Canon Projector WUX10 Mark II User Manual
Here you can view all the pages of manual Canon Projector WUX10 Mark II User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
71 Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index Setting Functions from Menus
Page 72
72 How to Use Menus With a menu, you can set the operation of the projector in detail. ■Menu Configuration The menu screen is divided into four tabs as follows: Input Signal Types for which a Menu Item is Displayed Different menu items are displayed for different input signal types. In the following explanation of each menu item, the input signal type for which the menu item is displayed is indicated as follows: HDMICOMPONENT DIGITAL PCVIDEO ANALOG PC Input signal for which the menu item is displayed...
Page 73
![Page 73
How to Use Menus
73
Setting Up Functions from Menus
■Basic Operation of Menu
1Press the MENU button to display a menu window.
2Use [] to select a tab.
If the tab position is not highlighted in orange, use [ ] / [ ] to move the highlight to
the top.
3Use [ ] / [ ] to select a item.
Remote controlTop control
Remote controlTop control](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-72.png "Page 73
How to Use Menus
73
Setting Up Functions from Menus
■Basic Operation of Menu
1Press the MENU button to display a menu window.
2Use [] to select a tab.
If the tab position is not highlighted in orange, use [ ] / [ ] to move the highlight to
the top.
3Use [ ] / [ ] to select a item.
Remote controlTop control
Remote controlTop control")
How to Use Menus 73 Setting Up Functions from Menus ■Basic Operation of Menu 1Press the MENU button to display a menu window. 2Use [] to select a tab. If the tab position is not highlighted in orange, use [ ] / [ ] to move the highlight to the top. 3Use [ ] / [ ] to select a item. Remote controlTop control Remote controlTop control
Page 74
![Page 74
How to Use Menus
74
4Select contents.
How to select the contents varies depending on items.
Selection from a list Example: Aspect
With [] Example: Contrast
In a different screen (1) Example: Menu position
In a different screen (2) Example: Tracking
5Press the MENU button, and the menu screen disappears.
1. Press the OK button or [>], and a list of the
contents is displayed.
2. Use [ ] / [ ] to select contents.
3. If you found the contents you desired,
press the OK button or [>].](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-73.png "Page 74
How to Use Menus
74
4Select contents.
How to select the contents varies depending on items.
Selection from a list Example: Aspect
With [] Example: Contrast
In a different screen (1) Example: Menu position
In a different screen (2) Example: Tracking
5Press the MENU button, and the menu screen disappears.
1. Press the OK button or [>], and a list of the
contents is displayed.
2. Use [ ] / [ ] to select contents.
3. If you found the contents you desired,
press the OK button or [>].")
How to Use Menus 74 4Select contents. How to select the contents varies depending on items. Selection from a list Example: Aspect With [] Example: Contrast In a different screen (1) Example: Menu position In a different screen (2) Example: Tracking 5Press the MENU button, and the menu screen disappears. 1. Press the OK button or [>], and a list of the contents is displayed. 2. Use [ ] / [ ] to select contents. 3. If you found the contents you desired, press the OK button or [>].
Page 75
![Page 75
75
Setting Up Functions from Menus
Setting Display Status
Selecting an Image Projection Mode
[Aspect]
You can select a projection mode corre-
sponding to the aspect ratio of image.
(P61)
Different contents are displayed for dif-
ferent screen aspects or input signal
types.
The ASPECT button on the remote con-
trol can also be used to select the
Aspect settings.
Press the OK button to accept your setting
and then press the MENU button.
HDMICOMPONENT
DIGITAL PCVIDEO
ANALOG PC
AutoAn image is...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-74.png "Page 75
75
Setting Up Functions from Menus
Setting Display Status
Selecting an Image Projection Mode
[Aspect]
You can select a projection mode corre-
sponding to the aspect ratio of image.
(P61)
Different contents are displayed for dif-
ferent screen aspects or input signal
types.
