Canon Projector WUX4000 User Manual
Here you can view all the pages of manual Canon Projector WUX4000 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
71 Useful Functions Available During a Presentation User’s ManualUseful Functions Available During a Presentation Showing the Elapsed Time Press the button to start counting. • The elapsed time is displayed on the lower right corner of the screen. Time is counted up to 59:59. The timer then returns to 00:00. Press the button again to stop the timer. Press the button while the timer is stopped. The timer disappears from the screen. Then press the button to start counting from 00:00. Useful...
Page 72
72
Page 73
Projecting an Image Safety Instructions Before Use Table of Contents Useful Functions Available During a Presentation Setting Functions from Menus User’s Manual InstallationConnecting to a Network Maintenance Appendix Index Appendix Installation Manual 73 Setting Functions from Menus
Page 74
74 How to Use Menus Use the menus to set the operation of the projector in detail. ■Menu Configuration The menu screen is divided into 5 tabs as shown below. Input Signal Types for which a Menu Item is Displayed Different menu items are displayed for different input signal types. In the following explanation of each menu item, the input signal type for which the menu item is displayed is indicated as follows: Contents of menu Menu items HDMIComponent Digital PCAnalog PC Input signal for which the menu...
Page 75
![Page 75
How to Use Menus
75
User’s ManualSettin
g Functions from Menus
■Basic Operation of Menu
1Press the [MENU] button to display the menu window.
2Use the [] / [] buttons to select a tab.
• If the tab position is not highlighted in orange, use the [ ] / [ ] buttons to move the highlight to the top.
3Use the [] / [] buttons to select an item.
Remote control
Projector
Remote controlProjector
Remote control Projector](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-74.png "Page 75
How to Use Menus
75
User’s ManualSettin
g Functions from Menus
■Basic Operation of Menu
1Press the [MENU] button to display the menu window.
2Use the [] / [] buttons to select a tab.
• If the tab position is not highlighted in orange, use the [ ] / [ ] buttons to move the highlight to the top.
3Use the [] / [] buttons to select an item.
Remote control
Projector
Remote controlProjector
Remote control Projector")
How to Use Menus 75 User’s ManualSettin g Functions from Menus ■Basic Operation of Menu 1Press the [MENU] button to display the menu window. 2Use the [] / [] buttons to select a tab. • If the tab position is not highlighted in orange, use the [ ] / [ ] buttons to move the highlight to the top. 3Use the [] / [] buttons to select an item. Remote control Projector Remote controlProjector Remote control Projector
Page 76
![Page 76
How to Use Menus
76
4Select contents.
How to select the contents varies depending on the item.
Selecting from a list Example: Aspect
Adjusting with the [ ] / [ ] buttons Example: Contrast
Selecting from a different screen (1) Example: Menu position
Selecting from a different screen (2) Example: Tracking
5Pressing the MENU button causes the menu screen to disappear.
1. Select Aspect.
2. Press the OK button or [ ] button to dis-
play a list of the contents.
3. Use the [ ] / [ ] buttons to select...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-75.png "Page 76
How to Use Menus
76
4Select contents.
How to select the contents varies depending on the item.
Selecting from a list Example: Aspect
Adjusting with the [ ] / [ ] buttons Example: Contrast
Selecting from a different screen (1) Example: Menu position
Selecting from a different screen (2) Example: Tracking
5Pressing the MENU button causes the menu screen to disappear.
1. Select Aspect.
2. Press the OK button or [ ] button to dis-
play a list of the contents.
3. Use the [ ] / [ ] buttons to select...")
How to Use Menus 76 4Select contents. How to select the contents varies depending on the item. Selecting from a list Example: Aspect Adjusting with the [ ] / [ ] buttons Example: Contrast Selecting from a different screen (1) Example: Menu position Selecting from a different screen (2) Example: Tracking 5Pressing the MENU button causes the menu screen to disappear. 1. Select Aspect. 2. Press the OK button or [ ] button to dis- play a list of the contents. 3. Use the [ ] / [ ] buttons to select...
Page 77
![Page 77
77
User’s ManualSettin
g Functions from Menus
Setting Display Status
Selecting an Image Pro-
jection Mode
[Aspect]
You can select a projection mode corre-
sponding to the aspect ratio of the image.
(P56)
• Different contents are displayed for differ-
ent screen aspects or input signal types.
ASPECT button on the remote control
can also be used to select the Aspect set-
tings.
Press the OK button to accept your setting
and then press the MENU button.
HDMIComponent
Digital PCAnalog PC
Auto An image...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-76.png "Page 77
77
User’s ManualSettin
g Functions from Menus
Setting Display Status
Selecting an Image Pro-
jection Mode
[Aspect]
You can select a projection mode corre-
sponding to the aspect ratio of the image.
(P56)
• Different contents are displayed for differ-
ent screen aspects or input signal types.
ASPECT button on the remote control
can also be used to select the Aspect set-
tings.
