Canon Projector WUX4000 User Manual
Here you can view all the pages of manual Canon Projector WUX4000 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
81
Setting Display Status
User’s ManualSettin
g Functions from Menus
Adjust Input Signal (Ana-
log PC) Horizontal pixels
[Input signal settings] - [Horizontal pixels]
You can adjust the number of the pixels in
the horizontal directi on if the length of the
screen is too long or too short in the hori-
zontal direction.
Use [ ] / [ ] to select a value.
When you have completed the adjust-
ment, press the MENU button.
• Perform this adjustment if the [AUTO PC]
function ( P51) cannot adjust the projected...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-80.png "Page 81
81
Setting Display Status
User’s ManualSettin
g Functions from Menus
Adjust Input Signal (Ana-
log PC) Horizontal pixels
[Input signal settings] - [Horizontal pixels]
You can adjust the number of the pixels in
the horizontal directi on if the length of the
screen is too long or too short in the hori-
zontal direction.
Use [ ] / [ ] to select a value.
When you have completed the adjust-
ment, press the MENU button.
• Perform this adjustment if the [AUTO PC]
function ( P51) cannot adjust the projected...")
81 Setting Display Status User’s ManualSettin g Functions from Menus Adjust Input Signal (Ana- log PC) Horizontal pixels [Input signal settings] - [Horizontal pixels] You can adjust the number of the pixels in the horizontal directi on if the length of the screen is too long or too short in the hori- zontal direction. Use [ ] / [ ] to select a value. When you have completed the adjust- ment, press the MENU button. • Perform this adjustment if the [AUTO PC] function ( P51) cannot adjust the projected...
Page 82
![Page 82
Setting Display Status
82
Selecting HDMI Input
Level
[HDMI input level]
You can select this as required when you
project visual software with an HDMI sig-
nal.
Press the OK button to accept your setting
and then press the MENU button.
[Auto] is the factory default.
You can select this only when the type of sig-
nal sent from AV equipment is RGB.
The signal level is sel ected automatically in
[Auto] mode. (Some AV equipment may not
support this.)
If the HDMI output of your AV equipment allows...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-81.png "Page 82
Setting Display Status
82
Selecting HDMI Input
Level
[HDMI input level]
You can select this as required when you
project visual software with an HDMI sig-
nal.
Press the OK button to accept your setting
and then press the MENU button.
[Auto] is the factory default.
You can select this only when the type of sig-
nal sent from AV equipment is RGB.
The signal level is sel ected automatically in
[Auto] mode. (Some AV equipment may not
support this.)
If the HDMI output of your AV equipment allows...")
Setting Display Status 82 Selecting HDMI Input Level [HDMI input level] You can select this as required when you project visual software with an HDMI sig- nal. Press the OK button to accept your setting and then press the MENU button. [Auto] is the factory default. You can select this only when the type of sig- nal sent from AV equipment is RGB. The signal level is sel ected automatically in [Auto] mode. (Some AV equipment may not support this.) If the HDMI output of your AV equipment allows...
Page 83
![Page 83
83
Setting Display Status
User’s ManualSettin
g Functions from Menus
Select HDMI Over Scan
[HDMI over scan]
You can select this as required when you
project visual software using an HDMI sig-
nal.
Press the OK button to accept your setting
and then press the MENU button.
• The factory defaults settings are [On]
when [HDMI In] ( P102) is set for [Auto]
and [Off] when it is set for [Computer].
Performing Progressive
Processing
[Progressive]
You can select this as required when the
images have low...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-82.png "Page 83
83
Setting Display Status
User’s ManualSettin
g Functions from Menus
Select HDMI Over Scan
[HDMI over scan]
You can select this as required when you
project visual software using an HDMI sig-
nal.
Press the OK button to accept your setting
and then press the MENU button.
• The factory defaults settings are [On]
when [HDMI In] ( P102) is set for [Auto]
and [Off] when it is set for [Computer].
Performing Progressive
Processing
[Progressive]
You can select this as required when the
images have low...")
83 Setting Display Status User’s ManualSettin g Functions from Menus Select HDMI Over Scan [HDMI over scan] You can select this as required when you project visual software using an HDMI sig- nal. Press the OK button to accept your setting and then press the MENU button. • The factory defaults settings are [On] when [HDMI In] ( P102) is set for [Auto] and [Off] when it is set for [Computer]. Performing Progressive Processing [Progressive] You can select this as required when the images have low...
Page 84
![Page 84
Setting Display Status
84
Selecting a Menu Position
[Menu position]
You can change the position of menus dis-
played.
Move the menu to the desired position
with the [ ], [ ], [ ] / [ ] buttons.
