Canon scanner imageFORMULA DRM1060 User Manual

51
Adjust the brightness and contrast of scanned images.
In addition, you can also click [Gamma] and set the gamma correction 
value for scanned images.
[Image processing] tab
Set the processing method for scanned images.
[Feeding] tab
Specify scanner operations related to document feeding.
[Others] tab
Configure special scan method and image processing settings.
[Imprinter / Addon Dialog] tab
Configure settings for text that can be added onto scanned images. 

52
Setting Basic Scanning Conditions
This section provides an overview of the basic setting items that are 
the minimum requirements when configuring the scanner settings.
Confirming Basic Conditions for 
Scanning
When you scan a document, make sure you confirm the [Color mode], 
[Page Size], [Dots per inch], and [Scanning Side] basic conditions in 
the Basic settings dialog box.
Color mode
Select the scanning mode.
 [Advanced Text Enhancement] and [Advanced Text Enhancement 
II] remove or process the...

53
Dots per inch
Select the scanning resolution.
 Higher resolutions provide clearer images but result in larger file 
sizes and slower scanning.
 When [Detect automatically] is specified, the resolution is detected 
automatically from the content printed in the document.
 The [Moire Reduction] setting in the [Image processing] tab is 
enabled when the resolution is 300 dpi or lower, while the [Image 
Quality] setting is enabled when the resolution is set to 400 dpi or 
600 dpi.
Scanning Side
Select...

54
 When [Speed priority] is selected, a 400-/600-dpi image is generated 
from the image scanned at 300 dpi. The scanning speed will be 
faster, but the quality will be slightly reduced.
 When [Image quality priority] is selected, documents will always be 
scanned at 600 dpi. When [Dots per inch] is set to [400 dpi], a 400-
dpi image will be generated from the image scanned at 600 dpi. The 
scanning speed will be slightly reduced.
Scanning Documents of Unregistered 
Page Sizes
You can register a...

55
Configuring Scanner Settings According 
to Purpose
Set the scanning conditions according to the scanning purpose.
When you want to delete the images of the blank pages in 
two-sided documents
Set the scanning side setting to [Skip Blank Page] on the [Basic] tab 
to delete the images of the blank pages in the document.
If [Skip Blank Page] is selected, the [Setting] button is enabled, and 
you can adjust the level for judging whether pages are blank.
When you do not want to scan colored lines and text...

56
When you want to enhance contours in images
Adjust the edge emphasis setting on the [Image processing] tab.
When you want to make lines and text in scanned images 
thicker or thinner
Drag the [Character Emphasis] slider in the [Image processing] tab to 
make lines and text in the scanned images thicker or thinner.
When you want to enhance text that is difficult to read 
because of factors such as the background of the 
scanned document
Select [Advanced Text Enhancement] or [Advanced Text 
Enhancement...

57
When you want to detect multiple pages fed at the same 
time
Select the [Double Feed Detection] check box on the [Feeding] tab. 
You can enable either one or both of [Detect by Ultrasonic] and 
[Detect by Length].
When you want to match the orientation of images to the 
text when scanning a mixture of pages with different text 
orientations
Select [Text orientation recognition] in [Document Orientation] on the 
[Others] tab. The text orientation on each page is detected, and the 
scanned image is...

58
When you want to use batch separation for scanning
When you want to divide and scan a document, you can separate a 
batch at the timing with which each next document is placed and 
scanned. (Only enabled for applications that support batch 
separation.) In this case, set the scanner driver as follows.
 Set [Feeding Option] on the [Feeding] tab to [Panel-Feeding] or 
[Automatic Feeding].
 Set [Batch Separation] on the [Others] tab to [Auto].
When [Batch Separation] is set to [Auto], the batch is...

59
AWhen you want to specify different scanning conditions for the front 
and back pages of a document, select [Skip Blank Page] or [Both] 
for [Scanning Side] on the [Basic] tab in advance.
BSpecify the number of scanning conditions to apply in [Stream 
count of Front]. Up to three can be specified.
CSelect [Front 1st], and then open the other tabs and set the 
scanning conditions. Depending on the value specified for [Stream 
count of Front], configure the remaining [Front 2nd] and [Front 3rd] 
in the...

60
 Select the [Erase Notch] check box to remove notches that protrude 
from object outlines in scanned images.
When you want to save a scanner driver setting
When you finish configuring a setting, click the [Save] button of [User 
Preference] to save the setting.
The saved setting is registered to the list. You can delete a setting 
from the list with the [Delete] button, and save or load a configuration 
file with the [Back Up] or [Restore] button.