Canon Projector WUX4000 User Manual
Here you can view all the pages of manual Canon Projector WUX4000 User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
61
Adjusting the Image
User’s ManualProjectin
g an Ima
ge
■Resetting the Position
The lens position after movement with the lens shift function is not returned when the
power is turned off. To return it to its original position, perform reset.
During screen position adjust ment, press and hold the LENS-SHIFT button on the remote
control or the LENS button on the projector to display the [Lens shift Reset] window.
The selections for the lens currently used are displayed. Use the pointer buttons to...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-60.png "Page 61
61
Adjusting the Image
User’s ManualProjectin
g an Ima
ge
■Resetting the Position
The lens position after movement with the lens shift function is not returned when the
power is turned off. To return it to its original position, perform reset.
During screen position adjust ment, press and hold the LENS-SHIFT button on the remote
control or the LENS button on the projector to display the [Lens shift Reset] window.
The selections for the lens currently used are displayed. Use the pointer buttons to...")
61 Adjusting the Image User’s ManualProjectin g an Ima ge ■Resetting the Position The lens position after movement with the lens shift function is not returned when the power is turned off. To return it to its original position, perform reset. During screen position adjust ment, press and hold the LENS-SHIFT button on the remote control or the LENS button on the projector to display the [Lens shift Reset] window. The selections for the lens currently used are displayed. Use the pointer buttons to...
Page 62
Adjusting the Image 62 Adjusting Keystone Distortion The D.SHIFT/KEYSTONE button can be used to correct keystone distortion. 1Press the D.SHIFT/KEYSTONE button to display the window shown on the lower right. Keystone can be adjusted within the range of ±20 degrees. If the keystone distortion is too large to adjust, move the projector installa tion position so that it is completely straight. The result of keystone adjustment is stored in memory. If you place the projector in the same position, the...
Page 63
![Page 63
63
Adjusting the Image
User’s ManualProjectin
g an Ima
ge
2Press the pointer buttons to adjust.
3When keystone distortion has been corrected, press the OK button.
■Resetting the Keystone Adjustment
Perform the following steps to reset the keystone adjustment.
Press the D.SHIFT/KEYSTONE button twice to display the [Keystone reset] window.
On the window, select [OK] with the [ ] button, and then press the OK button.
[ ] button
Reduces the length of the upper edge[ ] button
Reduces the length of the...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-62.png "Page 63
63
Adjusting the Image
User’s ManualProjectin
g an Ima
ge
2Press the pointer buttons to adjust.
3When keystone distortion has been corrected, press the OK button.
■Resetting the Keystone Adjustment
Perform the following steps to reset the keystone adjustment.
Press the D.SHIFT/KEYSTONE button twice to display the [Keystone reset] window.
On the window, select [OK] with the [ ] button, and then press the OK button.
[ ] button
Reduces the length of the upper edge[ ] button
Reduces the length of the...")
63 Adjusting the Image User’s ManualProjectin g an Ima ge 2Press the pointer buttons to adjust. 3When keystone distortion has been corrected, press the OK button. ■Resetting the Keystone Adjustment Perform the following steps to reset the keystone adjustment. Press the D.SHIFT/KEYSTONE button twice to display the [Keystone reset] window. On the window, select [OK] with the [ ] button, and then press the OK button. [ ] button Reduces the length of the upper edge[ ] button Reduces the length of the...
Page 64
![Page 64
64
Selecting an Image Mode
You can select an image mode to suit the projected image.
In each image mode, you can further adjust the brightness, contrast, sharpness, gamma,
color adjustment, advanced ad justment, and lamp mode. (P88 )
■Image Modes
The image modes which can be selected vary somewhat depending on the selected
input signal.
Image Mode
Compatible input signals
ExplanationDigital PC
Analog PC
HDMI ([Computer])Component
HDMI ([Auto])
Standard Suitable for projecting a computer
screen or...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-63.png "Page 64
64
Selecting an Image Mode
You can select an image mode to suit the projected image.
In each image mode, you can further adjust the brightness, contrast, sharpness, gamma,
color adjustment, advanced ad justment, and lamp mode. (P88 )
■Image Modes
The image modes which can be selected vary somewhat depending on the selected
input signal.
Image Mode
Compatible input signals
ExplanationDigital PC
Analog PC
HDMI ([Computer])Component
HDMI ([Auto])
Standard Suitable for projecting a computer
screen or...")
64 Selecting an Image Mode You can select an image mode to suit the projected image. In each image mode, you can further adjust the brightness, contrast, sharpness, gamma, color adjustment, advanced ad justment, and lamp mode. (P88 ) ■Image Modes The image modes which can be selected vary somewhat depending on the selected input signal. Image Mode Compatible input signals ExplanationDigital PC Analog PC HDMI ([Computer])Component HDMI ([Auto]) Standard Suitable for projecting a computer screen or...
Page 65
![Page 65
65
Selecting an Image Mode
User’s ManualProjectin
g an Ima
ge
■How to Select an Image Mode
Press the IMAGE button on the remote control to select.
The image mode changes each time the IMAGE button is pressed. (The displayed image
modes vary depending on the selected input signal.)
You can also select any image mode from the [Image mode] menu. ( P88)
• User settings 1 - 5 are displayed when th e desired image settings have been created
and stored using the user memory func tion in the image...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-64.png "Page 65
65
Selecting an Image Mode
User’s ManualProjectin
g an Ima
ge
■How to Select an Image Mode
Press the IMAGE button on the remote control to select.
