Canon Projector WUX10 Mark II User Manual
Here you can view all the pages of manual Canon Projector WUX10 Mark II User Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
111Setting Network
Connecting the Projector to Network
4If the SMTP mail server authentication is required, click [Mail auth], enter appropriate
values in the following field, and click the [OK] button.
Select one of the following four authentication method in [Mail authentication]. Select
[OFF] if the mail authentication is not required (the factory default is [OFF]).
[LOGIN (SMTP authentication)], [CRAM-MD5 (SMTP authentication)],
[USER/PASS (POP before SMTP)], [APOP (POP before SMTP)]
Setting...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-110.png "Page 111
111Setting Network
Connecting the Projector to Network
4If the SMTP mail server authentication is required, click [Mail auth], enter appropriate
values in the following field, and click the [OK] button.
Select one of the following four authentication method in [Mail authentication]. Select
[OFF] if the mail authentication is not required (the factory default is [OFF]).
[LOGIN (SMTP authentication)], [CRAM-MD5 (SMTP authentication)],
[USER/PASS (POP before SMTP)], [APOP (POP before SMTP)]
Setting...")
111Setting Network Connecting the Projector to Network 4If the SMTP mail server authentication is required, click [Mail auth], enter appropriate values in the following field, and click the [OK] button. Select one of the following four authentication method in [Mail authentication]. Select [OFF] if the mail authentication is not required (the factory default is [OFF]). [LOGIN (SMTP authentication)], [CRAM-MD5 (SMTP authentication)], [USER/PASS (POP before SMTP)], [APOP (POP before SMTP)] Setting...
Page 112
![Page 112
Setting Network
112
5If you want to monitor the projector, click [SNMP], enter appropriate values in the fol-
lowing field, and click the [OK] button.
Select one of the following four SNMP version in [SNMP]. Select [OFF] if you dont
want to monitor the projector.
(The factory default: [OFF])
[V1], [V2c], [V3 (MD5)], [V3 (DES, MD5)]
Setting items:
[Receive community]: The name of the community (user)
[Password]: The password for the community setting
[Confirm password]: The password for confirmation...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-111.png "Page 112
Setting Network
112
5If you want to monitor the projector, click [SNMP], enter appropriate values in the fol-
lowing field, and click the [OK] button.
Select one of the following four SNMP version in [SNMP]. Select [OFF] if you dont
want to monitor the projector.
(The factory default: [OFF])
[V1], [V2c], [V3 (MD5)], [V3 (DES, MD5)]
Setting items:
[Receive community]: The name of the community (user)
[Password]: The password for the community setting
[Confirm password]: The password for confirmation...")
Setting Network 112 5If you want to monitor the projector, click [SNMP], enter appropriate values in the fol- lowing field, and click the [OK] button. Select one of the following four SNMP version in [SNMP]. Select [OFF] if you dont want to monitor the projector. (The factory default: [OFF]) [V1], [V2c], [V3 (MD5)], [V3 (DES, MD5)] Setting items: [Receive community]: The name of the community (user) [Password]: The password for the community setting [Confirm password]: The password for confirmation...
Page 113
![Page 113
113Setting Network
Connecting the Projector to Network
6Click [Projector info] and enter the projector name.
You can input 1 to 63 alphanumeric characters.
The factory default is [WUX10 MarkII].
7Click [Location], enter the projector location, and click the [OK] button.
You can input up to 63 alphanumeric characters.
The factory default is blank.
8Click [Apply] when you have completed each menu.
Click the [OK] button when the following dialog box is displayed.
The network setting of the projector...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-112.png "Page 113
113Setting Network
Connecting the Projector to Network
6Click [Projector info] and enter the projector name.
You can input 1 to 63 alphanumeric characters.
The factory default is [WUX10 MarkII].
7Click [Location], enter the projector location, and click the [OK] button.
You can input up to 63 alphanumeric characters.
The factory default is blank.
8Click [Apply] when you have completed each menu.
Click the [OK] button when the following dialog box is displayed.
The network setting of the projector...")
113Setting Network Connecting the Projector to Network 6Click [Projector info] and enter the projector name. You can input 1 to 63 alphanumeric characters. The factory default is [WUX10 MarkII]. 7Click [Location], enter the projector location, and click the [OK] button. You can input up to 63 alphanumeric characters. The factory default is blank. 8Click [Apply] when you have completed each menu. Click the [OK] button when the following dialog box is displayed. The network setting of the projector...
Page 114
![Page 114
Setting Network
114
■Resetting the Network Setting
1Click [Initialize] in the menu screen.
2Click the [OK] button when the following dialog box is displayed.
If you want to restore to the factory setting from the projector, perform [Network set-
ting initialization] from the menu.](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-113.png "Page 114
Setting Network
114
■Resetting the Network Setting
1Click [Initialize] in the menu screen.
2Click the [OK] button when the following dialog box is displayed.
If you want to restore to the factory setting from the projector, perform [Network set-
ting initialization] from the menu.")
Setting Network 114 ■Resetting the Network Setting 1Click [Initialize] in the menu screen. 2Click the [OK] button when the following dialog box is displayed. If you want to restore to the factory setting from the projector, perform [Network set- ting initialization] from the menu.
