Canon Projector WUX10 Mark II User Manual

61Selecting Screen Aspect and Aspect
Projecting an Image 
Selecting Aspect Ratio
Select the aspect ratio of projecting image based on the input signal type, aspect ratio of 
the screen and resolution.
For more details on the aspect ratios, refer to When Projecting an Image from a Com-
puter on page 127.
■Types of Aspect Ratios
Auto
An image is projected at an aspect ratio of the input signal. Select this mode for normal 
image projection.
Full
An image is projected at an aspect ratio of 16:10.
Select...

Selecting Screen Aspect and Aspect
62
■How to Select an Aspect Ratio
Press the ASPECT button on the remote control to select an appropriate aspect ratio. The selection 
is toggled among types for aspect ratios by pressing the ASPECT button.
For more details on the aspect ratios, refer to When Projecting an Image from a Computer on page 
127.
You can also select any aspect ratio from the menu. (P75)
Some aspect ratios may not appear depending on types of input signals.
Remote control 

63
Projecting an Image 
Selecting an Image Mode
You can select an image mode depending on the projecting image.
In each image mode, you can further adjust the brightness, contrast, sharpness, gamma, 
color adjustment, advanced adjustment, and lamp mode. (P86)
■Image modes
Standard
Select this to project an image with near-original quality and a high regard for reproduc-
tion of white. It is suited to project text-based computer screens or visual software (mov-
ing pictures) in a bright room....

64
Turning Off the Projector
1Press the POWER button to pop up a window shown at the lower right.
Press the POWER button again while the confirmation message is displayed.
The lamp goes off, the [POWER] indicator starts flashing in red and the cooling fan 
starts.
2Disconnect the power cord from the AC outlet.
It continues to cool down the lamp even after removing the power cord. Thus, you 
may move or put away the projector immediately after the use.
With the power cord connected, the LED illumination...

65
Table of Contents
Safety Instructions
Before Use
Projecting an Image 
Useful Functions Available During a Presentation
 
Setting Up Functions from Menus
Connecting the Projector to Network
Appendix
Index
Useful Functions 
Available During 
a Presentation 

66
Useful Functions Available During a Presentation
Blackened Out an Image 
Temporarily
Useful when:
 You finished the presentation.
You want to divert attendees attention from 
the screen.
Press the   button to blacken out the 
image.
Press the   button again to show the 
image.
 You can set the screen state while 
blackening out the image on the menu. 
You can also set a specified image. 
(P84)
 The lamp keeps a turn-on state while 
blackening out the image.
 The (middle) LED illumination lamp on...

67 Useful Functions Available During a Presentation
Useful Functions Available During a Presentation
Adjusting the Volume
Useful when:
 You want to adjust the volume level of the pro-
jectors or external speaker.
Press the   button. The following screen 
appears.
 You can also adjust the volume level 
with [] of the projector.
 Adjust the volume or mute setting on the 
computer if the volume level is too low.
 You can also adjust the volume level of 
the speakers connected via the audio 
output...

Useful Functions Available During a Presentation
68
Zooming an Image
Useful when:
 Zoom in an object such as a small graph dur-
ing a presentation (up to 12x).
 Focusing on the current subject.
Press the   button. A part of the image is 
enlarged each time pressed.
 The magnification appears on the 
screen.You can move the area to the enlarged by 
using [ ] / [ ] / [].
You can restore the original size of the 
image by pressing the   button.
Remote control

69 Useful Functions Available During a Presentation
Useful Functions Available During a Presentation
Showing the Elapsed Time
Useful when:
 You want to manage the proceedings of the 
presentation.
Press the   button to start counting.
 The elapsed time is displayed at the 
lower right corner of the screen.
 Time is counted up to 59:59. Then the 
timer returns to 00:00.
Press the   button again to stop the 
timer.
 Press the   button while the timer is 
stopped. The timer disappears from the 
screen....

70