Canon Projector WUX4000 User Manual
Here you can view all the pages of manual Canon Projector WUX4000 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
41
Connecting the Projector
User’s ManualProjectin
g an Ima
ge
■HDMI cable (Input signal type: [HDMI] – P48 )
■ Outputting Audio to Speakers
It is possible to output audio from the projected images to amplified speakers.
Use an audio cable without a built-in resistor. Us ing an audio cable with a built-in resistor will
reduce the audio volume.
Computer
Digital image
output terminal
(HDMI terminal) HDMI cable (not included)
* When an HDMI cable is connected, digi- tal sound is also connected at the...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-40.png "Page 41
41
Connecting the Projector
User’s ManualProjectin
g an Ima
ge
■HDMI cable (Input signal type: [HDMI] – P48 )
■ Outputting Audio to Speakers
It is possible to output audio from the projected images to amplified speakers.
Use an audio cable without a built-in resistor. Us ing an audio cable with a built-in resistor will
reduce the audio volume.
Computer
Digital image
output terminal
(HDMI terminal) HDMI cable (not included)
* When an HDMI cable is connected, digi- tal sound is also connected at the...")
41 Connecting the Projector User’s ManualProjectin g an Ima ge ■HDMI cable (Input signal type: [HDMI] – P48 ) ■ Outputting Audio to Speakers It is possible to output audio from the projected images to amplified speakers. Use an audio cable without a built-in resistor. Us ing an audio cable with a built-in resistor will reduce the audio volume. Computer Digital image output terminal (HDMI terminal) HDMI cable (not included) * When an HDMI cable is connected, digi- tal sound is also connected at the...
Page 42
![Page 42
Connecting the Projector
42
Connecting to AV Equipment
Connect the projector and AV equipment.
The description provided here is one example. For more detailed information, refer to the
manual for the connected AV equipment.
■ Connecting to Digital Video Output Terminal (Digital Connection)
HDMI cable (Input signal type: [HDMI] – P48)
Before connecting the cables, turn off both the projector and AV equipment.
AV equipment
Digital video out-
put terminal
(HDMI terminal) HDMI cable (not included)
* When...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-41.png "Page 42
Connecting the Projector
42
Connecting to AV Equipment
Connect the projector and AV equipment.
The description provided here is one example. For more detailed information, refer to the
manual for the connected AV equipment.
■ Connecting to Digital Video Output Terminal (Digital Connection)
HDMI cable (Input signal type: [HDMI] – P48)
Before connecting the cables, turn off both the projector and AV equipment.
AV equipment
Digital video out-
put terminal
(HDMI terminal) HDMI cable (not included)
* When...")
Connecting the Projector 42 Connecting to AV Equipment Connect the projector and AV equipment. The description provided here is one example. For more detailed information, refer to the manual for the connected AV equipment. ■ Connecting to Digital Video Output Terminal (Digital Connection) HDMI cable (Input signal type: [HDMI] – P48) Before connecting the cables, turn off both the projector and AV equipment. AV equipment Digital video out- put terminal (HDMI terminal) HDMI cable (not included) * When...
Page 43
![Page 43
43
Connecting the Projector
User’s ManualProjectin
g an Ima
ge
■Connecting to Analog Video Output Terminal (Analog Connection)
Component cable (Input signal type: [Component] – P48)
A component video signal from the AV equipm ent can be inputted into the projector by
connecting the component cable to the ANALOG PC / COMPONENT IN terminal of the
projector.
Use a commercially available component cable that fits the terminal type of the AV equip-
ment to create a relay connection.
Use an audio cable...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-42.png "Page 43
43
Connecting the Projector
User’s ManualProjectin
g an Ima
ge
■Connecting to Analog Video Output Terminal (Analog Connection)
Component cable (Input signal type: [Component] – P48)
A component video signal from the AV equipm ent can be inputted into the projector by
connecting the component cable to the ANALOG PC / COMPONENT IN terminal of the
projector.
Use a commercially available component cable that fits the terminal type of the AV equip-
ment to create a relay connection.
Use an audio cable...")
43 Connecting the Projector User’s ManualProjectin g an Ima ge ■Connecting to Analog Video Output Terminal (Analog Connection) Component cable (Input signal type: [Component] – P48) A component video signal from the AV equipm ent can be inputted into the projector by connecting the component cable to the ANALOG PC / COMPONENT IN terminal of the projector. Use a commercially available component cable that fits the terminal type of the AV equip- ment to create a relay connection. Use an audio cable...
Page 44
Connecting the Projector 44 ■Outputting Audio to Speakers It is possible to output audio from the proj ected images to AV equipment or amplified speakers. Use an audio cable without a built-in resistor. Usin g an audio cable with a built-in resistor will reduce the audio volume. RCA terminal Speaker Projector To AUDIO OUT Audio cable (not included) Mini jack Audio input terminal (AUDIO IN)
Page 45
![Page 45
45
User’s ManualProjectin
g an Ima
ge
Starting Projection
1Check the connection between the projector and the computer or AV equipment.
(P42 – P44 )
2Connect the power cord and make sure that the [STAND BY] indicator is lit (red).
3Press the POWER button.
The [POWER] indicator flashes green, and then stops flashing and remains lit.
The countdown window is displayed for approximately 20 seconds, and then the pro-
jection is started. Press the OK button to make the countdown window disappear.
4Turn on...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-44.png "Page 45
45
User’s ManualProjectin
g an Ima
ge
Starting Projection
1Check the connection between the projector and the computer or AV equipment.
(P42 – P44 )
2Connect the power cord and make sure that the [STAND BY] indicator is lit (red).
3Press the POWER button.