When the menu has been moved to the
desired position, press the OK or MENU
button.
Correcting the Screen
Color
[Screen color]
You can adjust the color quality of the
images projected corresponding to the
color of the projection screen.
Press the OK button to accept your setting
and then press the MENU...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-83.png "Page 84
Setting Display Status
84
Selecting a Menu Position
[Menu position]
You can change the position of menus dis-
played.
Move the menu to the desired position
with the [ ], [ ], [ ] / [ ] buttons.
When the menu has been moved to the
desired position, press the OK or MENU
button.
Correcting the Screen
Color
[Screen color]
You can adjust the color quality of the
images projected corresponding to the
color of the projection screen.
Press the OK button to accept your setting
and then press the MENU...")
Setting Display Status 84 Selecting a Menu Position [Menu position] You can change the position of menus dis- played. Move the menu to the desired position with the [ ], [ ], [ ] / [ ] buttons. When the menu has been moved to the desired position, press the OK or MENU button. Correcting the Screen Color [Screen color] You can adjust the color quality of the images projected corresponding to the color of the projection screen. Press the OK button to accept your setting and then press the MENU...
Page 85
![Page 85
85
Setting Display Status
User’s ManualSettin
g Functions from Menus
Reversing Projection
[Image flip H/V]
Select this setting if you want to hang the
projector from the ceiling or project an
image from behind the screen.
Press the OK button to accept your setting
and then press the MENU button.
• [None] is the factory default.
To hang the projector from the ceiling, use
the optional bracket. Contact the Canon
Customer Support Center for more
detailed information.
If you flip the image, the...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-84.png "Page 85
85
Setting Display Status
User’s ManualSettin
g Functions from Menus
Reversing Projection
[Image flip H/V]
Select this setting if you want to hang the
projector from the ceiling or project an
image from behind the screen.
Press the OK button to accept your setting
and then press the MENU button.
• [None] is the factory default.
To hang the projector from the ceiling, use
the optional bracket. Contact the Canon
Customer Support Center for more
detailed information.
If you flip the image, the...")
85 Setting Display Status User’s ManualSettin g Functions from Menus Reversing Projection [Image flip H/V] Select this setting if you want to hang the projector from the ceiling or project an image from behind the screen. Press the OK button to accept your setting and then press the MENU button. • [None] is the factory default. To hang the projector from the ceiling, use the optional bracket. Contact the Canon Customer Support Center for more detailed information. If you flip the image, the...
Page 86
![Page 86
Setting Display Status
86
No Signal Screen
[User screen settings] - [No signal screen]
You can display either a black or blue
screen when there is no input signal.
Press the OK button to accept your setting
and then press the MENU button.
[Blue] is the factory default.
Screen When Blank
[User screen settings] - [Screen when blank]
You can display a black or blue screen and
temporarily blank out the projected image
by pressing the BLANK button on the
remote control.
Press the OK button to accept...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-85.png "Page 86
Setting Display Status
86
No Signal Screen
[User screen settings] - [No signal screen]
You can display either a black or blue
screen when there is no input signal.
Press the OK button to accept your setting
and then press the MENU button.
[Blue] is the factory default.
Screen When Blank
[User screen settings] - [Screen when blank]
You can display a black or blue screen and
temporarily blank out the projected image
by pressing the BLANK button on the
remote control.
Press the OK button to accept...")
Setting Display Status 86 No Signal Screen [User screen settings] - [No signal screen] You can display either a black or blue screen when there is no input signal. Press the OK button to accept your setting and then press the MENU button. [Blue] is the factory default. Screen When Blank [User screen settings] - [Screen when blank] You can display a black or blue screen and temporarily blank out the projected image by pressing the BLANK button on the remote control. Press the OK button to accept...
Page 87
![Page 87
87
Setting Display Status
User’s ManualSettin
g Functions from Menus
Selecting a Logo at Star-
tup
[User screen settings] - [Projector on]
You can display a specified logo on the
screen from the moment the projector is
turned on to the moment it is ready for pro-
jection.
Press the OK button to accept your setting
and then press the MENU button.
• [Canon logo] is the factory default.
Selecting Aspect Ratio of
Screen
[Screen aspect]
Select according to the aspect ratio of the
projection screen....](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-86.png "Page 87
87
Setting Display Status
User’s ManualSettin
g Functions from Menus
Selecting a Logo at Star-
tup
[User screen settings] - [Projector on]
You can display a specified logo on the
screen from the moment the projector is
turned on to the moment it is ready for pro-
jection.
Press the OK button to accept your setting
and then press the MENU button.
• [Canon logo] is the factory default.
