Canon Projector WUX10 Mark II User Manual
Here you can view all the pages of manual Canon Projector WUX10 Mark II User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
81Setting Display Status
Setting Up Functions from Menus
Select HDMI Over Scan
[HDMI over scan]
You can select this as required when you
project visual software with the HDMI sig-
nals.
Press the OK button to accept your setting
and then press the MENU button.
[On] is the factory default.
Performing Progressive Processing
[Progressive]
You can select this as required when the
images have low resolution.
Press the OK button to accept your setting
and then press the MENU button.
[Auto] is the...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-80.png "Page 81
81Setting Display Status
Setting Up Functions from Menus
Select HDMI Over Scan
[HDMI over scan]
You can select this as required when you
project visual software with the HDMI sig-
nals.
Press the OK button to accept your setting
and then press the MENU button.
[On] is the factory default.
Performing Progressive Processing
[Progressive]
You can select this as required when the
images have low resolution.
Press the OK button to accept your setting
and then press the MENU button.
[Auto] is the...")
81Setting Display Status Setting Up Functions from Menus Select HDMI Over Scan [HDMI over scan] You can select this as required when you project visual software with the HDMI sig- nals. Press the OK button to accept your setting and then press the MENU button. [On] is the factory default. Performing Progressive Processing [Progressive] You can select this as required when the images have low resolution. Press the OK button to accept your setting and then press the MENU button. [Auto] is the...
Page 82
![Page 82
Setting Display Status
82
Selecting a Menu Position
[Menu position]
You can change the position of menu dis-
played.
Move the menu to the desired position with [ ] /
[].
When the menu has been moved to the desired
position, press the OK or MENU button.
Correcting the Screen Color
[Screen color]
You can adjust the color quality of the images
projected corresponding to the color of the pro-
jection screen.
Press the OK button to accept your setting and
then press the MENU button.
[Normal] is the...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-81.png "Page 82
Setting Display Status
82
Selecting a Menu Position
[Menu position]
You can change the position of menu dis-
played.
Move the menu to the desired position with [ ] /
[].
When the menu has been moved to the desired
position, press the OK or MENU button.
Correcting the Screen Color
[Screen color]
You can adjust the color quality of the images
projected corresponding to the color of the pro-
jection screen.
Press the OK button to accept your setting and
then press the MENU button.
[Normal] is the...")
Setting Display Status 82 Selecting a Menu Position [Menu position] You can change the position of menu dis- played. Move the menu to the desired position with [ ] / []. When the menu has been moved to the desired position, press the OK or MENU button. Correcting the Screen Color [Screen color] You can adjust the color quality of the images projected corresponding to the color of the pro- jection screen. Press the OK button to accept your setting and then press the MENU button. [Normal] is the...
Page 83
![Page 83
83Setting Display Status
Setting Up Functions from Menus
Reversing projection
[Image flip H/V]
You can make this setting if you want to
hang the projector from the ceiling or
project an image from behind the screen.
Press the OK button to accept your setting
and then press the MENU button.
[None] is the factory default. To hung the projector from the ceiling,
use the optional bracket. Contact your
Canon dealer.
The keystone distortion adjustment will
be reset.
HDMICOMPONENT
DIGITAL PCVIDEO...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-82.png "Page 83
83Setting Display Status
Setting Up Functions from Menus
Reversing projection
[Image flip H/V]
You can make this setting if you want to
hang the projector from the ceiling or
project an image from behind the screen.
Press the OK button to accept your setting
and then press the MENU button.
[None] is the factory default. To hung the projector from the ceiling,
use the optional bracket. Contact your
Canon dealer.
The keystone distortion adjustment will
be reset.
HDMICOMPONENT
DIGITAL PCVIDEO...")
83Setting Display Status Setting Up Functions from Menus Reversing projection [Image flip H/V] You can make this setting if you want to hang the projector from the ceiling or project an image from behind the screen. Press the OK button to accept your setting and then press the MENU button. [None] is the factory default. To hung the projector from the ceiling, use the optional bracket. Contact your Canon dealer. The keystone distortion adjustment will be reset. HDMICOMPONENT DIGITAL PCVIDEO...
Page 84
![Page 84
Setting Display Status
84
No Signal Screen
[User screen settings] - [No signal screen]
You can display either of a black or blue
screen when there is no input signal.
