Canon scanner imageFORMULA DR6010C User Manual

							Chapter 7  ISIS/TWAIN Driver Settings
7-22
With the [Standard Feeding] Feeding Option 
With the [Automatic Feeding] or [Panel Feeding] Feeding Option 
[Auto]
Each batch of documents is saved with different file names.
[Panel]
Document batches are separated when the [Batch Separation] button on the Scan Panel is pressed.  
(See “Scan Panel,” on p. 3-21.)
 
[Patchcode]
Batches are separated whenever a patchcode sheet is detected between documents. (See “3-6 
Using Patchcode Sheets,” on p. 3-23.)
☞When [Patchcode] is selected, the [Folio] Scanning Side setting on the [Basic] tab sheet is not 
available.
Patchcode Orientation (ISIS driver only)
When [Patchcode] batch separation is enabled, you can select patchcode orientation here.
 
☞Settings for various patchcode types and orientations on document pages are as follows.
 
[Prescan] Check Box
When this check box is selected, the first document page is prescanned and displayed in the 
Prescan panel when scanning is first star ted. Continue scanning after you confirm or adjust 
brightness and contrast of the scanned image in the Prescan window. (See “Prescan,” on p. 9-7.)
Patchcode orientation 0° 90° 180° 270°Patch T 
FILE A
Patch I I 
FILE B 
						

							Chapter 7  ISIS/TWAIN Driver Settings
7-23
[Barcodes] Button
This is enabled when the optional barcode module is installed: click it to open the Barcode dialog 
box and make settings affecting barcode detection in documents. For details, see the ISIS/TWAIN 
driver Help, or contact your supplier.
[Addon] Button
This button opens the [Addon] dialog box, where you can make setting for adding text or bitmap 
images to scanned document images. (See “Addon Dialog Box,” on p. 7-24.)
  
						

							Chapter 7  ISIS/TWAIN Driver Settings
7-24
Addon Dialog Box
The [Addon] dialog box provides access to the following dialog boxes, where you can make setting 
for adding text or bitmap images to scanned document images. 
The [Addon] dialog box enables you to make setting for adding text or bitmap images to scanned 
document images.
 
Addon Dialog Box
Bitmap Settings for the Addon Dialog Box (See p. 7-27.)
Character String Settings for the Addon 
Dialog Box (See p. 7-27.)
Second Counter Settings Dialog Box
First Counter Settings Dialog Box 
(See p. 7-28.) 
						

							Chapter 7  ISIS/TWAIN Driver Settings
7-25
[Addon] Check Box
Select this check box to apply text or bitmap images to scanned document images.
Imprinter Side
Select the side on which to apply your text or images.
[Enable] Check Box
Select this check box to enable the application of add-on text.
Tex t
Enter the text string to be applied.
☞The following characters can be entered.
 Numerals 0 to 9
 Alphabetic characters A to Z and a to z
 Punctuation and symbols: ! # $ % &( ) * + - . , / : ; < > =?@[ ] { } ~ ` \
☞Enter special text such as counters, dates and arrows from the list that appears by clicking the 
[Special] button. The selected abbreviation is inserted into the text string.
 
[Single counter] abbreviation: 
Inserts one 9-digit counter.
[Double counter] abbreviation: 
Inserts two 9-digit counters.
[Single counter with number of characters] abbreviation: 
A dialog box appears in which to specify the number of characters of the single counter. The 
specified number of characters of the single counter will be inserted into scanned images.
[Double counter with number of characters] abbreviation: 
A dialog box appears in which to specify the number of characters of the double counter. The 
specified number of characters of the double counter will be inserted into scanned images.
[Current time] abbreviation: 
Inserts the time of scanning using 8 digits in 24-hour format.
[Date (Month/Day/Year)] abbreviation: 
Inserts the date of scanning using 10 characters in Month/Day/Year format.
[Date (Day/Month/Year)] abbreviation: 
Inserts the date of scanning using 10 characters in Day/Month/Year format.
[Date (Year/Month/Day)] abbreviation: 
Inserts the date of scanning using 10 characters in Year/Month/Day format.
[Up arrow] abbreviation: 
Inserts an up arrow (K) symbol. 
						

							Chapter 7  ISIS/TWAIN Driver Settings
7-26
[Down arrow] abbreviation: 
Inserts a down arrow (L) symbol.
[Left arrow] abbreviation: 
Inserts a left arrow () symbol.
[Right arrow] abbreviation: 
Inserts a right arrow (J) symbol.
☞Special text can only be entered for one type of counter. If entered for two counter types, the 
Preview panel displays an error message.
 
☞Add-on text may consist of up to 96 characters. However, the actual number of characters may be 
limited by font size. If the number of characters to apply exceeds the maximum allowed, the 
Preview panel displays an error.
 
