Canon Projector WUX4000 User Manual

51
Adjusting the Image
User’s ManualProjectin
g an Ima
ge
■Mac OS X
1Open the Apple Menu and select [System 
Preferences].
2In the [System Preferences] window, click 
the [Displays] icon to display the Display 
window.
3Select the [Display] tab and select “1920 x 
1200” or the resolution closest to the out-
put signal resolution of the computer from 
the [Resolutions] list.
4Close the [System Preferences] window.
AUTO PC
If the image display is shifted  or there is flickering of the screen when [Analog...

Adjusting the Image
52
Selecting Screen Aspect and Aspect
Select an optimum aspect ratio of the projected imag e (screen aspect) or an optimum 
screen mode (aspect) according to the aspect  ratio of the screen, type of input image 
signal and so on for the projection to make best use of the screen size.
[Screen aspect] Select the same screen aspect ratio as the screen you are using.
[Aspect] In general, select [Auto].
You may need to change the setting dependin g on the resolution of the computer. If the...

53
Adjusting the Image
User’s ManualProjectin
g an Ima
ge
4Use the [] / [ ] buttons to select the desired contents.
16:10
Select this when you use a screen with aspect ratio of 
16:10. Also, select this wh en you project an image on 
a wall. You can correct keys tone distortion with this 
mode.
16:9
Select this when you use a screen with aspect ratio of 
16:9. You can correct keystone distortion with this 
mode.
4:3
Select this when you use a screen with aspect ratio of 
4:3. You can correct keystone...

Adjusting the Image
54
Moving Image with 16:9 D. Image Shift
1Press the D.SHIFT/KEYSTONE button when [16:9 D. image shift] is selected as the 
screen aspect in order to display the window shown on the lower right.
2Use the [ ] /  [] buttons to move the image. The minimum value is -60, and the max-
imum value is +60.
3When the image fits the scree n, press the OK button.
Remote control
[ ] button
Moves image up[ ] button
Moves image down
Remote control Projector
16:9 screen 

55
Adjusting the Image
User’s ManualProjectin
g an Ima
ge
Moving Image with 4:3 D. Image Shift
1Press the D.SHIFT/KEYSTONE butt on when [4:3 D. image shift] is selected as the 
screen aspect in order to display the window shown on the lower right.
2Use [ ] / [ ] to move the image. The minimum value is -160, and the maximum value 
is +160.
3When the image fits the screen, press the OK button.
Resetting the Image Shift
Perform the following steps to reset the image shift adjustment.
Press the...

Adjusting the Image
56
■Selecting Aspect Ratio
Select the aspect ratio of pr ojected image based on the input signal type, aspect ratio of 
the screen and resolution.
For more details, refer to page  173 “Relationship between Aspect and Screen Aspect”.
Types of Aspect Ratios
Auto
The image is projected at the  aspect ratio of the input signal. Select this mode for nor-
mal image projection.
Full
The image is projected using an in put signal aspect ratio of 16:10.
Select this to project computer screen...

57
Adjusting the Image
User’s ManualProjectin
g an Ima
ge
How to Select an Aspect Ratio
Press the ASPECT button on the remote control and select an appropriate aspect ratio. Press the 
ASPECT  button to change the aspect ratio type.
For more details on the aspect ratios, refer to page 173 “Relationship between Aspect and Screen 
Aspect”.
You can also select any aspect ratio from the menu. ( P77)
Some aspect ratios may not appear depending on the type of input signal.
Example:Remote control 

Adjusting the Image
58
Adjusting the Image Size
The size of the projected image can be adjusted by pressing the ZOOM button on the 
remote control or the  LENS button on the projector.
Change the projector installation position if y our desired image is too large or too small to 
adjust it with the zoom function. ( P125)
1Press either the ZOOM button on the remote  controller or the LENS button on the pro-
jector twice in order to display the window shown at lower right.
2Press the pointer buttons to...

59
Adjusting the Image
User’s ManualProjectin
g an Ima
ge
Adjusting the Focus
To adjust the focus, press the  FOCUS button on the remote control or the  LENS button on 
the projector.
For the projection distances of the Standard  Zoom Lens (RS-IL01ST) / Long Zoom Lens 
(RS-IL02LZ) / Short Fixed Lens (RS-IL03WF), refer to page  124 “Relationship Between 
Image Size and Projecting Distance”.
1Press either the FOCUS button on the remote control or the LENS button on the pro-
jector in order to display the...

Adjusting the Image
60
Adjusting the Image Position
To adjust the screen position up, down, left, or right, press the LENS-SHIFT button on the 
remote control or the  LENS button on the projector. This function is referred to as “lens 
shift” because the position of the projected  image is changed by moving the lens posi-
tion. ( P126)
1Press either the LENS-SHIFT button on the remote control or the LENS button on the 
projector 3 times in order to display the window shown on the lower right.
2Press the...