The ASPECT button on the remote con-
trol can also be used to select the
Aspect settings.
Press the OK button to accept your setting
and then press the MENU button.
HDMICOMPONENT
DIGITAL PCVIDEO
ANALOG PC
AutoAn image is...")
75 Setting Up Functions from Menus Setting Display Status Selecting an Image Projection Mode [Aspect] You can select a projection mode corre- sponding to the aspect ratio of image. (P61) Different contents are displayed for dif- ferent screen aspects or input signal types. The ASPECT button on the remote con- trol can also be used to select the Aspect settings. Press the OK button to accept your setting and then press the MENU button. HDMICOMPONENT DIGITAL PCVIDEO ANALOG PC AutoAn image is...
Page 76
![Page 76
Setting Display Status
76
Selecting an Input Signal Type (ANALOG
PC)
[Input signal select]
You can select a proper resolution if auto
PC adjustment function (P52) cannot
project a correct image from a computer.
Press the OK button to accept your setting
and then press the MENU button.
Select an input signal corresponding to
the resolution of the computer.
For the signal types supported by the
projector, see the table on page 130.
Selecting an Input Signal Type (VIDEO)
[Input signal select]
You...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-75.png "Page 76
Setting Display Status
76
Selecting an Input Signal Type (ANALOG
PC)
[Input signal select]
You can select a proper resolution if auto
PC adjustment function (P52) cannot
project a correct image from a computer.
Press the OK button to accept your setting
and then press the MENU button.
Select an input signal corresponding to
the resolution of the computer.
For the signal types supported by the
projector, see the table on page 130.
Selecting an Input Signal Type (VIDEO)
[Input signal select]
You...")
Setting Display Status 76 Selecting an Input Signal Type (ANALOG PC) [Input signal select] You can select a proper resolution if auto PC adjustment function (P52) cannot project a correct image from a computer. Press the OK button to accept your setting and then press the MENU button. Select an input signal corresponding to the resolution of the computer. For the signal types supported by the projector, see the table on page 130. Selecting an Input Signal Type (VIDEO) [Input signal select] You...
Page 77
![Page 77
77Setting Display Status
Setting Up Functions from Menus
Selecting an Input Signal Type (COMPO-
NENT)
[Input signal select]
You can select a proper component signal
type, if a video image from AV equipment
is not projected correctly.
Press the OK button to accept your setting
and then press the MENU button.
[Auto] is the factory default.
Refer to the Users Manual of your AV
equipment connected to the projector to
confirm the component signal type.
Adjusting Input Signal (ANALOG PC) –
Total...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-76.png "Page 77
77Setting Display Status
Setting Up Functions from Menus
Selecting an Input Signal Type (COMPO-
NENT)
[Input signal select]
You can select a proper component signal
type, if a video image from AV equipment
is not projected correctly.
Press the OK button to accept your setting
and then press the MENU button.
[Auto] is the factory default.
Refer to the Users Manual of your AV
equipment connected to the projector to
confirm the component signal type.
Adjusting Input Signal (ANALOG PC) –
Total...")
77Setting Display Status Setting Up Functions from Menus Selecting an Input Signal Type (COMPO- NENT) [Input signal select] You can select a proper component signal type, if a video image from AV equipment is not projected correctly. Press the OK button to accept your setting and then press the MENU button. [Auto] is the factory default. Refer to the Users Manual of your AV equipment connected to the projector to confirm the component signal type. Adjusting Input Signal (ANALOG PC) – Total...
Page 78
![Page 78
Setting Display Status
78
Adjusting Input Signal (ANALOG PC) –
Tracking
[Input signal settings] - [Tracking]
You can fine-tune the timing for generating
an image from the image signal.
Adjusts the tracking when the image dis-
torts or flickers.
Use [] to select a value.
When you have completed the adjust-
ment, press the MENU button.
Perform this adjustment if the [AUTO
PC] function (P52) cannot adjust the
project image correctly.