☞When inserting special text, the actual number of characters to apply can become quite large, 
even though little text is actually entered.
[Orientation]
Specify the orientation for the text to be applied.
 
☞Text orientation relative to the feeding direction is as follows.
 
[Font size]
Select the font size of the text to be applied.
Font size (points):3, 4, 6, 8, 9, 10, 12, 16, 18 , 20, 24, 28, 30 or 38
Orientation 0° 90° 180°270°
Addon 
						

							Chapter 7  ISIS/TWAIN Driver Settings
7-27
☞When add-on text is applied to an image, the size of the characters depends on the scan 
resolution.
[Enable] Check Box
Select this check box to enable application of bitmap images to scanned images.
☞When adding a bitmap image, it is processed when scanning is started. This can cause some 
delay before scanning actually begins, depending on the size and settings of the bitmap image.
☞When adding a bitmap image, a message is displayed until scanning begins.
[File name]
Specify the file name of the image to be applied.
☞The bitmap image with the specified file name is rotated 90 degrees when applied.
☞Only bitmap images (*.bmp files) can be applied.
Preview Panel
The specified content to be applied is displayed in the Preview panel.
 
☞You can magnify the Preview display in four steps with the left mouse button, and reduce it with 
the right mouse button.
[Show preview] button
Click this button to activate the Preview panel.
Text/Bitmap Settings Dialog Box
Here you can make settings for text or bitmaps to be applied to scanned images.
  
						

							Chapter 7  ISIS/TWAIN Driver Settings
7-28
 
[Horizontal Offset]
Enter the desired offset from the edge of the document feeder inlet.
 
☞When applying an add-on to the front side, enter the offset from the left side of the feeder inlet.
☞When applying an add-on to the back side, enter the offset from the right side of the feeder inlet.
☞The entered offset is the distance to the left end of the applied text (or bitmap image.)
[Vertical Offset]
Enter the distance from the top edge of the page.
 
Print width
Enter the width of the bitmap image to be applied.
 
☞The bitmap image will be rotated 90º clockwise and compressed to the specified width before it is 
applied.
☞An error message may appear depending on the size of the image file. If this happens, reduce the 
Print width.
First Counter
This is the current setting for the single counter, or for the first counter if double counters are 
selected.
☞Settings can be changed in the First Counter settings dialog box.
Second Counter
This is the current setting for the second counter if double counters are selected.
☞Settings can be changed in the Second Counter settings dialog box.
First and Second Counter Settings Dialog Boxes
Make settings for add-on counters.
  
						

							Chapter 7  ISIS/TWAIN Driver Settings
7-29
Start Value
Enter the start value for the counter.
Increment
This is the counter increment value. The counter increments by the value entered here.
Increment Trigger
Specifies the type of event that triggers a counter increment.
[New File] (ISIS driver only)
The counter increments when a batch separation occurs according to the Batch Separation settings 
on the [Others] tab sheet. (See “Batch Separation (ISIS driver only),” on p. 7-21.)
[Every Page]
Increments once per page.
[None]
No counter increment occurs.
Reset Value
Select the initial value when the counter is reset.
Reset Trigger
Specifies the type of event that resets the counter.
[New File] (ISIS driver only)
The counter is reset when a batch separation occurs according to the Batch Separation settings on 
the [Others] tab sheet. (See “Batch Separation (ISIS driver only),” on p. 7-21.)
[Every Page]
Resets the counter once per page.
[None]
No counter reset occurs. 
						

							8-1
Chapter 8Job Registration Tool Settings
This chapter describes Job Registration Tool settings for job functions. Refer to Section “3-4 Job 
Function,” on p. 3-9 for details.
8-1 Starting the Job Registration Tool
The Job Registration Tool is a TWAIN-compliant application program that installs with the ISIS/
TWAIN driver, and is started by the following procedure. 
1Click the Windows [Start] button, and click then [Programs] ([All Programs] for  Windows XP) 
Æ [DR-6010C] Æ [Job Registration Tool].
The Job Registration Tool starts. (See “8-2 Job Registration Tool Settings Dialog Box,” on p. 8-
2.)
 
  
						

							Chapter 8  Job Registration Tool Settings
8-2
8-2 Job Registration Tool Settings Dialog Box
The Job Registration Tool Settings dialog box provides access to the [New/Editing ] dialog box and 
the [Admin] dialog box, and the New/Edit dialog box provides access to function setting dialog 
boxes. (See “[New/Editing] Dialog Box,” on p. 8-4.)
Job Registration Tool Dialog Box 
(p. 8-3)
[New/Editing] Dialog Box (p. 8-4)
Access SettingScanner Settings Dialog Box
PDF/TIFF Settings [Admin] Dialog Box (p. 8-8)