Press the OK button to accept your setting
and then press the MENU button.
[Blue] is the factory default.
Screen When Blank
[User screen settings] - [Screen when blank]
You can display a black or blue screen
when the projected image is blanked off
temporarily by pressing the BLANK button
on the remote control.
Press the OK button to...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-83.png "Page 84
Setting Display Status
84
No Signal Screen
[User screen settings] - [No signal screen]
You can display either of a black or blue
screen when there is no input signal.
Press the OK button to accept your setting
and then press the MENU button.
[Blue] is the factory default.
Screen When Blank
[User screen settings] - [Screen when blank]
You can display a black or blue screen
when the projected image is blanked off
temporarily by pressing the BLANK button
on the remote control.
Press the OK button to...")
Setting Display Status 84 No Signal Screen [User screen settings] - [No signal screen] You can display either of a black or blue screen when there is no input signal. Press the OK button to accept your setting and then press the MENU button. [Blue] is the factory default. Screen When Blank [User screen settings] - [Screen when blank] You can display a black or blue screen when the projected image is blanked off temporarily by pressing the BLANK button on the remote control. Press the OK button to...
Page 85
![Page 85
85Setting Display Status
Setting Up Functions from Menus
Selecting a Logo at Startup
[User screen settings] - [Projector on]
You can display a specified logo on a
screen from the moment the projector is
turned on to the moment it is ready fro pro-
jection.
Press the OK button to accept your setting
and then press the MENU button.
[Canon logo] is the factory default.
Selecting Aspect Ratio of Screen
[Screen aspect]
You can select proper option corresponding to
the aspect ratio of the projecting...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-84.png "Page 85
85Setting Display Status
Setting Up Functions from Menus
Selecting a Logo at Startup
[User screen settings] - [Projector on]
You can display a specified logo on a
screen from the moment the projector is
turned on to the moment it is ready fro pro-
jection.
Press the OK button to accept your setting
and then press the MENU button.
[Canon logo] is the factory default.
Selecting Aspect Ratio of Screen
[Screen aspect]
You can select proper option corresponding to
the aspect ratio of the projecting...")
85Setting Display Status Setting Up Functions from Menus Selecting a Logo at Startup [User screen settings] - [Projector on] You can display a specified logo on a screen from the moment the projector is turned on to the moment it is ready fro pro- jection. Press the OK button to accept your setting and then press the MENU button. [Canon logo] is the factory default. Selecting Aspect Ratio of Screen [Screen aspect] You can select proper option corresponding to the aspect ratio of the projecting...
Page 86
![Page 86
86
Setting the Image Quality
Selecting an Image Quality
[Image mode]
You can select an image mode suitable for
the projecting image.
You can select it also with the IMAGE but-
ton on the remote control. (P63)
Press the OK button to accept your setting
and then press the MENU button.
[Standard] is the factory default.
You can decide the image quality by
adjusting the following items in each
image mode:
[Brightness], [Contrast], [Sharpness],
[Gamma], [Color adjustment],
[Advanced adjustment] and...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-85.png "Page 86
86
Setting the Image Quality
Selecting an Image Quality
[Image mode]
You can select an image mode suitable for
the projecting image.
You can select it also with the IMAGE but-
ton on the remote control. (P63)
Press the OK button to accept your setting
and then press the MENU button.
[Standard] is the factory default.
You can decide the image quality by
adjusting the following items in each
image mode:
[Brightness], [Contrast], [Sharpness],
[Gamma], [Color adjustment],
[Advanced adjustment] and...")
86 Setting the Image Quality Selecting an Image Quality [Image mode] You can select an image mode suitable for the projecting image. You can select it also with the IMAGE but- ton on the remote control. (P63) Press the OK button to accept your setting and then press the MENU button. [Standard] is the factory default. You can decide the image quality by adjusting the following items in each image mode: [Brightness], [Contrast], [Sharpness], [Gamma], [Color adjustment], [Advanced adjustment] and...
Page 87
![Page 87
87Setting the Image Quality
Setting Up Functions from Menus
Adjusting the Brightness
[Brightness]
You can adjust the brightness of images.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Adjusting the Contrast
[Contrast]
You can adjust the contrast of images.
