Canon scanner imageFORMULA DRM1060 User Manual
Here you can view all the pages of manual Canon scanner imageFORMULA DRM1060 User Manual. The Canon manuals for Scanner are available online for free. You can easily download all the documents as PDF.
Page 31
31 What to do when a double feed is detected When not using the double feed detection ignore function If a document double feed is detected during scanning, document feeding stops when the double fed documents are ejected. When this happens, the following error code is displayed in the Job No. Indicator of the operating panel. Also, a message screen is displayed to notify you that a double feed has been detected. For example, the following screen is displayed in CapturePerfect. When this happens,...
Page 32
32 Detecting Skewed Documents This scanner includes a function that can detect when a document has been fed at a slant. When this function is used, the scanner will stop a scanning operation automatically when it detects a skewed document that exceeds a fixed angle, thereby preventing damage to the document. This function is useful for documents that are 148 mm (5.9) or larger in width. To use the skew detection function, open the scanner driver settings screen and enable the skew detection...
Page 33
33 When a skewed document is detected Feeding automatically stops when a skewed document is detected during scanning. The following error code is also displayed in the Job No. Indicator of the operating panel. Also, a message screen is displayed to notify you that a skewed document has been detected. Hint If [Rapid recovery system] is enabled in the [Others] tab of the scanner driver settings screen, the following screen appears instead of the above message screen. In such cases, reload the document...
Page 34
34 5Click the [OK] button and close the settings screen. 6Place the document as described in “Placing Documents” (see p. 25). When a stapled document or feed error is detected Feeding automatically stops when a stapled document or feed error is detected during scanning. The following error code is also displayed in the Job No. Indicator of the operating panel. A notification that a feed error was detected also appears on the screen. Hint When [Rapid recovery system] is enabled in the [Others] tab...
Page 35
35 Scanning methods Scanning with CaptureOnTouch What is CaptureOnTouch? CaptureOnTouch is a scanning application that allows you to scan a document with a simple operation by following the instructions on the screen. CaptureOnTouch is provided with multiple scanning methods that can be selected according to the purpose and application. Scan First Scan a document and then select the output method. This method allows you to easily scan a document by just following the instructions on the screen....
Page 36
36 Exiting CaptureOnTouch Click at the top of the window to close the CaptureOnTouch main window . When doing so, the main window closes but CaptureOnTouch is kept as resident in the system. To stop CaptureOnTouch being resident in the system, click the (CaptureO nTouchiconj in the taskbar, and select [Exit] from the menu. CaptureOnTouch becomes no longer resident in the system and the icon disappears from the taskbar. Restarting CaptureOnTouch To use CaptureOnTouch after it is no longer resident...
Page 37
37 3Set the scan method in the top screen. ASpecify whether to enable continuous scanning. When scanning multiple documents as one scanned image or splitting up a large document to scan in parts, select [ON] to enable continuous scanning. BSpecify whether to scan the document in full auto mode. When you want to specify arbitrary scanning conditions, select [OFF] and configure the scanner settings. (See p. 41) 4Click the Start button. The document is scanned. While scanning is in progress, the...
Page 38
38 5Configure the settings related to output and then output the scanned images. AConfigure the settings related to output. (See p. 44) BClick this button to output the scanned images. The button name differs for each output method. For example, it is [Save] when the output method is set to [Save to folder]. When output is finished, the complete screen appears. Scan First is now finished. Hint Clicking [Return to top] returns to the main screen of Scan First. When output methods apart from...
Page 39
39 2Enter the job name, and press the Enter key. Hint Job numbers up to 9 are added (in numerical order) to the end of the set job name. By specifying the job number with the operating panel, you can start scanning after pressing the operating panel button. (See p. 41) 3Specify the output method of the job. (See p. 44) 4Click [Output settings], and configure the output settings. The output setting items differ depending on the specified output method. For details on the setting items, see the Help of...
Page 40
40 Hint If you set [Enable continuous scanning] to [ON], you can continue to scan additional documents after all the pages of the initial document are scanned. If you set [Check output after scanning] to [ON], you can check the output settings after scanning. 3Click the Start button. The document is scanned. While scanning is in progress, the number of pages scanned is displayed in addition to the scanner settings. When all the pages of the document are scanned, the scanned images are output...