Canon scanner imageFORMULA DRM1060 User Manual

61
Function Restrictions Depending on Mode Setting
Some of the setting items in each of the driver tabs are disabled as follows depending on the setting for [Color Mode] on the [Basic] tab.
[Brightness] tab
(O: Available for setting, X: Not available for setting)[Others] Tab
(O: Available for setting, X: Not available for setting)
[Image processing] tab
(O: Available for setting, X: Not available for setting)
1)Not available for setting if all of the following conditions in the [Auto Image Type Detection...

62
More Advanced Scanning Methods
Using a Patchcode for Scanning
DR-M1060 supports batch separation (automatic file separation) 
functions by using patchcodes.
By tucking patchcode sheets supplied with this scanner into a 
document and scanning it, the scanner can automatically separate 
files by images of documents containing patchcode sheets (or 
documents after the patchcode sheet).
Hint
 This function can be used with the supplied CapturePerfect 
software. Other applications that support this...

63
IMPORTANT
 Patchcodes must be printed in their normal size. If patchcodes 
are enlarged or reduced, they may not be recognized correctly.
 When copying provided patchcodes to create different sized 
patchcodes, ensure that the patchcode fits inside the effective 
range shown in the following diagram. Also, when copying 
patchcodes, ensure that they are the same size and shade as 
the original. Keep the patchcode sheet clean. Take particular care to keep 
the patchcode detection range area clean. Also,...

64
When using other ISIS-compatible applications, open the scanner 
driver settings screen and select [Patchcode] in [Batch 
Separation] on the [Others] tab. 

65
Maintenance
Daily Maintenance
Clean the scanner on a regular basis, as described below, to maintain 
peak scanning quality.
CAUTION
 When cleaning the scanner and the inside of the scanner, turn OFF 
the power switch and disconnect the power cord from the power 
outlet.
 Do not use spray cleaners to clean the scanner. Precision 
mechanisms, such as the light source, may get wet, and cause a 
malfunction.
 Never use paint thinner, alcohol, or other organic solvents to clean 
the scanner. The exterior...

66
2Raise the OPEN lever, and open the upper unit.
3Use a dry cloth, for example, to remove dust and paper 
particles from the inside of the scanner.
Use compressed air to remove any dust that cannot be removed 
with the cloth.
4Wipe any dirt off the scanning glass.
Wipe any dirt off the scanning glass with a cloth that has been 
dampened with water and thoroughly wrung out, and then wipe 
the glass dry with a clean, dry and soft cloth.
CAUTION
Do not spray water or neutral detergent directly on the...

67
5Clean the rollers.
Clean the rollers while turning them.
Wipe the rollers with a cloth that has been dampened with water 
and thoroughly wrung out, and then use a clean, dry and soft cloth 
to wipe away any moisture.
6Remove the retard roller and feed roller. (See p. 71, p. 72)
IMPORTANT
Remove the retard roller and feed roller from the scanner to clean 
them, and be sure to reattach them to the scanner when cleaning 
is finished.
7Wipe the removed rollers with a cloth that has been 
dampened with...

68
10Close the document feed tray.
Adjusting the Reduction Ratio
As the rollers installed in the scanner wear out, scanned images may 
become stretched in the vertical direction. If this happens, you can 
reduce the amount of stretching of the image by adjusting the 
reduction ratio.
1Start Windows and log in as a user with administrator 
privileges.
2Click the Start button, and then click [All Programs], 
[Canon DR-M1060], and [Canon imageFORMULA Utility].
Hint
Canon imageFORMULA Utility is registered...

69
3Click [Canon DR-M1060 USB] and click [Properties].
Scanner properties are displayed.
4Click the [Maintenance] tab and then change the value of 
[Reduction ratio adjustment].
The adjustment value can be set within the range from -3.0% to 
3.0%.
5Click [OK] to close the scanner properties.
Replacing Consumable Parts
The feed roller and retard roller are consumable parts.
The feed roller and retard roller wear with scanning. If the feed roller 
and retard roller are worn, documents may not feed...

70
2Raise the OPEN lever, and open the upper unit.
Hint
The location of each of the consumable parts is shown below.
3Close the upper unit by gently pushing down on the left 
and right sides. Push until it clicks into place to make 
sure that it is completely closed.
4Close the document feed tray.
Feed Roller (inside the 
upper unit)
Retard roller