Press the OK button to accept your setting
and then press the MENU button.
HDMIComponent
Digital PCAnalog PC
Auto An image...")
77 User’s ManualSettin g Functions from Menus Setting Display Status Selecting an Image Pro- jection Mode [Aspect] You can select a projection mode corre- sponding to the aspect ratio of the image. (P56) • Different contents are displayed for differ- ent screen aspects or input signal types. ASPECT button on the remote control can also be used to select the Aspect set- tings. Press the OK button to accept your setting and then press the MENU button. HDMIComponent Digital PCAnalog PC Auto An image...
Page 78
![Page 78
Setting Display Status
78
Selecting an Input Signal
Type (Analog PC)
[Input signal select]
You can select a suitable resolution if auto
PC adjustment function (P51) cannot
project the correct im age from a computer.
Press the OK button to accept your setting
and then press the MENU button.
Select an input signal corresponding to
the resolution of the computer.
For the signal types supported by the pro- jector, see the table on page 175.
Selecting an Input Signal
Type (Component)
[Input signal...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-77.png "Page 78
Setting Display Status
78
Selecting an Input Signal
Type (Analog PC)
[Input signal select]
You can select a suitable resolution if auto
PC adjustment function (P51) cannot
project the correct im age from a computer.
Press the OK button to accept your setting
and then press the MENU button.
Select an input signal corresponding to
the resolution of the computer.
For the signal types supported by the pro- jector, see the table on page 175.
Selecting an Input Signal
Type (Component)
[Input signal...")
Setting Display Status 78 Selecting an Input Signal Type (Analog PC) [Input signal select] You can select a suitable resolution if auto PC adjustment function (P51) cannot project the correct im age from a computer. Press the OK button to accept your setting and then press the MENU button. Select an input signal corresponding to the resolution of the computer. For the signal types supported by the pro- jector, see the table on page 175. Selecting an Input Signal Type (Component) [Input signal...
Page 79
![Page 79
79
Setting Display Status
User’s ManualSettin
g Functions from Menus
Adjust Input Signal (Ana-
log PC) Total dots
[Input signal settings] - [Total dots]
You can adjust the total number of dots in
the horizontal direction.
Adjust it when stripes are displayed on the
screen.
Use [ ] / [ ] to select a value.
When you have completed the adjust-
ment, press the MENU button.
• Perform this adjustment if the [AUTO PC]
function ( P51) cannot adjust the projected
image correctly.
Adjust Input Signal (Ana-...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-78.png "Page 79
79
Setting Display Status
User’s ManualSettin
g Functions from Menus
Adjust Input Signal (Ana-
log PC) Total dots
[Input signal settings] - [Total dots]
You can adjust the total number of dots in
the horizontal direction.
Adjust it when stripes are displayed on the
screen.
Use [ ] / [ ] to select a value.
When you have completed the adjust-
ment, press the MENU button.
• Perform this adjustment if the [AUTO PC]
function ( P51) cannot adjust the projected
image correctly.
Adjust Input Signal (Ana-...")
79 Setting Display Status User’s ManualSettin g Functions from Menus Adjust Input Signal (Ana- log PC) Total dots [Input signal settings] - [Total dots] You can adjust the total number of dots in the horizontal direction. Adjust it when stripes are displayed on the screen. Use [ ] / [ ] to select a value. When you have completed the adjust- ment, press the MENU button. • Perform this adjustment if the [AUTO PC] function ( P51) cannot adjust the projected image correctly. Adjust Input Signal (Ana-...
Page 80
![Page 80
Setting Display Status
80
Adjust Input Signal (Ana-
log PC) Horizontal posi-
tion
[Input signal settings] - [Horizontal position]
You can adjust the horizontal position of
the screen when the projected image is
shifted in the horizontal direction.
Use [ ] / [ ] to select a value. As the
value increases, the screen moves to the
left.
When you have completed the adjust-
ment, press the MENU button.
Perform this adjustment if the [AUTO PC]
function ( P51) cannot adjust the projected
image...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-79.png "Page 80
Setting Display Status
80
Adjust Input Signal (Ana-
log PC) Horizontal posi-
tion
[Input signal settings] - [Horizontal position]
You can adjust the horizontal position of
the screen when the projected image is
shifted in the horizontal direction.
Use [ ] / [ ] to select a value. As the
value increases, the screen moves to the
left.
When you have completed the adjust-
ment, press the MENU button.
Perform this adjustment if the [AUTO PC]
function ( P51) cannot adjust the projected
image...")
Setting Display Status 80 Adjust Input Signal (Ana- log PC) Horizontal posi- tion [Input signal settings] - [Horizontal position] You can adjust the horizontal position of the screen when the projected image is shifted in the horizontal direction. Use [ ] / [ ] to select a value. As the value increases, the screen moves to the left. When you have completed the adjust- ment, press the MENU button. Perform this adjustment if the [AUTO PC] function ( P51) cannot adjust the projected image...