You can make adjustment either for
[ANALOG PC-1] or [ANALOG...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-77.png "Page 78
Setting Display Status
78
Adjusting Input Signal (ANALOG PC) –
Tracking
[Input signal settings] - [Tracking]
You can fine-tune the timing for generating
an image from the image signal.
Adjusts the tracking when the image dis-
torts or flickers.
Use [] to select a value.
When you have completed the adjust-
ment, press the MENU button.
Perform this adjustment if the [AUTO
PC] function (P52) cannot adjust the
project image correctly.
You can make adjustment either for
[ANALOG PC-1] or [ANALOG...")
Setting Display Status 78 Adjusting Input Signal (ANALOG PC) – Tracking [Input signal settings] - [Tracking] You can fine-tune the timing for generating an image from the image signal. Adjusts the tracking when the image dis- torts or flickers. Use [] to select a value. When you have completed the adjust- ment, press the MENU button. Perform this adjustment if the [AUTO PC] function (P52) cannot adjust the project image correctly. You can make adjustment either for [ANALOG PC-1] or [ANALOG...
Page 79
![Page 79
79Setting Display Status
Setting Up Functions from Menus
Adjust Input Signal (ANALOG PC) – Vertical
position
[Input signal settings] - [Vertical position]
You can adjust the vertical position of the
screen when the projected image is
shifted in the vertical direction.
Use [] to select a value. As the value
increases, the screen moves upward.
When you have completed the adjust-
ment, press the MENU button.
Perform this adjustment if the [AUTO
PC] function (P52) cannot adjust the
project image...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-78.png "Page 79
79Setting Display Status
Setting Up Functions from Menus
Adjust Input Signal (ANALOG PC) – Vertical
position
[Input signal settings] - [Vertical position]
You can adjust the vertical position of the
screen when the projected image is
shifted in the vertical direction.
Use [] to select a value. As the value
increases, the screen moves upward.
When you have completed the adjust-
ment, press the MENU button.
Perform this adjustment if the [AUTO
PC] function (P52) cannot adjust the
project image...")
79Setting Display Status Setting Up Functions from Menus Adjust Input Signal (ANALOG PC) – Vertical position [Input signal settings] - [Vertical position] You can adjust the vertical position of the screen when the projected image is shifted in the vertical direction. Use [] to select a value. As the value increases, the screen moves upward. When you have completed the adjust- ment, press the MENU button. Perform this adjustment if the [AUTO PC] function (P52) cannot adjust the project image...
Page 80
![Page 80
Setting Display Status
80
Adjust Input Signal (ANALOG PC) – Vertical
pixels
[Input signal settings] - [Vertical pixels]
You can adjust the number of the pixels in
the vertical direction if the length of the
screen is too long or too short in the verti-
cal direction.
Use [] to select a value.
When you have completed the adjust-
ment, press the MENU button.
Perform this adjustment if the [AUTO
PC] function (P52) cannot adjust the
project image correctly.
You can make adjustment either for...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-79.png "Page 80
Setting Display Status
80
Adjust Input Signal (ANALOG PC) – Vertical
pixels
[Input signal settings] - [Vertical pixels]
You can adjust the number of the pixels in
the vertical direction if the length of the
screen is too long or too short in the verti-
cal direction.
Use [] to select a value.
When you have completed the adjust-
ment, press the MENU button.
Perform this adjustment if the [AUTO
PC] function (P52) cannot adjust the
project image correctly.
You can make adjustment either for...")
Setting Display Status 80 Adjust Input Signal (ANALOG PC) – Vertical pixels [Input signal settings] - [Vertical pixels] You can adjust the number of the pixels in the vertical direction if the length of the screen is too long or too short in the verti- cal direction. Use [] to select a value. When you have completed the adjust- ment, press the MENU button. Perform this adjustment if the [AUTO PC] function (P52) cannot adjust the project image correctly. You can make adjustment either for...