Canon scanner imageFORMULA DRM1060 User Manual

71
Replacing the Retard Roller
TEMPERATURE WARNING
The inside of the scanner can become very hot after continuous 
operation. Do not touch the scanning glass and metallic portions of 
the retard roller directly.
Be sure to allow sufficient cooling before performing cleaning or 
replacement.
1Slide the roller cover from the left to the center while 
opening it.
2Raise the securing lever for the retard roller toward you, 
and slide it to the left.
3Remove the retard roller.
4Install the new retard roller....

72
6Press the roller cover to close it.
Replacing the Feed Roller
1Lift the securing lever for the feed roller forward.
2Slide the securing lever for the feed roller to the left.
3Lower the feed roller toward you while removing it from 
the left.
4Remove the feed roller.
5Attach the right joint of the new feed roller. 

73
6Attach the left side of the feed roller, and slide the 
securing lever for the feed roller to the right.
7Raise the feed roller toward the back until the securing 
lever clicks into place.
Resetting the counter
1Start Windows and log in as a user with administrator 
privileges.
2Click the Start button, and then click [All Programs], 
[Canon DR-M1060], and [Canon imageFORMULA Utility].
Hint
Canon imageFORMULA Utility is registered to the following 
location in Windows 8.1.imageFORMULA Utility starts....

74
4Click the [Maintenance] tab and then select [Reset].
The counter for [Current Rollers] resets.
5Click [OK] to close the scanner properties.
Auto Power Off Setting
The scanner automatically turns off if 4 hours elapse without scanning 
or another operation being performed.
To disable this setting, follow the procedure below.
1Start Windows and log in as a user with administrator 
privileges.
2Click the Start button, and then click [All Programs], 
[Canon DR-M1060], and [Canon imageFORMULA Utility]....

75
imageFORMULA Utility starts.
3Click [Canon DR-M1060 USB] and click [Properties].
Scanner properties are displayed.
4Click the [Maintenance] tab and then clear the [Turn off 
automatically after 4 hours] check box.
5Click [OK] to close the scanner properties. 

76
 Troubleshooting
Common Problems and Solutions
This section provides recommended solutions to common problems.
If you have a problem that is not solved by the following, contact your 
local authorized Canon dealer.
Problem 1 The scanner will not turn on.
Solutions Confirm that the AC adapter is plugged firmly into a 
power outlet.
Problem 2 The scanner is not recognized.
Solutions (1) Confirm that the scanner is properly connected to 
the computer with a USB cable.
(2) Confirm that the scanner is...

77
Problem 8 Scanned images are saved in TIFF instead of JPEG 
format.
Solutions When documents are scanned with CapturePerfect 
while [Color Mode] is set to [Detect automatically] in the 
scanner driver, documents detected as black and white 
are automatically saved in TIFF format, even if the file 
type is specified as JPEG format. This occurs because 
JPEG format does not support black and white binary 
format images. If you want to save all images in JPEG 
format, change the scanning [Color Mode] to...

78
Software Troubleshooting
This section describes troubleshooting problems and solutions for 
operating the supplied software (CaptureOnTouch and 
CapturePerfect).
If scanning is too slow
(1) Close other running programs, if any.
(2) Scanning can be slowed down by memory shortage caused by 
memory-resident applications such as anti-virus programs. Close 
such memory-resident programs if necessary to free up memory 
space.
(3) When insufficient hard disk space is available, the scanner may 
be unable to...

79
Useful tips
Here are some useful tips for scanning documents.
Where are scanned images saved? Can the save destination be 
changed?
Images are saved to the following locations, according to program 
settings.
For example, save locations such as the following can be set in 
CaptureOnTouch.
CaptureOnTouch
 For Scan First scanning, files are saved in the folder specified on the 
Output Settings screen.
 For selected job scanning, files are saved in the folder specified on 
the [Output setting] during job...

80
CapturePerfect
The rules for the file names of scanned images and the folder in which 
scanned images are saved can be set and then applied during 
scanning. For details, see the “Operating Guide” or help of 
CapturePerfect.
How do I scan half-folded documents (folio scanning)?
Fold the document in half, and set it in the scanner with the fold at the 
right. Specify half-size document (the size after folding) and select 
[Folio] for the [Scanning side], then scan. For details, see p. 27.
How can I...