The image mode changes each time the IMAGE button is pressed. (The displayed image
modes vary depending on the selected input signal.)
You can also select any image mode from the [Image mode] menu. ( P88)
• User settings 1 - 5 are displayed when th e desired image settings have been created
and stored using the user memory func tion in the image...")
65 Selecting an Image Mode User’s ManualProjectin g an Ima ge ■How to Select an Image Mode Press the IMAGE button on the remote control to select. The image mode changes each time the IMAGE button is pressed. (The displayed image modes vary depending on the selected input signal.) You can also select any image mode from the [Image mode] menu. ( P88) • User settings 1 - 5 are displayed when th e desired image settings have been created and stored using the user memory func tion in the image...
Page 66
![Page 66
66
Turning Off the Projector
1Press the POWER button to display the window shown on the lower right.
When this window is displayed, press the POWER button again to turn off the power.
The lamp goes off, the [STAND BY] indicator starts flashing in red and the cooling
process starts.
2Disconnect the power cord from the AC outlet.
If the power plug is left connected, the [STAND BY] indicator will switch from flashing
to constantly illuminated after the cooling process is completed.
You cannot turn the...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-65.png "Page 66
66
Turning Off the Projector
1Press the POWER button to display the window shown on the lower right.
When this window is displayed, press the POWER button again to turn off the power.
The lamp goes off, the [STAND BY] indicator starts flashing in red and the cooling
process starts.
2Disconnect the power cord from the AC outlet.
If the power plug is left connected, the [STAND BY] indicator will switch from flashing
to constantly illuminated after the cooling process is completed.
You cannot turn the...")
66 Turning Off the Projector 1Press the POWER button to display the window shown on the lower right. When this window is displayed, press the POWER button again to turn off the power. The lamp goes off, the [STAND BY] indicator starts flashing in red and the cooling process starts. 2Disconnect the power cord from the AC outlet. If the power plug is left connected, the [STAND BY] indicator will switch from flashing to constantly illuminated after the cooling process is completed. You cannot turn the...
Page 67
Useful Functions Available During a Presentation User’s Manual Safety Instructions Before Use Table of Contents Appendix Index Appendix Installation Connecting to a NetworkProjecting an Image Setting Functions from Menus Maintenance Installation Manual 67 Useful Functions Available During a Presentation
Page 68
68 Useful Functions Available During a Presentation Temporarily Blacking Out an Image Press the button to black out the image. Press the button again to show the image. You can set the screen state while black- ing out the image on the menu. ( P86) The lamp remains illuminated while the image is blacked out. Freezing the Pic- ture Press the button to freeze the moving image. The projector shows the following icon. Press the button again to cancel the FREEZE function. It is also cancelled...
Page 69
![Page 69
69
Useful Functions Available During a Presentation
User’s ManualUseful Functions Available During a Presentation
Adjusting the Volume
Press the button. The following screen
appears.
• You can also adjust the volume level with
the
[] / [] buttons of the projector.
Adjust the volume or mute setting on the computer if the volume level is too low.
You can also adjust the volume level of the speakers connected via the audio output
terminal.
Muting the Sound
Press the button to mute the sound.
The...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-68.png "Page 69
69
Useful Functions Available During a Presentation
User’s ManualUseful Functions Available During a Presentation
Adjusting the Volume
Press the button. The following screen
appears.
• You can also adjust the volume level with
the
[] / [] buttons of the projector.
Adjust the volume or mute setting on the computer if the volume level is too low.
You can also adjust the volume level of the speakers connected via the audio output
terminal.
Muting the Sound
Press the button to mute the sound.
The...")
69 Useful Functions Available During a Presentation User’s ManualUseful Functions Available During a Presentation Adjusting the Volume Press the button. The following screen appears. • You can also adjust the volume level with the [] / [] buttons of the projector. Adjust the volume or mute setting on the computer if the volume level is too low. You can also adjust the volume level of the speakers connected via the audio output terminal. Muting the Sound Press the button to mute the sound. The...
Page 70
![Page 70
Useful Functions Available During a Presentation
70
Zooming an Image
Press the button. A part of the image is
enlarged each time the button is pressed.
The magnification appears on the screen.
You can move the enlarged area by using
the
[], [], [] / [] buttons.
You can restore the original size of the
image by pressing the button.
Useful when:
• Zooming in on an object such as a small
graph during a presentation (up to 12x).
• Focusing on the current subject.
Remote control
Screen
Remote control...](http://img.usermanuals.tech/thumb/14/98911/w300_projector_manual_6831_d-69.png "Page 70
Useful Functions Available During a Presentation
70
Zooming an Image
Press the button. A part of the image is
enlarged each time the button is pressed.
The magnification appears on the screen.
You can move the enlarged area by using
the
[], [], [] / [] buttons.
You can restore the original size of the
image by pressing the button.
Useful when:
• Zooming in on an object such as a small
graph during a presentation (up to 12x).
• Focusing on the current subject.
Remote control
Screen
Remote control...")
Useful Functions Available During a Presentation 70 Zooming an Image Press the button. A part of the image is enlarged each time the button is pressed. The magnification appears on the screen. You can move the enlarged area by using the [], [], [] / [] buttons. You can restore the original size of the image by pressing the button. Useful when: • Zooming in on an object such as a small graph during a presentation (up to 12x). • Focusing on the current subject. Remote control Screen Remote control...