Selecting Aspect Ratio of
Screen
[Screen aspect]
Select according to the aspect ratio of the
projection screen....")
87 Setting Display Status User’s ManualSettin g Functions from Menus Selecting a Logo at Star- tup [User screen settings] - [Projector on] You can display a specified logo on the screen from the moment the projector is turned on to the moment it is ready for pro- jection. Press the OK button to accept your setting and then press the MENU button. • [Canon logo] is the factory default. Selecting Aspect Ratio of Screen [Screen aspect] Select according to the aspect ratio of the projection screen....
Page 88
![Page 88
88
Selecting an Image Quality
Image adjustment
[Image mode]
You can select an image mode suitable for
the projected image. (P64)
You can also select it with the IMAGE but-
ton on the remote control. ( P65)
Press the OK button to accept your setting
and then press the MENU button.
• [Standard] is t he factory default.
You can adjust the image quality by adjusting the following items in each
image mode:
[Brightness], [Contrast], [Sharpness],
[Gamma], [Color adjustment],
[Advanced adjust ment] and...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-87.png "Page 88
88
Selecting an Image Quality
Image adjustment
[Image mode]
You can select an image mode suitable for
the projected image. (P64)
You can also select it with the IMAGE but-
ton on the remote control. ( P65)
Press the OK button to accept your setting
and then press the MENU button.
• [Standard] is t he factory default.
You can adjust the image quality by adjusting the following items in each
image mode:
[Brightness], [Contrast], [Sharpness],
[Gamma], [Color adjustment],
[Advanced adjust ment] and...")
88 Selecting an Image Quality Image adjustment [Image mode] You can select an image mode suitable for the projected image. (P64) You can also select it with the IMAGE but- ton on the remote control. ( P65) Press the OK button to accept your setting and then press the MENU button. • [Standard] is t he factory default. You can adjust the image quality by adjusting the following items in each image mode: [Brightness], [Contrast], [Sharpness], [Gamma], [Color adjustment], [Advanced adjust ment] and...
Page 89
![Page 89
89
Selecting an Image Quality
User’s ManualSettin
g Functions from Menus
Saving the Desired Image
Quality
[Create Profile]
Up to 5 combinations of image quality set-
tings can be stored. The stored image
quality can be selected as an image mode.
Use the [ ] / [ ] buttons and select the
save destination. (Saved memories are
indicated by checkmarks.)
When the desired save destination is
selected, press the OK button.
• The saved settings consist of the brightness,
contract, sharpness, gamma, color...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-88.png "Page 89
89
Selecting an Image Quality
User’s ManualSettin
g Functions from Menus
Saving the Desired Image
Quality
[Create Profile]
Up to 5 combinations of image quality set-
tings can be stored. The stored image
quality can be selected as an image mode.
Use the [ ] / [ ] buttons and select the
save destination. (Saved memories are
indicated by checkmarks.)
When the desired save destination is
selected, press the OK button.
• The saved settings consist of the brightness,
contract, sharpness, gamma, color...")
89 Selecting an Image Quality User’s ManualSettin g Functions from Menus Saving the Desired Image Quality [Create Profile] Up to 5 combinations of image quality set- tings can be stored. The stored image quality can be selected as an image mode. Use the [ ] / [ ] buttons and select the save destination. (Saved memories are indicated by checkmarks.) When the desired save destination is selected, press the OK button. • The saved settings consist of the brightness, contract, sharpness, gamma, color...
Page 90
![Page 90
Selecting an Image Quality
90
Adjusting the Brightness
[Brightness]
You can adjust the brightness of images.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is stored
as adjusted values for the input signals
and image mode of the current projection.
Adjusting the Contrast
[Contrast]
You can adjust the contrast of images.
If you want to make it more or less vivid,
adjust the difference in tone between the
lightest and darkest po rtions of the image....](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-89.png "Page 90
Selecting an Image Quality
90
Adjusting the Brightness
[Brightness]
You can adjust the brightness of images.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is stored
as adjusted values for the input signals
and image mode of the current projection.
Adjusting the Contrast
[Contrast]
You can adjust the contrast of images.
If you want to make it more or less vivid,
adjust the difference in tone between the
lightest and darkest po rtions of the image....")
Selecting an Image Quality 90 Adjusting the Brightness [Brightness] You can adjust the brightness of images. When you have completed the adjust- ment, press the MENU button. The adjustment you have made is stored as adjusted values for the input signals and image mode of the current projection. Adjusting the Contrast [Contrast] You can adjust the contrast of images. If you want to make it more or less vivid, adjust the difference in tone between the lightest and darkest po rtions of the image....