If you want to make it more or less vivid,
adjust the difference in tone between the
lightest and darkest portions...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-86.png "Page 87
87Setting the Image Quality
Setting Up Functions from Menus
Adjusting the Brightness
[Brightness]
You can adjust the brightness of images.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Adjusting the Contrast
[Contrast]
You can adjust the contrast of images.
If you want to make it more or less vivid,
adjust the difference in tone between the
lightest and darkest portions...")
87Setting the Image Quality Setting Up Functions from Menus Adjusting the Brightness [Brightness] You can adjust the brightness of images. When you have completed the adjust- ment, press the MENU button. The adjustment you have made is stored as an adjusted value of input sig- nals being projected in an image mode. Adjusting the Contrast [Contrast] You can adjust the contrast of images. If you want to make it more or less vivid, adjust the difference in tone between the lightest and darkest portions...
Page 88
![Page 88
Setting the Image Quality
88
Adjusting the Sharpness
[Sharpness]
You can adjust the sharpness of images.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Making a Gamma Correction
[Gamma]
You can correct the obscure portion of an
image due to too dark or bright.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is
stored as an...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-87.png "Page 88
Setting the Image Quality
88
Adjusting the Sharpness
[Sharpness]
You can adjust the sharpness of images.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Making a Gamma Correction
[Gamma]
You can correct the obscure portion of an
image due to too dark or bright.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is
stored as an...")
Setting the Image Quality 88 Adjusting the Sharpness [Sharpness] You can adjust the sharpness of images. When you have completed the adjust- ment, press the MENU button. The adjustment you have made is stored as an adjusted value of input sig- nals being projected in an image mode. Making a Gamma Correction [Gamma] You can correct the obscure portion of an image due to too dark or bright. When you have completed the adjust- ment, press the MENU button. The adjustment you have made is stored as an...
Page 89
![Page 89
89Setting the Image Quality
Setting Up Functions from Menus
Making Color Adjustment (HDMI)
[Color adjustment]
You can adjust the color quality of images for
each of primary colors, red, green and blue.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Adjusting a color makes mark shown
in [Color adjustment] in the menu.
Making Color Adjustment (DIGITAL PC/
ANALOG PC)...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-88.png "Page 89
89Setting the Image Quality
Setting Up Functions from Menus
Making Color Adjustment (HDMI)
[Color adjustment]
You can adjust the color quality of images for
each of primary colors, red, green and blue.
When you have completed the adjust-
ment, press the MENU button.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Adjusting a color makes mark shown
in [Color adjustment] in the menu.
Making Color Adjustment (DIGITAL PC/
ANALOG PC)...")
89Setting the Image Quality Setting Up Functions from Menus Making Color Adjustment (HDMI) [Color adjustment] You can adjust the color quality of images for each of primary colors, red, green and blue. When you have completed the adjust- ment, press the MENU button. The adjustment you have made is stored as an adjusted value of input sig- nals being projected in an image mode. Adjusting a color makes mark shown in [Color adjustment] in the menu. Making Color Adjustment (DIGITAL PC/ ANALOG PC)...
Page 90
![Page 90
Setting the Image Quality
90
Making Color Adjustment (COMPONENT/
VIDEO)
[Color adjustment]
You can adjust the color depth and hue of
images for each of primary colors, red,
green and blue.
When you have completed the adjust-
ment, press the MENU button.
You cannot adjust the color balance in
[Video] except NTSC.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Making Advanced Adjustment (Noise reduc-
tion)
[Advanced adjustment] -...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-89.png "Page 90
Setting the Image Quality
90
Making Color Adjustment (COMPONENT/
VIDEO)
[Color adjustment]
You can adjust the color depth and hue of
images for each of primary colors, red,
green and blue.
When you have completed the adjust-
ment, press the MENU button.
You cannot adjust the color balance in
[Video] except NTSC.
The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Making Advanced Adjustment (Noise reduc-
tion)
[Advanced adjustment] -...")
Setting the Image Quality 90 Making Color Adjustment (COMPONENT/ VIDEO) [Color adjustment] You can adjust the color depth and hue of images for each of primary colors, red, green and blue. When you have completed the adjust- ment, press the MENU button. You cannot adjust the color balance in [Video] except NTSC. The adjustment you have made is stored as an adjusted value of input sig- nals being projected in an image mode. Making Advanced Adjustment (Noise reduc- tion) [Advanced adjustment] -...