The [POWER] indicator flashes green, and then stops flashing and remains lit.
The countdown window is displayed for approximately 20 seconds, and then the pro-
jection is started. Press the OK button to make the countdown window disappear.
4Turn on...")
45 User’s ManualProjectin g an Ima ge Starting Projection 1Check the connection between the projector and the computer or AV equipment. (P42 – P44 ) 2Connect the power cord and make sure that the [STAND BY] indicator is lit (red). 3Press the POWER button. The [POWER] indicator flashes green, and then stops flashing and remains lit. The countdown window is displayed for approximately 20 seconds, and then the pro- jection is started. Press the OK button to make the countdown window disappear. 4Turn on...
Page 46
Starting Projection 46 ■When the Language Selection Screen Appears A window appears when the projector is turned on for the first time. You can select a lan- guage to be used by the projector for displaying menus and messages in the window. Select the desired language with the pointer buttons and press the OK button. You can change the language from the menu at a later time. ( P101) If the language selection screen is out of focus, press the FOCUS button to perform focus adjustment. ( P59) ■When the...
Page 47
47 Starting Projection User’s ManualProjectin g an Ima ge ■When Notebook Computer Screen Does Not Appear Set your notebook computer to output signals to an external monitor. For more details, refer to “Changing Notebook Computer Screen Output” below. ■Adjusting Image For the display resolution of the computer, select “1920 x 1200 pixels” or the resolution closest to the output signal resolution of the computer. ( P50) Use the auto PC function to adjust shift in computer image or the flickering of...
Page 48
![Page 48
48
Selecting an Input Signal (INPUT)
Select the input signal in the [Input] menu when you want to project a digital PC or AV
equipment signal, or to switch between inputs when multiple computers or multiple sets
of AV equipment are connected.
Skip this step if you have not changed the input signal since the last projection.
■Types of Input Signals
The table below shows the relationship among input signals supported by the projector,
input terminals and connection cables.
Input signal Input...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-47.png "Page 48
48
Selecting an Input Signal (INPUT)
Select the input signal in the [Input] menu when you want to project a digital PC or AV
equipment signal, or to switch between inputs when multiple computers or multiple sets
of AV equipment are connected.
Skip this step if you have not changed the input signal since the last projection.
■Types of Input Signals
The table below shows the relationship among input signals supported by the projector,
input terminals and connection cables.
Input signal Input...")
48 Selecting an Input Signal (INPUT) Select the input signal in the [Input] menu when you want to project a digital PC or AV equipment signal, or to switch between inputs when multiple computers or multiple sets of AV equipment are connected. Skip this step if you have not changed the input signal since the last projection. ■Types of Input Signals The table below shows the relationship among input signals supported by the projector, input terminals and connection cables. Input signal Input...
Page 49
![Page 49
49
Selecting an Input Signal (INPUT)
User’s ManualProjectin
g an Ima
ge
■Selecting an Input Signal
1Press the INPUT button to display the window shown on the lower right.
The currently active input signal is marked with a circle and highlighted in orange.
An input signal that is ready for projection is displayed in white. When no signal is
received, it is displayed in gray. [HDMI] an d [DVI-D] (Digital PC) may be displayed in
gray even if they are ready for projection.
2You can switch the available...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-48.png "Page 49
49
Selecting an Input Signal (INPUT)
User’s ManualProjectin
g an Ima
ge
■Selecting an Input Signal
1Press the INPUT button to display the window shown on the lower right.
The currently active input signal is marked with a circle and highlighted in orange.
An input signal that is ready for projection is displayed in white. When no signal is
received, it is displayed in gray. [HDMI] an d [DVI-D] (Digital PC) may be displayed in
gray even if they are ready for projection.
2You can switch the available...")
49 Selecting an Input Signal (INPUT) User’s ManualProjectin g an Ima ge ■Selecting an Input Signal 1Press the INPUT button to display the window shown on the lower right. The currently active input signal is marked with a circle and highlighted in orange. An input signal that is ready for projection is displayed in white. When no signal is received, it is displayed in gray. [HDMI] an d [DVI-D] (Digital PC) may be displayed in gray even if they are ready for projection. 2You can switch the available...
Page 50
![Page 50
50
Adjusting the Image
Setting the Display Resolution of the Computer
Based on the performance of the projector (resolution: 1920 x 1200 pixels), set the dis-
play resolution of the computer to “1920 x 1200 pixels” or the resolution closest to the out-
put signal resolution of the computer. ( P175)
■Windows 7
1Open the [Control Pane l] from the start
menu, then select [Appearance and Per-
sonalization] - [Adjust screen resolution] in
the [Control Panel Home].
2Click the [Resolution] tab, and move the...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-49.png "Page 50
50
Adjusting the Image
Setting the Display Resolution of the Computer
Based on the performance of the projector (resolution: 1920 x 1200 pixels), set the dis-
play resolution of the computer to “1920 x 1200 pixels” or the resolution closest to the out-
put signal resolution of the computer. ( P175)
■Windows 7
1Open the [Control Pane l] from the start
menu, then select [Appearance and Per-
sonalization] - [Adjust screen resolution] in
the [Control Panel Home].
2Click the [Resolution] tab, and move the...")
50 Adjusting the Image Setting the Display Resolution of the Computer Based on the performance of the projector (resolution: 1920 x 1200 pixels), set the dis- play resolution of the computer to “1920 x 1200 pixels” or the resolution closest to the out- put signal resolution of the computer. ( P175) ■Windows 7 1Open the [Control Pane l] from the start menu, then select [Appearance and Per- sonalization] - [Adjust screen resolution] in the [Control Panel Home]. 2Click the [Resolution] tab, and move the...