on the BNC signal  cables. Click Clear Errors to clear all errors.
Table 6.5 Diagnostics: SMPTE Errors Window
RegionControlDescription
SMPTE...

6-14CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Cinema Projector Menus
6.9 System Logs Window
To open the System Logs window you need Operator, Administrator, or Service permissions. Tap Menu > 
Diagnostics  > System Logs .
Use the System Logs window to  retrieve or download log files.
Table 6.6 Diagnostics: System Logs Window
ControlDescription
FromThe start date for the log file reporting period. 
To The end date for the log file reporting period.
Type The type of log file to retrieve. These are...

Cinema Projector Menus
CP2230 User Manual6-15020-100430-07 Rev. 1 (05-2014)
6.10 Server Test Window
To open the Server Test window you need Operator, Administrator, or Service permissions. Tap Menu > 
Diagnostics  > Server Test.
Use the Server Test window to test subtitle and metada ta commands supplied with presentation content. You 
can search the subtitle and metadata .xml files for erro rs in content or in transmission from the server. The 
controls in the  Server Test menu DO NOT turn metadata or...

6-16CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Cinema Projector Menus
6.11 DLP Management Window
Use the DLP Management window to manage the TI Integrated Cinema Processor (ICP) electronics. Tap 
Menu > Diagnostics  > DLP Management .
Table 6.7 Diagnostics: DLP Management Window
ControlDescription
Stop DLP 
Communication Turns off communication to the DLP hardware
 (Integrated Cinema Processor and Link 
Decrypter).
Download ICP 
Certificate Copies the ICP certificate to a file on the USB drive. If...

Cinema Projector Menus
CP2230 User Manual6-17020-100430-07 Rev. 1 (05-2014)
6.12 Network Devices
The Network Devices  menu only displays when you add a network device in the  Network Devices Setup 
window. 
To interact with the device tap   in the top right corner of the window. To alter the zoom of the 
device, tap
,  , in the top right corner of the window.
 Figure 6-9 Accessing Christie ACT via the Network Devices Window
 Figure 6-10 Christie ACT Displayed Through the TPC 

6-18CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Cinema Projector Menus
6.13 Channel Setup Windows
To open the Channel Setup windows you need Advanced, Administrator, or Service permissions. Tap Menu > 
Channel Setup .
Use the Channel Setup window to create and store cust omized cinema projector settings for different inputs. 
You can create a maximum of 64 channels.
Table 6.8 Channel Setup Window
ControlDescription
1: Channel Name The name of the channel. 
2: Edit Name Edits the name of the...