Page 115
115Setting Network Connecting the Projector to Network ■Error Notification Message It sends the following message when an error occurs in the projector. Error list * Contact your Canon dealer.Errors related to temperatureError name Temperature abnormality Te x tThe temperature inside the projector is too high for some reason or the outside air temperature is higher than the specified one. If the problem is inside the projector, check whether the projector is installed and operated normally, turn off...
Page 116
![Page 116
Setting Network
116
■Projector Control
1Click the [Projector control] button on the network setting screen.
The projector control screen appears.
Controlled items:
[Power]: Turn ON/OFF the projector (P44, P64)
[Input]: Select an input signal (P49)
[Aspect]: Select an aspect ratio (P57)
[Image mode]: Select an image mode (P63)
[Blank]: Blank out the image temporarily (P66)
[Mute]: Mute the sound temporarily (P67)
[Auto setup]: Perform the auto setup function (P47)
[Auto PC]: Perform the auto PC function...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-115.png "Page 116
Setting Network
116
■Projector Control
1Click the [Projector control] button on the network setting screen.
The projector control screen appears.
Controlled items:
[Power]: Turn ON/OFF the projector (P44, P64)
[Input]: Select an input signal (P49)
[Aspect]: Select an aspect ratio (P57)
[Image mode]: Select an image mode (P63)
[Blank]: Blank out the image temporarily (P66)
[Mute]: Mute the sound temporarily (P67)
[Auto setup]: Perform the auto setup function (P47)
[Auto PC]: Perform the auto PC function...")
Setting Network 116 ■Projector Control 1Click the [Projector control] button on the network setting screen. The projector control screen appears. Controlled items: [Power]: Turn ON/OFF the projector (P44, P64) [Input]: Select an input signal (P49) [Aspect]: Select an aspect ratio (P57) [Image mode]: Select an image mode (P63) [Blank]: Blank out the image temporarily (P66) [Mute]: Mute the sound temporarily (P67) [Auto setup]: Perform the auto setup function (P47) [Auto PC]: Perform the auto PC function...
Page 117
117 Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Up Functions from Menus Connecting the Projector to Network Appendix Index Appendix
Page 118
118 Troubleshooting WARNING Lamp Flash Patterns The WARNING lamp on the Control Panel flashes in red after the projector is turned off when there is a trouble in the projector. Wait until the cooling fan stops and disconnect the power plug from the AC outlet before dealing with the trouble. Flash Pattern Meaning Countermeasure One flash Temperature, abnormalityThe temperature inside the projector is too high for some reason or the outside air temperature is higher than the specified one. If the...
Page 119
![Page 119
119Troubleshooting
Appendix
Symptoms and Solutions
■You cannot turn on the projector.
■You cannot project an image from the projector.
Cause Countermeasure
The power cord is not connected
correctly.Check whether the power cord is connected correctly. (P44)
Check that [Key lock] is not enabled. (P97)
The power cord has just been con-
nected.You cannot turn on the projector until the POWER indicator
turns red after connecting the power plug. (P44)
The lamp cover is open.
Unplug the power cord from the...](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-118.png "Page 119
119Troubleshooting
Appendix
Symptoms and Solutions
■You cannot turn on the projector.
■You cannot project an image from the projector.
Cause Countermeasure
The power cord is not connected
correctly.Check whether the power cord is connected correctly. (P44)
Check that [Key lock] is not enabled. (P97)
The power cord has just been con-
nected.You cannot turn on the projector until the POWER indicator
turns red after connecting the power plug. (P44)
The lamp cover is open.
Unplug the power cord from the...")
119Troubleshooting Appendix Symptoms and Solutions ■You cannot turn on the projector. ■You cannot project an image from the projector. Cause Countermeasure The power cord is not connected correctly.Check whether the power cord is connected correctly. (P44) Check that [Key lock] is not enabled. (P97) The power cord has just been con- nected.You cannot turn on the projector until the POWER indicator turns red after connecting the power plug. (P44) The lamp cover is open. Unplug the power cord from the...
Page 120
![Page 120
Troubleshooting
120
■You cannot hear sound.
Cause Countermeasure
The external monitor output is not
set on the notebook computer cor-
rectly.Turn on the external monitor output on the notebook com-
puter. To turn on the external monitor output, press the [LCD]
or [VGA] function key or a key with an icon for the external
monitor, while holding down the [Fn] key on the keyboard of
the notebook computer. (P46)
The combination of keys used to perform this operation varies
among computer manufacturers....](http://img.usermanuals.tech/thumb/14/99166/w300_projector_manual_5015_d-119.png "Page 120
Troubleshooting
120
■You cannot hear sound.
Cause Countermeasure
The external monitor output is not
set on the notebook computer cor-
rectly.Turn on the external monitor output on the notebook com-
puter. To turn on the external monitor output, press the [LCD]
or [VGA] function key or a key with an icon for the external
monitor, while holding down the [Fn] key on the keyboard of
the notebook computer. (P46)
The combination of keys used to perform this operation varies
among computer manufacturers....")
Troubleshooting 120 ■You cannot hear sound. Cause Countermeasure The external monitor output is not set on the notebook computer cor- rectly.Turn on the external monitor output on the notebook com- puter. To turn on the external monitor output, press the [LCD] or [VGA] function key or a key with an icon for the external monitor, while holding down the [Fn] key on the keyboard of the notebook computer. (P46) The combination of keys used to perform this operation varies among computer manufacturers....