Canon scanner imageFORMULA DRM1060 User Manual

11
Introduction
Thank you for purchasing the Canon imageFORMULA DR-M1060 
Document Scanner. 
Please read the following manuals carefully and familiarize yourself 
with the functions of the scanner before use to ensure you sufficiently 
understand the functions and make the most of the scanner’s 
capabilities. After reading the manuals, store them in a safe place for 
future reference.
Manuals for the Scanner
Documentation for this scanner consists of the following manuals.
●Setup Guide
This describes...

12
Symbols Used in This Manual
The following symbols are used in this manual to explain procedures, 
restrictions, handling precautions, and instructions that should be 
observed for safety.
WARNING
Indicates a warning concerning operations that may lead to death 
or injury to persons if not performed correctly. To use the scanner 
safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to 
persons, or damage to property if not performed...

13
Table of Contents
Setup Guide ......................................................................... 4
Introduction ....................................................................... 11
Symbols Used in This Manual .................................................... 12
Before Using the Scanner .......................... 14
Important Safety Instructions .....................................  14
Installation Location .............................................................. 14
AC...

14
Before Using the Scanner
Important Safety Instructions
To ensure the safe operation of this scanner, be sure to read the 
safety warnings and precautions described below.
Installation Location
The performance of this scanner is affected by the environment in 
which it is installed. Make sure that the location where the scanner is 
installed meets the following environmental requirements.
●Provide adequate space around the scanner for operation, 
maintenance, and ventilation.
●When scanning documents...

15
Moving the Scanner
●When moving the scanner, always hold it with both hands to avoid 
dropping it.
●Make sure to disconnect the interface cable and AC adapter before 
moving the scanner. If the scanner is transported with these items 
connected, the plugs and connectors may be damaged.
Handling
WARNING
Note the following precautions whenever using the scanner. Failure to 
do so may result in a fire or electric shock.
●Never use alcohol, benzene, paint thinner, aerosol sprays, or any 
other highly...

16
●Never place small metal objects such as staples, paper clips, or 
jewelry on the scanner. These items may fall into the scanner, and 
cause a fire or electric shock. Should such objects ever fall inside 
the scanner, immediately push the power button to turn it OFF, and 
disconnect the power plug from the power outlet. Then, contact 
your local authorized Canon dealer or service representative to 
have the unit serviced.
●Do not install the scanner in a humid or dusty location. Doing so 
might cause...

17
Features of the Scanner
The main features of the DR-M1060 document scanner are described 
below.
●Highly Efficient Scanning with A3 Compatibility
The front-side input/output U-turn path design allows smooth 
feeding and output of documents. The scanner supports a variety of 
document sizes, handling documents that are up to A3 in size.
●Fast Document Feeding
A4 documents can be scanned at a speed of up to 60 pages per 
minute in any scanning mode, including black and white, grayscale, 
and color.
*...

18
●Prescan Function
The scanner is equipped with a Prescan function that allows you to 
adjust the contrast and brightness of a prescanned image and then 
send the adjusted image to the application software, without 
needing to scan the document again.
●Character/Line Emphasis Function
If characters and lines in scanned images are not clearly visible, you 
can use this function to adjust their thickness during scanning.
●Skew Detection Function
The scanner automatically stops operation when documents...

19
Names and Functions of Parts
Front View (With the Feed Tray Open)
AEject Support
Open this when scanning documents that are 150 mm (A5 
horizontal) or longer.
BEject Support Extension
Extend this when scanning documents that are longer than 
279 mm (LTR, vertical).
CFeed Support
Extend this when loading documents that are longer than 150 mm 
(A5 horizontal).
DFeed Support Extension
Extend this when loading documents that are longer than 216 mm 
(LTR horizontal).
EDocument Feed Tray
Place the...

20
The power button lights or flashes as follows depending on the 
scanner status.
KFeed Selection Lever
Use this to change the way documents are fed.
Set the lever to the lower position when scanning documents 
consecutively. (See p. 24)
Set the lever to the upper position when scanning documents one 
page at a time or scanning multi-page documents that are fastened 
together. (See p. 24)
LLED Indicator (Orange)
This lights during non separation feeding mode.
MDocument Guides
Align the document guides...